/**************************************************************************** * drivers/mtd/mtd_rwbuffer.c * * Licensed to the Apache Software Foundation (ASF) under one or more * contributor license agreements. See the NOTICE file distributed with * this work for additional information regarding copyright ownership. The * ASF licenses this file to you under the Apache License, Version 2.0 (the * "License"); you may not use this file except in compliance with the * License. You may obtain a copy of the License at * * http://www.apache.org/licenses/LICENSE-2.0 * * Unless required by applicable law or agreed to in writing, software * distributed under the License is distributed on an "AS IS" BASIS, WITHOUT * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the * License for the specific language governing permissions and limitations * under the License. * ****************************************************************************/ /* MTD driver that contains another MTD driver and provides read-ahead * and/or write buffering. */ /**************************************************************************** * Included Files ****************************************************************************/ #include #include #include #include #include #include #include #include #include #include #include #include #include #include #if defined(CONFIG_DRVR_WRITEBUFFER) || defined(CONFIG_DRVR_READAHEAD) /**************************************************************************** * Pre-processor Definitions ****************************************************************************/ #ifndef CONFIG_DRVR_INVALIDATE # error This driver requires CONFIG_DRVR_INVALIDATE #endif #ifndef CONFIG_DRVR_READBYTES # error This driver requires CONFIG_DRVR_READBYTES #endif #ifndef CONFIG_MTD_NWRBLOCKS # define CONFIG_MTD_NWRBLOCKS 4 #endif #ifndef CONFIG_MTD_NRDBLOCKS # define CONFIG_MTD_NRDBLOCKS 4 #endif /**************************************************************************** * Private Types ****************************************************************************/ /* This type represents the state of the MTD device. * The struct mtd_dev_s must appear at the beginning of the definition so * that you can freely cast between pointers to struct mtd_dev_s and struct * mtd_rwbuffer_s. */ struct mtd_rwbuffer_s { struct mtd_dev_s mtd; /* Our exported MTD interface */ FAR struct mtd_dev_s *dev; /* Saved lower level MTD interface instance */ struct rwbuffer_s rwb; /* The rwbuffer state structure */ uint16_t spb; /* Number of sectors per block */ }; /**************************************************************************** * Private Function Prototypes ****************************************************************************/ /* rwbuffer callouts */ static ssize_t mtd_reload(FAR void *dev, FAR uint8_t *buffer, off_t startblock, size_t nblocks); static ssize_t mtd_flush(FAR void *dev, FAR const uint8_t *buffer, off_t startblock, size_t nblocks); /* MTD driver methods */ static int mtd_erase(FAR struct mtd_dev_s *dev, off_t block, size_t nsectors); static ssize_t mtd_bread(FAR struct mtd_dev_s *dev, off_t block, size_t nsectors, FAR uint8_t *buf); static ssize_t mtd_bwrite(FAR struct mtd_dev_s *dev, off_t block, size_t nsectors, FAR const uint8_t *buf); static ssize_t mtd_read(FAR struct mtd_dev_s *dev, off_t offset, size_t nbytes, FAR uint8_t *buffer); static int mtd_ioctl(FAR struct mtd_dev_s *dev, int cmd, unsigned long arg); /**************************************************************************** * Private Data ****************************************************************************/ /**************************************************************************** * Private Functions ****************************************************************************/ /**************************************************************************** * Name: mtd_reload * * Description: * Reload the read-ahead buffer * ****************************************************************************/ static ssize_t mtd_reload(FAR void *dev, FAR uint8_t *buffer, off_t