/**************************************************************************** * net/nat/ipv6_nat.c * * Licensed to the Apache Software Foundation (ASF) under one or more * contributor license agreements. See the NOTICE file distributed with * this work for additional information regarding copyright ownership. The * ASF licenses this file to you under the Apache License, Version 2.0 (the * "License"); you may not use this file except in compliance with the * License. You may obtain a copy of the License at * * http://www.apache.org/licenses/LICENSE-2.0 * * Unless required by applicable law or agreed to in writing, software * distributed under the License is distributed on an "AS IS" BASIS, WITHOUT * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the * License for the specific language governing permissions and limitations * under the License. * ****************************************************************************/ /**************************************************************************** * Included Files ****************************************************************************/ #include #include #include #include #include #include #include #include #include "nat/nat.h" #include "utils/utils.h" #ifdef CONFIG_NET_NAT66 /**************************************************************************** * Private Function Prototypes ****************************************************************************/ static FAR ipv6_nat_entry_t * ipv6_nat_inbound_internal(FAR struct ipv6_hdr_s *ipv6, enum nat_manip_type_e manip_type); static FAR ipv6_nat_entry_t * ipv6_nat_outbound_internal(FAR struct net_driver_s *dev, FAR struct ipv6_hdr_s *ipv6, enum nat_manip_type_e manip_type); /**************************************************************************** * Private Functions ****************************************************************************/ /**************************************************************************** * Name: ipv6_nat_ip_adjust * * Description: * Adjust address and checksum for network packet. * * Input Parameters: * l4chksum - Points to the L4 checksum to adjust, NULL for not adjust. * old_ip - The IP to be set. * new_ip - The IP to set into header. * ****************************************************************************/ static void ipv6_nat_ip_adjust(FAR uint16_t *l4chksum, FAR uint16_t *old_ip, net_ipv6addr_t new_ip) { /* TODO: Maybe we can accelerate the checksum adjustment by pre-calculate a * difference of checksum, and apply it to each packet, instead of calling * chksum_adjust each time. */ if (l4chksum != NULL) { nat_chksum_adjust(l4chksum, old_ip, new_ip, sizeof(net_ipv6addr_t)); } net_ipv6addr_hdrcopy(old_ip, new_ip); } /**************************************************************************** * Name: ipv6_nat_port_adjust * * Description: * Adjust port and checksum for network packet. * * Input Parameters: * l4chksum - Points to the L4 checksum to adjust, NULL for not adjust. * old_port - The port to be set. * new_port - The port to set into header. * ****************************************************************************/ static void ipv6_nat_port_adjust(FAR uint16_t *l4chksum, FAR uint16_t *old_port, uint16_t new_port) { if (l4chksum != NULL) { nat_chksum_adjust(l4chksum, old_port, &new_port, sizeof(new_port)); } *old_port = new_port; } /**************************************************************************** * Name: ipv6_nat_inbound_tcp * * Description: * Check if a received TCP packet belongs to a NAT entry. If so, translate * the external IP/Port to local IP/Port. * * Input Parameters: * ipv6 - Points to the IPv6 header to translate. * tcp - Points to the TCP header to translate. * manip_type - Whether external IP/Port is in source or destination. * * Returned Value: * The corresponding NAT entry of the packet. * * Assumptions: * Packet is received on NAT device and