/**************************************************************************** * net/pkt/pkt.h * * Copyright (C) 2014 Gregory Nutt. All rights reserved. * Author: Gregory Nutt * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in * the documentation and/or other materials provided with the * distribution. * 3. Neither the name NuttX nor the names of its contributors may be * used to endorse or promote products derived from this software * without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE * POSSIBILITY OF SUCH DAMAGE. * ****************************************************************************/ #ifndef _NET_PKT_PKT_H #define _NET_PKT_PKT_H /**************************************************************************** * Included Files ****************************************************************************/ #include #include #ifdef CONFIG_NET_PKT /**************************************************************************** * Pre-processor Definitions ****************************************************************************/ /* Allocate a new packet socket data callback */ #define pkt_callback_alloc(dev,conn) devif_callback_alloc(dev, &conn->list) #define pkt_callback_free(dev,conn,cb) devif_callback_free(dev, cb, &conn->list) /**************************************************************************** * Public Type Definitions ****************************************************************************/ /* Representation of a uIP packet socket connection */ struct devif_callback_s; /* Forward reference */ struct pkt_conn_s { dq_entry_t node; /* Supports a double linked list */ uint8_t lmac[6]; /* The local Ethernet address in network byte order */ uint8_t ifindex; uint16_t proto; uint8_t crefs; /* Reference counts on this instance */ /* Defines the list of packet callbacks */ struct devif_callback_s *list; }; /**************************************************************************** * Public Data ****************************************************************************/ #ifdef __cplusplus # define EXTERN extern "C" extern "C" { #else # define EXTERN extern #endif /**************************************************************************** * Public Function Prototypes ****************************************************************************/ struct eth_hdr_s; /* Forward reference */ /* Defined in pkt_conn.c ****************************************************/ /**************************************************************************** * Name: pkt_initialize() * * Description: * Initialize the packet socket connection structures. Called once and * only from the network initialization logic. * ****************************************************************************/ void pkt_initialize(void); /**************************************************************************** * Name: pkt_palloc() * * Description: * Allocate a new, uninitialized packet socket connection structure. This * is normally something done by the implementation of the socket() API * ****************************************************************************/ FAR struct pkt_conn_s *pkt_alloc(void); /**************************************************************************** * Name: pkt_free() * * Description: * Free a packet socket connection structure that is no longer in use. * This should be done by the implementation of close(). * ****************************************************************************/ void pkt_free(FAR struct pkt_conn_s *conn); /**************************************************************************** * Name: pkt_active() * * Description: * Find a connection structure that is the appropriate * connection to be used with the provided Ethernet header * * Assumptions: * This function is called from UIP logic at interrupt level * ****************************************************************************/ struct pkt_conn_s *pkt_active(FAR struct eth_hdr_s *buf); /**************************************************************************** * Name: pkt_nextconn() * * Description: * Traverse the list of allocated packet connections * * Assumptions: * This function is called from UIP logic at interrupt level (or with * interrupts disabled). * ****************************************************************************/ struct pkt_conn_s *pkt_nextconn(FAR struct pkt_conn_s *conn); /* Defined in pkt_callback.c ************************************************/ /**************************************************************************** * Function: pkt_callback * * Description: * Inform the application holding the packet socket of a change in state. * * Returned Value: * OK if packet has been processed, otherwise ERROR. * * Assumptions: * This function is called at the interrupt level with interrupts disabled. * ****************************************************************************/ uint16_t pkt_callback(FAR struct net_driver_s *dev, FAR struct pkt_conn_s *conn, uint16_t flags); /* Defined in pkt_input.c ***************************************************/ /**************************************************************************** * Name: pkt_input * * Description: * Handle incoming packet input * * Parameters: * dev - The device driver structure containing the received packet * * Return: * OK The packet has been processed and can be deleted * ERROR Hold the packet and try again later. There is a listening socket * but no recv in place to catch the packet yet. * * Assumptions: * Called from the interrupt level or with interrupts disabled. * ****************************************************************************/ /* pkt_input() is prototyped in include/nuttx/net/pkt.h */ /**************************************************************************** * Function: pkt_find_device * * Description: * Select the network driver to use with the PKT transaction. * * Input Parameters: * conn - PKT connection structure (not currently used). * * Returned Value: * A pointer to the network driver to use. * ****************************************************************************/ FAR struct net_driver_s *pkt_find_device(FAR struct pkt_conn_s *conn); /**************************************************************************** * Name: pkt_poll * * Description: * Poll a packet "connection" structure for availability of TX data * * Parameters: * dev - The device driver structure to use in the send operation * conn - The packet "connection" to poll for TX data * * Return: * None * * Assumptions: * Called from the interrupt level or with interrupts disabled. * ****************************************************************************/ void pkt_poll(FAR struct net_driver_s *dev, FAR struct pkt_conn_s *conn); /**************************************************************************** * Function: psock_pkt_send * * Description: * The psock_pkt_send() call may be used only when the packet socket is in a * connected state (so that the intended recipient is known). * * Parameters: * psock An instance of the internal socket structure. * buf Data to send * len Length of data to send * * Returned Value: * On success, returns the number of characters sent. On error, * -1 is returned, and errno is set appropriately: * * EAGAIN or EWOULDBLOCK * The socket is marked non-blocking and the requested operation * would block. * EBADF * An invalid descriptor was specified. * ECONNRESET * Connection reset by peer. * EDESTADDRREQ * The socket is not connection-mode, and no peer address is set. * EFAULT * An invalid user space address was specified for a parameter. * EINTR * A signal occurred before any data was transmitted. * EINVAL * Invalid argument passed. * EISCONN * The connection-mode socket was connected already but a recipient * was specified. (Now either this error is returned, or the recipient * specification is ignored.) * EMSGSIZE * The socket type requires that message be sent atomically, and the * size of the message to be sent made this impossible. * ENOBUFS * The output queue for a network interface was full. This generally * indicates that the interface has stopped sending, but may be * caused by transient congestion. * ENOMEM * No memory available. * ENOTCONN * The socket is not connected, and no target has been given. * ENOTSOCK * The argument s is not a socket. * EPIPE * The local end has been shut down on a connection oriented socket. * In this case the process will also receive a SIGPIPE unless * MSG_NOSIGNAL is set. * * Assumptions: * ****************************************************************************/ struct socket; ssize_t psock_pkt_send(FAR struct socket *psock, FAR const void *buf, size_t len); #undef EXTERN #ifdef __cplusplus } #endif #endif /* CONFIG_NET_PKT */ #endif /* _NET_PKT_PKT_H */