/**************************************************************************** * include/sys/boardctl.h * * Copyright (C) 2015-2016 Gregory Nutt. All rights reserved. * Author: Gregory Nutt * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in * the documentation and/or other materials provided with the * distribution. * 3. Neither the name NuttX nor the names of its contributors may be * used to endorse or promote products derived from this software * without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE * POSSIBILITY OF SUCH DAMAGE. * ****************************************************************************/ #ifndef __INCLUDE_SYS_BOARDCTL_H #define __INCLUDE_SYS_BOARDCTL_H /**************************************************************************** * Included Files ****************************************************************************/ #include #include #include #ifdef CONFIG_LIB_BOARDCTL /**************************************************************************** * Pre-processor Definitions ****************************************************************************/ /* Common commands * * CMD: BOARDIOC_INIT * DESCRIPTION: Perform one-time application initialization. * ARG: The boardctl() argument is passed to the * board_app_initialize() implementation without modification. * The argument has no meaning to NuttX; the meaning of the * argument is a contract between the board-specific * initalization logic and the matching application logic. * The value cold be such things as a mode enumeration value, * a set of DIP switch switch settings, a pointer to * configuration data read from a file or serial FLASH, or * whatever you would like to do with it. Every * implementation should accept zero/NULL as a default * configuration. * CONFIGURATION: CONFIG_LIB_BOARDCTL * DEPENDENCIES: Board logic must provide board_app_initialize() * * CMD: BOARDIOC_POWEROFF * DESCRIPTION: Power off the board * ARG: Integer value providing power off status information * CONFIGURATION: CONFIG_BOARDCTL_POWEROFF * DEPENDENCIES: Board logic must provide the board_power_off() interface. * * CMD: BOARDIOC_RESET * DESCRIPTION: Reset the board * ARG: Integer value providing power off status information * CONFIGURATION: CONFIG_BOARDCTL_RESET * DEPENDENCIES: Board logic must provide the board_reset() interface. * * CMD: BOARDIOC_UNIQUEID * DESCRIPTION: Return a unique ID associated with the board (such as a * serial number or a MAC address). * ARG: A writable array of size CONFIG_BOARDCTL_UNIQUEID_SIZE in * which to receive the board unique ID. * DEPENDENCIES: Board logic must provide the board_uniqueid() interface. * * CMD: BOARDIOC_APP_SYMTAB * DESCRIPTION: Select the application symbol table. This symbol table * provides the symbol definitions exported to application * code from application space. * ARG: A pointer to an instance of struct boardioc_symtab_s * CONFIGURATION: CONFIG_BOARDCTL_APP_SYMTAB * DEPENDENCIES: None * * CMD: BOARDIOC_OS_SYMTAB * DESCRIPTION: Select the OS symbol table. This symbol table provides * the symbol definitions exported by the OS to kernel * modules. * ARG: A pointer to an instance of struct boardioc_symtab_s * CONFIGURATION: CONFIG_BOARDCTL_OS_SYMTAB * DEPENDENCIES: None * * CMD: BOARDIOC_USBDEV_CONTROL * DESCRIPTION: Manage USB device classes * ARG: A pointer to an instance of struct boardioc_usbdev_ctrl_s * CONFIGURATION: CONFIG_LIB_BOARDCTL && CONFIG_BOARDCTL_USBDEVCTRL * DEPENDENCIES: Board logic must provide board__initialize() * * CMD: BOARDIOC_NX_START * DESCRIPTION: Start the NX servier * ARG: None * CONFIGURATION: CONFIG_NX_MULTIUSER * DEPENDENCIES: Base graphics logic provides nx_start() * * CMD: BOARDIOC_TSCTEST_SETUP * DESCRIPTION: Touchscreen controller test configuration * ARG: Touch controller device minor number * CONFIGURATION: CONFIG_LIB_BOARDCTL && CONFIG_BOARDCTL_TSCTEST * DEPENDENCIES: Board logic must provide board_tsc_setup() * * CMD: BOARDIOC_TSCTEST_TEARDOWN * DESCRIPTION: Touchscreen controller test configuration * ARG: None * CONFIGURATION: CONFIG_LIB_BOARDCTL && CONFIG_BOARDCTL_TSCTEST * DEPENDENCIES: Board logic must provide board_tsc_teardown() * * CMD: BOARDIOC_GRAPHICS_SETUP * DESCRIPTION: Configure graphics that require special initialization * procedures * ARG: A pointer to an instance of struct boardioc_graphics_s * CONFIGURATION: CONFIG_LIB_BOARDCTL && CONFIG_BOARDCTL_GRAPHICS * DEPENDENCIES: Board logic must provide board_graphics_setup() */ #define BOARDIOC_INIT _BOARDIOC(0x0001) #define BOARDIOC_POWEROFF _BOARDIOC(0x0002) #define BOARDIOC_RESET _BOARDIOC(0x0003) #define BOARDIOC_UNIQUEID _BOARDIOC(0x0004) #define BOARDIOC_APP_SYMTAB _BOARDIOC(0x0005) #define BOARDIOC_OS_SYMTAB _BOARDIOC(0x0006) #define BOARDIOC_USBDEV_CONTROL _BOARDIOC(0x0007) #define BOARDIOC_NX_START _BOARDIOC(0x0008) #define BOARDIOC_TSCTEST_SETUP _BOARDIOC(0x0009) #define BOARDIOC_TSCTEST_TEARDOWN _BOARDIOC(0x000a) #define BOARDIOC_GRAPHICS_SETUP _BOARDIOC(0x000b) /* If CONFIG_BOARDCTL_IOCTL=y, then boad-specific commands will be support. * In this case, all commands not recognized by