is targeting at the address * assigned to the device. * ****************************************************************************/ #ifdef CONFIG_NET_TCP static FAR ipv6_nat_entry_t * ipv6_nat_inbound_tcp(FAR struct ipv6_hdr_s *ipv6, FAR struct tcp_hdr_s *tcp, enum nat_manip_type_e manip_type) { FAR uint16_t *external_ip = MANIP_IPADDR(ipv6, manip_type); FAR uint16_t *external_port = MANIP_PORT(tcp, manip_type); FAR uint16_t *peer_ip = PEER_IPADDR(ipv6, manip_type); FAR uint16_t *peer_port = PEER_PORT(tcp, manip_type); FAR ipv6_nat_entry_t *entry = ipv6_nat_inbound_entry_find(IP_PROTO_TCP, external_ip, *external_port, peer_ip, *peer_port, true); if (!entry) { return NULL; } /* Note: Field tcpchksum is not guaranteed exists in TCP header inside * ICMPv6 Error MSG, but we manually guarantee that it is inside valid * address (IOB >= IP + ICMPv6 + IP + TCP), so we can update it safely. */ ipv6_nat_port_adjust(&tcp->tcpchksum, external_port, entry->local_port); ipv6_nat_ip_adjust(&tcp->tcpchksum, external_ip, entry->local_ip); return entry; } #endif /**************************************************************************** * Name: ipv6_nat_inbound_udp * * Description: * Check if a received UDP packet belongs to a NAT entry. If so, translate * the external IP/Port to local IP/Port. * * Input Parameters: * ipv6 - Points to the IPv6 header to translate. * udp - Points to the UDP header to translate. * manip_type - Whether external IP/Port is in source or destination. * * Returned Value: * The corresponding NAT entry of the packet. * * Assumptions: * Packet is received on NAT device and is targeting at the address * assigned to the device. * ****************************************************************************/ #ifdef CONFIG_NET_UDP static FAR ipv6_nat_entry_t * ipv6_nat_inbound_udp(FAR struct ipv6_hdr_s *ipv6, FAR struct udp_hdr_s *udp, enum nat_manip_type_e manip_type) { FAR uint16_t *external_ip = MANIP_IPADDR(ipv6, manip_type); FAR uint16_t *external_port = MANIP_PORT(udp, manip_type); FAR uint16_t *peer_ip = PEER_IPADDR(ipv6, manip_type); FAR uint16_t *peer_port = PEER_PORT(udp, manip_type); FAR uint16_t *udpchksum; FAR ipv6_nat_entry_t *entry = ipv6_nat_inbound_entry_find(IP_PROTO_UDP, external_ip, *external_port, peer_ip, *peer_port, true); if (!entry) { return NULL; } /* UDP checksum has special case 0 (no checksum) */ udpchksum = udp->udpchksum != 0 ? &udp->udpchksum : NULL; ipv6_nat_port_adjust(udpchksum, external_port, entry->local_port); ipv6_nat_ip_adjust(udpchksum, external_ip, entry->local_ip); return entry; } #endif /**************************************************************************** * Name: ipv6_nat_inbound_icmpv6 * * Description: * Check if a received ICMPv6 packet belongs to a NAT entry. If so, * translate the external IP/ID to local IP/ID. * * Input Parameters: * ipv6 - Points to the IPv6 header to translate. * icmpv6 - Points to the ICMPv6 header to translate. * manip_type - Whether external IP is in source or destination. * * Returned Value: * The corresponding NAT entry of the packet. * * Assumptions: * Packet is received on g_dev and is targeting at the address assigned to * g_dev. * ****************************************************************************/ #ifdef CONFIG_NET_ICMPv6 static FAR ipv6_nat_entry_t * ipv6_nat_inbound_icmpv6(FAR struct ipv6_hdr_s *ipv6, FAR struct icmpv6_hdr_s *icmpv6, enum nat_manip_type_e manip_type) { FAR uint16_t *external_ip = MANIP_IPADDR(ipv6, manip_type); FAR uint16_t *peer_ip = PEER_IPADDR(ipv6, manip_type); FAR ipv6_nat_entry_t *entry; switch (icmpv6->type) { case ICMPv6_ECHO_REQUEST: case ICMPv6_ECHO_REPLY: entry = ipv6_nat_inbound_entry_find(IP_PROTO_ICMP6, external_ip, icmpv6->data[0], peer_ip, icmpv6->data[0], true); if (!entry) { return NULL; } ipv6_nat_port_adjust(&icmpv6->chksum, &icmpv6->data[0], entry->local_port); ipv6_nat_ip_adjust(&icmpv6->chksum, external_ip, entry->local_ip); return