/**************************************************************************** * net/net_initialize.c * * Copyright (C) 2007-2009, 2011-2015, 2017-2018 Gregory Nutt. All rights * reserved. * Author: Gregory Nutt * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in * the documentation and/or other materials provided with the * distribution. * 3. Neither the name NuttX nor the names of its contributors may be * used to endorse or promote products derived from this software * without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE * POSSIBILITY OF SUCH DAMAGE. * ****************************************************************************/ /**************************************************************************** * Included Files ****************************************************************************/ #include #ifdef CONFIG_NET #include #include #include "socket/socket.h" #include "devif/devif.h" #include "netdev/netdev.h" #include "ipforward/ipforward.h" #include "arp/arp.h" #include "sixlowpan/sixlowpan.h" #include "neighbor/neighbor.h" #include "icmp/icmp.h" #include "icmpv6/icmpv6.h" #include "tcp/tcp.h" #include "udp/udp.h" #include "pkt/pkt.h" #include "bluetooth/bluetooth.h" #include "ieee802154/ieee802154.h" #include "local/local.h" #include "netlink/netlink.h" #include "igmp/igmp.h" #include "route/route.h" #include "usrsock/usrsock.h" #include "utils/utils.h" /**************************************************************************** * Public Functions ****************************************************************************/ /**************************************************************************** * Name: net_setup * * Description: * This is called from the OS initialization logic at power-up reset in * order to configure networking data structures. This is called prior * to platform-specific driver initialization so that the networking * subsystem is prepared to deal with network driver initialization * actions. * * Actions performed in this initialization phase assume that base OS * facilities such as semaphores are available but this logic cannot * depend upon OS resources such as interrupts or timers which are not * yet available. * * Input Parameters: * None * * Returned Value: * None * ****************************************************************************/ void net_setup(void) { /* Initialize the locking facility */ net_lockinitialize(); /* Clear the ARP table */ arp_reset(); #ifdef CONFIG_NET_IPv6 /* Initialize the Neighbor Table data structures */ neighbor_initialize(); #ifdef CONFIG_NET_6LOWPAN /* Initialize 6LoWPAN data structures */ sixlowpan_initialize(); #endif #endif /* CONFIG_NET_IPv6 */ /* Initialize the device interface layer */ devif_initialize(); #ifdef HAVE_FWDALLOC /* Initialize IP forwarding support */ ipfwd_initialize(); #endif #ifdef CONFIG_NET_PKT /* Initialize packet socket support */ pkt_initialize(); #endif #ifdef CONFIG_NET_ICMP_SOCKET /* Initialize IPPPROTO_ICMP socket support */ icmp_sock_initialize(); #endif #ifdef CONFIG_NET_ICMPv6_SOCKET /* Initialize IPPPROTO_ICMP6 socket support */ icmpv6_sock_initialize(); #endif #ifdef CONFIG_NET_BLUETOOTH /* Initialize Bluetooth socket support */ bluetooth_initialize(); #endif #ifdef CONFIG_NET_IEEE802154 /* Initialize IEEE 802.15.4 socket support */ ieee802154_initialize(); #endif #ifdef CONFIG_NET_LOCAL /* Initialize the local, "Unix domain" socket support */ local_initialize(); #endif #ifdef CONFIG_NET_NETLINK /* Initialize the Netlink IPC support */ netlink_initialize(); #endif #ifdef NET_TCP_HAVE_STACK /* Initialize the listening port structures */ tcp_listen_initialize(); /* Initialize the TCP/IP connection structures */ tcp_initialize(); /* Initialize the TCP/IP write buffering */ #ifdef CONFIG_NET_TCP_WRITE_BUFFERS tcp_wrbuffer_initialize(); #endif #endif /* CONFIG_NET_TCP */ #ifdef NET_UDP_HAVE_STACK /* Initialize the UDP connection structures */ udp_initialize(); #ifdef CONFIG_NET_UDP_WRITE_BUFFERS udp_wrbuffer_initialize(); #endif #endif #ifdef CONFIG_NET_IGMP /* Initialize IGMP support */ igmp_initialize(); #endif #ifdef CONFIG_NET_ROUTE /* Initialize the routing table */ net_init_route(); #endif #ifdef CONFIG_NET_USRSOCK /* Initialize the user-space socket API */ usrsock_initialize(); #endif } /**************************************************************************** * Name: net_initialize * * Description: * This function is called from the OS initialization logic at power-up * reset AFTER initialization of hardware facilities such as timers and * interrupts. This logic completes the initialization started by * net_setup(). * * Input Parameters: * None * * Returned Value: * None * ****************************************************************************/ void net_initialize(void) { /* Initialize the periodic ARP timer */ arp_timer_initialize(); } #endif /* CONFIG_NET */