boardctl() will be forwarded * to the board-provided board_ioctl() function. * * User defined board commands may begin with this value: */ #define BOARDIOC_USER _BOARDIOC(0x000d) /**************************************************************************** * Public Type Definitions ****************************************************************************/ /* Structure used to pass arguments and get returned values from the * BOARDIOC_GRAPHICS_SETUP command. */ #ifdef CONFIG_NX_LCDDRIVER struct lcd_dev_s; /* Forward reference */ #else struct fb_vtable_s; /* Forward reference */ #endif struct boardioc_graphics_s { int devno; /* IN: Graphics device number */ #ifdef CONFIG_NX_LCDDRIVER FAR struct lcd_dev_s *dev; /* OUT: LCD driver instance */ #else FAR struct fb_vtable_s *dev; /* OUT: Framebuffer driver instance */ #endif }; /* In order to full describe a symbol table, a vector containing the address * of the symbol table and the number of elements in the symbol table is * required. */ struct symtab_s; /* Forward reference */ struct boardioc_symtab_s { FAR struct symtab_s *symtab; int nsymbols; }; #ifdef CONFIG_BOARDCTL_USBDEVCTRL /* This structure provides the argument BOARDIOC_USBDEV_CONTROL and * describes which device should be controlled and what should be * done. * * enum boardioc_usbdev_identifier_e: Identifies the USB device class. * In the case of multiple instances of the USB device class, the * specific instance is identifed by the 'inst' field of the structure. * * enum boardioc_usbdev_action_e: Identifies the action to peform on * the USB device class instance. * * struct boardioc_usbdev_ctrl_s: * - usbdev: A value from enum boardioc_usbdev_identifier_e that * identifies the USB device class. * - action: The action to be performed on the USB device class. * - instance: If there are multiple instances of the USB device * class, this identifies the particular instance. This is normally * zero but could be non-zero if there are multiple USB device ports * supported by the board. For CDC/ACM, this is the /dev/ttyACM minor * number; For other devices this would be a port number. * - handle: This value is returned by the BOARDIOC_USBDEV_CONNECT * action and must be provided to the BOARDIOC_USBDEV_DISCONNECT * action. It is not used with the BOARDIOC_USBDEV_INITIALIZE action. */ enum boardioc_usbdev_identifier_e { BOARDIOC_USBDEV_NONE = 0 /* Not valid */ #ifdef CONFIG_CDCACM , BOARDIOC_USBDEV_CDCACM /* CDC/ACM */ #endif #ifdef CONFIG_PL2303 , BOARDIOC_USBDEV_PL2303 /* PL2303 serial */ #endif #ifdef CONFIG_USBMSC , BOARDIOC_USBDEV_MSC /* Mass storage class */ #endif #ifdef CONFIG_USBDEV_COMPOSITE , BOARDIOC_USBDEV_COMPOSITE /* Composite device */ #endif }; enum boardioc_usbdev_action_e { BOARDIOC_USBDEV_INITIALIZE = 0, /* Initialize USB device */ BOARDIOC_USBDEV_CONNECT, /* Connect the USB device */ BOARDIOC_USBDEV_DISCONNECT, /* Disconnect the USB device */ }; struct boardioc_usbdev_ctrl_s { uint8_t usbdev; /* See enum boardioc_usbdev_identifier_e */ uint8_t action; /* See enum boardioc_usbdev_action_e */ uint8_t instance; /* Identifies the USB device class instance */ FAR void **handle; /* Connection handle */ }; #endif /* CONFIG_BOARDCTL_USBDEVCTRL */ /**************************************************************************** * Public Data ****************************************************************************/ #undef EXTERN #if defined(__cplusplus) #define EXTERN extern "C" extern "C" { #else #define EXTERN extern #endif /**************************************************************************** * Public Function Prototypes ****************************************************************************/ /**************************************************************************** * Name: boardctl * * Description: * In a small embedded system, there will typically be a much greater * interaction between application and low-level board features. The * canonically correct to implement such interactions is by implementing a * character driver and performing the interactions via low level ioctl * calls. This, however, may not be practical in many cases and will lead * to "correct" but awkward implementations. * * boardctl() is non-standard OS interface to alleviate the problem. It * basically circumvents the normal device driver ioctl interlace and allows * the application to perform direct IOCTL-like calls to the board-specific * logic. It is especially useful for setting up board operational and * test configurations. * * Input Parameters: * cmd - Identifies the board command to be executed * arg - The argument that accompanies the command. The nature of the * argument is determined by the specific command. * * Returned Value: * On success zero (OK) is returned; -1 (ERROR) is returned on failure * with the errno variable to to indicate the nature of the failure. * ****************************************************************************/ int boardctl(unsigned int cmd, uintptr_t arg); #undef EXTERN #if defined(__cplusplus) } #endif #endif /* CONFIG_LIB_BOARDCTL */ #endif /* __INCLUDE_SYS_BOARDCTL_H */