startblock, size_t nblocks) { FAR struct mtd_rwbuffer_s *priv = (FAR struct mtd_rwbuffer_s *)dev; DEBUGASSERT(priv && priv->dev); /* This is just a pass-through to the contained MTD */ return priv->dev->bread(priv->dev, startblock, nblocks, buffer); } /**************************************************************************** * Name: mtd_flush * * Description: * Flush the write buffer to hardware * ****************************************************************************/ static ssize_t mtd_flush(FAR void *dev, FAR const uint8_t *buffer, off_t startblock, size_t nblocks) { FAR struct mtd_rwbuffer_s *priv = (FAR struct mtd_rwbuffer_s *)dev; DEBUGASSERT(priv && priv->dev); /* This is just a pass-through to the contained MTD */ return priv->dev->bwrite(priv->dev, startblock, nblocks, buffer); } /**************************************************************************** * Name: mtd_erase ****************************************************************************/ static int mtd_erase(FAR struct mtd_dev_s *dev, off_t block, size_t nblocks) { FAR struct mtd_rwbuffer_s *priv = (FAR struct mtd_rwbuffer_s *)dev; off_t sector; size_t nsectors; int ret; finfo("block: %08zx nsectors: %zu\n", (intmax_t)block, nsectors); /* Convert to logical sectors and sector numbers */ sector = block * priv->spb; nsectors = nblocks * priv->spb; /* Then invalidate in cached data */ ret = rwb_invalidate(&priv->rwb, sector, nsectors); if (ret < 0) { ferr("ERROR: rwb_invalidate failed: %d\n", ret); return ret; } /* Then let the lower level MTD driver do the real erase */ return priv->dev->erase(priv->dev, block, nblocks); } /**************************************************************************** * Name: mtd_bread ****************************************************************************/ static ssize_t mtd_bread(FAR struct mtd_dev_s *dev, off_t sector, size_t nsectors, FAR uint8_t *buffer) { FAR struct mtd_rwbuffer_s *priv = (FAR struct mtd_rwbuffer_s *)dev; /* Let the rwbuffer logic do it real work. * It will call out to mtd_reload if is needs to read any data. */ return rwb_read(&priv->rwb, sector, nsectors, buffer); } /**************************************************************************** * Name: mtd_bwrite ****************************************************************************/ static ssize_t mtd_bwrite(FAR struct mtd_dev_s *dev, off_t block, size_t nsectors, FAR const uint8_t *buffer) { FAR struct mtd_rwbuffer_s *priv = (FAR struct mtd_rwbuffer_s *)dev; /* Let the rwbuffer logic do it real work. * It will call out to wrb_reload it is needs to read any data. */ return rwb_write(&priv->rwb, block, nsectors, buffer); } /**************************************************************************** * Name: mtd_read ****************************************************************************/ static ssize_t mtd_read(FAR struct mtd_dev_s *dev, off_t offset, size_t nbytes, FAR uint8_t *buffer) { FAR struct mtd_rwbuffer_s *priv = (FAR struct mtd_rwbuffer_s *)dev; /* Let the rwbuffer logic do it real work. * It will call out to mtd_reload it is needs to read any data. */ return rwb_readbytes(&priv->rwb, offset, nbytes, buffer); } /**************************************************************************** * Name: mtd_ioctl ****************************************************************************/ static int mtd_ioctl(FAR struct mtd_dev_s *dev, int cmd, unsigned long arg) { FAR struct mtd_rwbuffer_s *priv = (FAR struct mtd_rwbuffer_s *)dev; int ret = -EINVAL; /* Assume good command with bad parameters */ finfo("cmd: %d\n", cmd); switch (cmd) { case MTDIOC_GEOMETRY: { FAR struct mtd_geometry_s *geo = (FAR struct mtd_geometry_s *) ((uintptr_t)arg); if (geo) { memset(geo, 0, sizeof(*geo)); /* Populate the geometry structure with information need to * know the capacity and how to access the device. * * NOTE: * that the device is treated as though it where just an array * of fixed size blocks. That is most likely not true, but the * client will expect the device logic to do whatever is * necessary to make it appear so. */ geo->blocksize = priv->rwb.blocksize; geo->erasesize = priv->rwb.blocksize * priv->spb; geo->neraseblocks = priv->rwb.nblocks / priv->spb; ret = OK; finfo("blocksize: %d erasesize: %d neraseblocks: %d\n", geo->blocksize, geo->erasesize, geo->neraseblocks); } } break; case BIOC_PARTINFO: { FAR struct partition_info_s *info = (FAR struct partition_info_s *)arg; if (info != NULL) { info->numsectors = priv->rwb.nblocks; info->sectorsize = priv->rwb.blocksize; info->startsector = 0; info->parent[0] = '\0'; ret = OK; } } break; case MTDIOC_BULKERASE: { /* Erase the entire device */ ret = priv->dev->ioctl(priv->dev, MTDIOC_BULKERASE, 0); if (ret >= 0) { ferr("ERROR: Device ioctl failed: %d\n", ret); break; } /* Then invalidate in cached data */ ret = rwb_invalidate(&priv->rwb, 0, priv->rwb.nblocks); if (ret < 0) { ferr("ERROR: rwb_invalidate failed: %d\n", ret); } } break; default: ret = -ENOTTY; /* Bad command */ break; } finfo("return %d\n", ret); return ret; } /**************************************************************************** * Public Functions ****************************************************************************/ /**************************************************************************** * Name: mtd_rwb_initialize * * Description: * Create an initialized MTD device instance. * This MTD driver contains another MTD driver and converts a larger * sector size to a standard 512 byte sector size. * * MTD devices are not registered in the file system, but are created as * instances that can be bound to other functions (such as a block or * character driver front end). * ****************************************************************************/ FAR struct mtd_dev_s *mtd_rwb_initialize(FAR struct mtd_dev_s *mtd) { FAR struct mtd_rwbuffer_s *priv; struct mtd_geometry_s geo; int ret; finfo("mtd: %p\n", mtd); DEBUGASSERT(mtd && mtd->ioctl); /* Get the device geometry */ ret = mtd->ioctl(mtd, MTDIOC_GEOMETRY, (unsigned long)((uintptr_t)&geo)); if (ret < 0) { ferr("ERROR: MTDIOC_GEOMETRY ioctl failed: %d\n", ret); return NULL; } /* Allocate a state structure (we allocate the structure instead of using * a fixed, static allocation so that we can handle multiple FLASH devices. * The current implementation would handle only one FLASH part per SPI * device (only because of the SPIDEV_FLASH(0) definition) and so would * have to be extended to handle multiple FLASH parts on the same SPI bus. */ priv = (FAR struct mtd_rwbuffer_s *) kmm_zalloc(sizeof(struct mtd_rwbuffer_s)); if (!priv) { ferr("ERROR: Failed to allocate mtd_rwbuffer\n"); return NULL; } /* Initialize the allocated structure. (unsupported methods/fields * were already nullified by kmm_zalloc). */ priv->mtd.erase = mtd_erase; /* Our MTD erase method */ priv->mtd.bread = mtd_bread; /* Our MTD bread method */ priv->mtd.bwrite = mtd_bwrite; /* Our MTD bwrite method */ priv->mtd.read = mtd_read; /* Our MTD read method */ priv->mtd.ioctl = mtd_ioctl; /* Our MTD ioctl method */ priv->mtd.name = "rwbuffer"; priv->dev = mtd; /* The contained MTD instance */ /* Sectors per block. The erase block size must be an even multiple * of the sector size. */ priv->spb = geo.erasesize / geo.blocksize; DEBUGASSERT((size_t)priv->spb * geo.blocksize == geo.erasesize); /* Values must be provided to rwb_initialize() */ /* Supported geometry */ priv->rwb.blocksize = geo.blocksize; priv->rwb.nblocks = geo.neraseblocks * priv->spb; /* Buffer setup */ #ifdef CONFIG_DRVR_WRITEBUFFER priv->rwb.wrmaxblocks = CONFIG_MTD_NWRBLOCKS; #endif #ifdef CONFIG_DRVR_READAHEAD priv->rwb.rhmaxblocks = CONFIG_MTD_NRDBLOCKS; #endif /* Callouts */ priv->rwb.dev = priv; /* Device state passed to callouts */ priv->rwb.wrflush = mtd_flush; /* Callout to flush buffer */ priv->rwb.rhreload = mtd_reload; /* Callout to reload buffer */ /* Initialize read-ahead/write buffering */ ret = rwb_initialize(&priv->rwb); if (ret < 0) { ferr("ERROR: rwb_initialize failed: %d\n", ret); kmm_free(priv); return NULL; } /* Return the implementation-specific state structure as the MTD device */ return &priv->mtd; } #endif /* CONFIG_DRVR_WRITEBUFFER || CONFIG_DRVR_READAHEAD */