entry; case ICMPv6_DEST_UNREACHABLE: case ICMPv6_PACKET_TOO_BIG: case ICMPv6_PACKET_TIME_EXCEEDED: case ICMPv6_PACKET_PARAM_PROBLEM: /* ICMPv6 Error MSG inside another ICMPv6 Error MSG is forbidden by * RFC4443, Section 2.4, Page 6, so we only process the outermost * ICMPv6 Error MSG (manip type is DST). */ if (manip_type == NAT_MANIP_DST) { /* The payload in the ICMPv6 packet is the origin packet we sent. * We don't need to check or backup any inner L4 data, because * every ICMPv6 error message (type < 128) MUST include as much * of the IPv6 offending (invoking) packet as possible. And the * inner packet will be translated by the inbound process * without needed to modify any outer packet checksum. */ FAR struct ipv6_hdr_s *inner = (FAR struct ipv6_hdr_s *)(icmpv6 + 1); /* Find entry and translate inner. */ entry = ipv6_nat_inbound_internal(inner, NAT_MANIP_SRC); if (!entry) { return NULL; } /* Adjust outer IP */ ipv6_nat_ip_adjust(&icmpv6->chksum, external_ip, entry->local_ip); return entry; } } return NULL; } #endif /**************************************************************************** * Name: ipv6_nat_outbound_tcp * * Description: * Check if we want to perform NAT with this outbound TCP packet before * sending it. If so, translate the local IP/Port to external IP/Port. * * Input Parameters: * dev - The device to sent the packet (to get external IP). * ipv6 - Points to the IPv6 header to translate. * tcp - Points to the TCP header to translate. * manip_type - Whether local IP/Port is in source or destination. * * Returned Value: * The corresponding NAT entry of the packet. * * Assumptions: * Packet will be sent on NAT device. * ****************************************************************************/ #ifdef CONFIG_NET_TCP static FAR ipv6_nat_entry_t * ipv6_nat_outbound_tcp(FAR struct net_driver_s *dev, FAR struct ipv6_hdr_s *ipv6, FAR struct tcp_hdr_s *tcp, enum nat_manip_type_e manip_type) { FAR uint16_t *local_ip = MANIP_IPADDR(ipv6, manip_type); FAR uint16_t *local_port = MANIP_PORT(tcp, manip_type); FAR uint16_t *peer_ip = PEER_IPADDR(ipv6, manip_type); FAR uint16_t *peer_port = PEER_PORT(tcp, manip_type); FAR ipv6_nat_entry_t *entry; /* Only create entry when it's the outermost packet (manip type is SRC). */ entry = ipv6_nat_outbound_entry_find(dev, IP_PROTO_TCP, local_ip, *local_port, peer_ip, *peer_port, manip_type == NAT_MANIP_SRC); if (!entry) { return NULL; } /* Note: Field tcpchksum is not guaranteed exists in TCP header inside * ICMPv6 Error MSG, but we manually guarantee that it is inside valid * address (IOB >= IP + ICMPv6 + IP + TCP), so we can update it safely. */ ipv6_nat_port_adjust(&tcp->tcpchksum, local_port, entry->external_port); ipv6_nat_ip_adjust(&tcp->tcpchksum, local_ip, entry->external_ip); return entry; } #endif /**************************************************************************** * Name: ipv6_nat_outbound_udp * * Description: * Check if we want to perform NAT with this outbound UDP packet before * sending it. If so, translate the local IP/Port to external IP/Port. * * Input Parameters: * dev - The device to sent the packet (to get external IP). * ipv6 - Points to the IPv6 header to translate. * udp - Points to the UDP header to translate. * manip_type - Whether local IP/Port is in source or destination. * * Returned Value: * The corresponding NAT entry of the packet. * * Assumptions: * Packet will be sent on NAT device. * ****************************************************************************/ #ifdef CONFIG_NET_UDP static FAR ipv6_nat_entry_t * ipv6_nat_outbound_udp(FAR struct net_driver_s *dev, FAR struct ipv6_hdr_s *ipv6, FAR struct udp_hdr_s *udp, enum nat_manip_type_e manip_type) { FAR uint16_t *local_ip = MANIP_IPADDR(ipv6, manip_type); FAR uint16_t *local_port = MANIP_PORT(udp, manip_type); FAR uint16_t *peer_ip = PEER_IPADDR(ipv6, manip_type); FAR uint16_t *peer_port = PEER_PORT(udp, manip_type); FAR uint16_t *udpchksum; FAR ipv6_nat_entry_t *entry; /* Only create entry when it's the outermost packet (manip type is SRC). */ entry = ipv6_nat_outbound_entry_find(dev, IP_PROTO_UDP, local_ip, *local_port, peer_ip, *peer_port, manip_type == NAT_MANIP_SRC); if (!entry) { return NULL; } /* UDP checksum has special case 0 (no checksum) */ udpchksum = udp->udpchksum != 0 ? &udp->udpchksum : NULL; ipv6_nat_port_adjust(udpchksum, local_port, entry->external_port); ipv6_nat_ip_adjust(udpchksum, local_ip, entry->external_ip); return entry; } #endif /**************************************************************************** * Name: ipv6_nat_outbound_icmpv6 * * Description: * Check if we want to perform NAT with this outbound ICMPv6 packet before * sending it. If so, translate the local IP/ID to external IP/ID. * * Input Parameters: * dev - The device to sent the packet (to get external IP). * ipv6 - Points to the IPv6 header to translate. * icmpv6 - Points to the ICMPv6 header to translate. * manip_type - Whether local IP is in source or destination. * * Returned Value: * The corresponding NAT entry of the packet. * * Assumptions: * Packet will be sent on NAT device. * ****************************************************************************/ #ifdef CONFIG_NET_ICMPv6 static FAR ipv6_nat_entry_t * ipv6_nat_outbound_icmpv6(FAR struct net_driver_s *dev, FAR struct ipv6_hdr_s *ipv6, FAR struct icmpv6_hdr_s *icmpv6, enum nat_manip_type_e manip_type) { FAR uint16_t *local_ip = MANIP_IPADDR(ipv6, manip_type); FAR uint16_t *peer_ip = PEER_IPADDR(ipv6, manip_type); FAR ipv6_nat_entry_t *entry; switch (icmpv6->type) { case ICMPv6_ECHO_REQUEST: case ICMPv6_ECHO_REPLY: /* Note: Only create new entry when it's the outermost packet (that * is, manip type is SRC). */ entry = ipv6_nat_outbound_entry_find(dev, IP_PROTO_ICMP6, local_ip, icmpv6->data[0], peer_ip, icmpv6->data[0], manip_type == NAT_MANIP_SRC); if (!entry) { return NULL; } ipv6_nat_port_adjust(&icmpv6->chksum, &icmpv6->data[0], entry->external_port); ipv6_nat_ip_adjust(&icmpv6->chksum, local_ip, entry->external_ip); return entry; case ICMPv6_DEST_UNREACHABLE: case ICMPv6_PACKET_TOO_BIG: case ICMPv6_PACKET_TIME_EXCEEDED: case ICMPv6_PACKET_PARAM_PROBLEM: /* ICMPv6 Error MSG inside another ICMPv6 Error MSG is forbidden by * RFC4443, Section 2.4, Page 6, so we only process the outermost * ICMPv6 Error MSG (manip type is DST). */ if (manip_type == NAT_MANIP_SRC) { /* The payload in the ICMPv6 packet is the origin packet we got. * We don't need to check or backup any inner L4 data, because * every ICMPv6 error message (type < 128) MUST include as much * of the IPv6 offending (invoking) packet as possible. And the * inner packet will be translated by the inbound process * without needed to modify any outer packet checksum. */ FAR struct ipv6_hdr_s *inner = (FAR struct ipv6_hdr_s *)(icmpv6 + 1); /* Find entry and translate inner. */ entry = ipv6_nat_outbound_internal(dev, inner, NAT_MANIP_DST); if (!entry) { return NULL; } /* Adjust outer IP */ ipv6_nat_ip_adjust(&icmpv6->chksum, local_ip, entry->external_ip); return entry; } } return NULL; } #endif /**************************************************************************** * Name: ipv6_nat_inbound_internal * * Description: * Check if a received packet belongs to a NAT entry. If so, translate * the external IP/Port to local IP/Port. * * Input Parameters: * ipv6 - Points to the IPv6 header to translate. * manip_type - Whether external IP/Port is in source or destination. * * Returned Value: * The corresponding NAT entry of the packet. * * Assumptions: * Packet is received on NAT device and is targeting at the address * assigned to the device. * ****************************************************************************/ static FAR ipv6_nat_entry_t * ipv6_nat_inbound_internal(FAR