/**************************************************************************** * net/icmpv6/icmpv6_rnotify.c * * Copyright (C) 2015-2016 Gregory Nutt. All rights reserved. * Author: Gregory Nutt * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in * the documentation and/or other materials provided with the * distribution. * 3. Neither the name NuttX nor the names of its contributors may be * used to endorse or promote products derived from this software * without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE * POSSIBILITY OF SUCH DAMAGE. * ****************************************************************************/ /**************************************************************************** * Included Files ****************************************************************************/ #include #include #include #include #include #include #include #include #include #include #include #include "netdev/netdev.h" #include "utils/utils.h" #include "icmpv6/icmpv6.h" #ifdef CONFIG_NET_ICMPv6_AUTOCONF /**************************************************************************** * Pre-processor Definitions ****************************************************************************/ /**************************************************************************** * Private Types ****************************************************************************/ /**************************************************************************** * Private Data ****************************************************************************/ /* List of tasks waiting for Neighbor Discover events */ static struct icmpv6_rnotify_s *g_icmpv6_rwaiters; /**************************************************************************** * Private Functions ****************************************************************************/ /**************************************************************************** * Name: icmpv6_setaddresses * * Description: * We successfully obtained the Router Advertisement. See the new IPv6 * addresses in the driver structure. * ****************************************************************************/ static void icmpv6_setaddresses(FAR struct net_driver_s *dev, const net_ipv6addr_t draddr, const net_ipv6addr_t prefix, unsigned int preflen) { unsigned int i; /* Make sure that the network is down before changing any addresses */ netdev_ifdown(dev); /* Create an address mask from the prefix */ if (preflen > 128) { preflen = 128; } net_ipv6_pref2mask(preflen, dev->d_ipv6netmask); ninfo("preflen=%d netmask=%04x:%04x:%04x:%04x:%04x:%04x:%04x:%04x\n", preflen, dev->d_ipv6netmask[0], dev->d_ipv6netmask[1], dev->d_ipv6netmask[2], dev->d_ipv6netmask[3], dev->d_ipv6netmask[4], dev->d_ipv6netmask[5], dev->d_ipv6netmask[6], dev->d_ipv6netmask[7]); /* Copy prefix to the current IPv6 address, applying the mask */ for (i = 0; i < 7; i++) { dev->d_ipv6addr[i] = (dev->d_ipv6addr[i] & ~dev->d_ipv6netmask[i]) | (prefix[i] & dev->d_ipv6netmask[i]); } ninfo("prefix=%04x:%04x:%04x:%04x:%04x:%04x:%04x:%04x\n", prefix[0], prefix[1], prefix[2], prefix[3], prefix[4], prefix[6], prefix[6], prefix[7]); ninfo("IP address=%04x:%04x:%04x:%04x:%04x:%04x:%04x:%04x\n", dev->d_ipv6addr[0], dev->d_ipv6addr[1], dev->d_ipv6addr[2], dev->d_ipv6addr[3], dev->d_ipv6addr[4], dev->d_ipv6addr[6], dev->d_ipv6addr[6], dev->d_ipv6addr[7]); /* Finally, copy the router address */ net_ipv6addr_copy(dev->d_ipv6draddr, draddr); ninfo("DR address=%04x:%04x:%04x:%04x:%04x:%04x:%04x:%04x\n", dev->d_ipv6draddr[0], dev->d_ipv6draddr[1], dev->d_ipv6draddr[2], dev->d_ipv6draddr[3], dev->d_ipv6draddr[4], dev->d_ipv6draddr[6], dev->d_ipv6draddr[6], dev->d_ipv6draddr[7]); } /**************************************************************************** * Public Functions ****************************************************************************/ /**************************************************************************** * Name: icmpv6_rwait_setup * * Description: * Called BEFORE an Router Solicitation is sent. This function sets up * the Router Advertisement timeout before the Router Solicitation * is sent so that there is no race condition when icmpv6_rwait() is * called. * * Assumptions: * This function is called from icmpv6_autoconfig() and executes in the * normal tasking environment. * ****************************************************************************/ void icmpv6_rwait_setup(FAR struct net_driver_s *dev, FAR struct icmpv6_rnotify_s *notify) { irqstate_t flags; /* Initialize the wait structure */ memcpy(notify->rn_ifname, dev->d_ifname, IFNAMSIZ); notify->rn_result = -ETIMEDOUT; /* This semaphore is used for signaling and, hence, should not have * priority inheritance enabled. */ (void)nxsem_init(¬ify->rn_sem, 0, 0); nxsem_setprotocol(¬ify->rn_sem, SEM_PRIO_NONE); /* Add the wait structure to the list with interrupts disabled */ flags = enter_critical_section(); notify->rn_flink = g_icmpv6_rwaiters; g_icmpv6_rwaiters = notify; leave_critical_section(flags); } /**************************************************************************** * Name: icmpv6_rwait_cancel * * Description: * Cancel any wait set after icmpv6_rwait_setup() is called but before * icmpv6_rwait()is called (icmpv6_rwait() will automatically cancel the * wait). * * Assumptions: * This function may execute in the interrupt context when called from * icmpv6_rwait(). * ****************************************************************************/ int icmpv6_rwait_cancel(FAR struct icmpv6_rnotify_s *notify) { FAR struct icmpv6_rnotify_s *curr; FAR struct icmpv6_rnotify_s *prev; irqstate_t flags; int ret = -ENOENT; ninfo("Cancelling...\n"); /* Remove our wait structure from the list (we may no longer be at the * head of the list). */ flags = enter_critical_section(); for (prev = NULL, curr = g_icmpv6_rwaiters; curr && curr != notify; prev = curr, curr = curr->rn_flink); DEBUGASSERT(curr && curr == notify); if (curr) { if (prev) { prev->rn_flink = notify->rn_flink; } else { g_icmpv6_rwaiters = notify->rn_flink; } ret = OK; } leave_critical_section(flags); (void)nxsem_destroy(¬ify->rn_sem); return ret; } /**************************************************************************** * Name: icmpv6_rwait * * Description: * Called each time that a Router Solicitation is sent. This function * will sleep until either: (1) the matching Router Advertisement is * received, or (2) a timeout occurs. * * Assumptions: * This function is called from icmpv6_autoconfig() and must execute with * the network locked. * ****************************************************************************/ int icmpv6_rwait(FAR struct icmpv6_rnotify_s *notify, FAR struct timespec *timeout) { struct timespec abstime; irqstate_t flags; int ret; ninfo("Waiting...\n"); /* And wait for the Neighbor Advertisement (or a timeout). Interrupts will * be re-enabled while we wait. */ flags = enter_critical_section(); DEBUGVERIFY(clock_gettime(CLOCK_REALTIME, &abstime)); abstime.tv_sec += timeout->tv_sec; abstime.tv_nsec += timeout->tv_nsec; if (abstime.tv_nsec >= 1000000000) { abstime.tv_sec++; abstime.tv_nsec -= 1000000000; } /* REVISIT: If net_timedwait() is awakened with signal, we will return * the wrong error code. */ (void)net_timedwait(¬ify->rn_sem, &abstime); ret = notify->rn_result; /* Remove our wait structure from the list (we may no longer be at the * head of the list). */ (void)icmpv6_rwait_cancel(notify); /* Re-enable interrupts and return the result of the wait */ leave_critical_section(flags); return ret; } /**************************************************************************** * Name: icmpv6_rnotify * * Description: * Called each time that a Router Advertisement is received in order to * wake-up any threads that may be waiting for this particular Router * Advertisement. * * NOTE: On success the network has the new address applied and is in * the down state. * * Assumptions: * This function is called from the MAC device driver indirectly through * icmpv6_icmpv6in() will execute with the network locked. * ****************************************************************************/ void icmpv6_rnotify(FAR struct net_driver_s *dev, const net_ipv6addr_t draddr, const net_ipv6addr_t prefix, unsigned int preflen) { FAR struct icmpv6_rnotify_s *curr; ninfo("Notified\n"); /* Find an entry with the matching device name in the list of waiters */ for (curr = g_icmpv6_rwaiters; curr; curr = curr->rn_flink) { /* Does this entry match? If the result is okay, then we have * already notified this waiter and it has not yet taken the * entry from the list. */ if (curr->rn_result != OK && strncmp(curr->rn_ifname, dev->d_ifname, IFNAMSIZ) == 0) { /* Yes.. Set the new network addresses. */ icmpv6_setaddresses(dev, draddr, prefix, preflen); /* And signal the waiting, returning success */ curr->rn_result = OK; nxsem_post(&curr->rn_sem); break; } } } #endif /* CONFIG_NET_ICMPv6_AUTOCONF */