struct ipv6_hdr_s *ipv6, enum nat_manip_type_e manip_type) { uint8_t proto; FAR void *l4hdr = net_ipv6_payload(ipv6, &proto); switch (ipv6->proto) { #ifdef CONFIG_NET_TCP case IP_PROTO_TCP: return ipv6_nat_inbound_tcp(ipv6, l4hdr, manip_type); #endif #ifdef CONFIG_NET_UDP case IP_PROTO_UDP: return ipv6_nat_inbound_udp(ipv6, l4hdr, manip_type); #endif #ifdef CONFIG_NET_ICMPv6 case IP_PROTO_ICMP6: return ipv6_nat_inbound_icmpv6(ipv6, l4hdr, manip_type); #endif } return NULL; } /**************************************************************************** * Name: ipv6_nat_outbound_internal * * Description: * Check if we want to perform NAT with this outbound packet before * sending it. If so, translate the local IP/Port to external IP/Port. * * Input Parameters: * dev - The device to sent the packet (to get external IP). * ipv6 - Points to the IPv6 header to translate. * manip_type - Whether local IP/Port is in source or destination. * * Returned Value: * The corresponding NAT entry of the packet. * * Assumptions: * Packet will be sent on NAT device. * ****************************************************************************/ static FAR ipv6_nat_entry_t * ipv6_nat_outbound_internal(FAR struct net_driver_s *dev, FAR struct ipv6_hdr_s *ipv6, enum nat_manip_type_e manip_type) { uint8_t proto; FAR void *l4hdr = net_ipv6_payload(ipv6, &proto); switch (proto) { #ifdef CONFIG_NET_TCP case IP_PROTO_TCP: return ipv6_nat_outbound_tcp(dev, ipv6, l4hdr, manip_type); #endif #ifdef CONFIG_NET_UDP case IP_PROTO_UDP: return ipv6_nat_outbound_udp(dev, ipv6, l4hdr, manip_type); #endif #ifdef CONFIG_NET_ICMPv6 case IP_PROTO_ICMP6: return ipv6_nat_outbound_icmpv6(dev, ipv6, l4hdr, manip_type); #endif } return NULL; } /**************************************************************************** * Public Functions ****************************************************************************/ /**************************************************************************** * Name: ipv6_nat_inbound * * Description: * Check if a received packet belongs to a NAT entry. If so, translate it. * * Input Parameters: * dev - The device on which the packet is received. * ipv6 - Points to the IPv6 header with dev->d_buf. * ****************************************************************************/ void ipv6_nat_inbound(FAR struct net_driver_s *dev, FAR struct ipv6_hdr_s *ipv6) { /* We only process packets from NAT device and targeting at the address * assigned to the device. */ if (IFF_IS_NAT(dev->d_flags) && NETDEV_IS_MY_V6ADDR(dev, ipv6->destipaddr)) { ipv6_nat_inbound_internal(ipv6, NAT_MANIP_DST); } } /**************************************************************************** * Name: ipv6_nat_outbound * * Description: * Check if we want to perform NAT with this outbound packet before sending * it. If so, translate it. * * Input Parameters: * dev - The device on which the packet will be sent. * ipv6 - Points to the IPv6 header to be filled into dev->d_buf later. * manip_type - Whether local IP/Port is in source or destination. * * Returned Value: * Zero is returned if NAT is successfully applied, or is not enabled for * this packet; * A negated errno value is returned if error occured. * ****************************************************************************/ int ipv6_nat_outbound(FAR struct net_driver_s *dev, FAR struct ipv6_hdr_s *ipv6, enum nat_manip_type_e manip_type) { /* We only process packets targeting at NAT device but not targeting at the * address assigned to the device. */ if (IFF_IS_NAT(dev->d_flags) && !NETDEV_IS_MY_V6ADDR(dev, ipv6->srcipaddr) && !NETDEV_IS_MY_V6ADDR(dev, ipv6->destipaddr)) { FAR ipv6_nat_entry_t *entry = ipv6_nat_outbound_internal(dev, ipv6, manip_type); if (manip_type == NAT_MANIP_SRC && !entry) { /* Outbound entry creation failed, should have entry. */ return -ENOENT; } } return OK; } #endif /* CONFIG_NET_NAT66 */