/**************************************************************************** * drivers/wireless/cc3000_socket.h - CC3000 Host Driver Implementation. * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/ * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * * Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * * Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the * distribution. * * Neither the name of Texas Instruments Incorporated nor the names of * its contributors may be used to endorse or promote products derived * from this software without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. * ****************************************************************************/ #ifndef __DRIVERS_WIRELESS_CC3000_SOCKET_H #define __DRIVERS_WIRELESS_CC3000_SOCKET_H /**************************************************************************** * Included Files ****************************************************************************/ #include #include #include /**************************************************************************** * Pre-processor Definitions ****************************************************************************/ #define CC3000_HOSTNAME_MAX_LENGTH (230) /* 230 bytes + header shouldn't exceed 8 * bit value */ /*--------- Address Families --------*/ #define CC3000_AF_INET 2 #define CC3000_AF_INET6 23 /*------------ Socket Types ------------*/ #define CC3000_SOCK_STREAM 1 #define CC3000_SOCK_DGRAM 2 #define CC3000_SOCK_RAW 3 /* Raw sockets allow new IPv4 * protocols to be implemented in * user space. A raw socket receives * or sends the raw datagram not * including link level headers */ #define CC3000_SOCK_RDM 4 #define CC3000_SOCK_SEQPACKET 5 /*----------- Socket Protocol ----------*/ #define CC3000_IPPROTO_IP 0 /* Dummy for IP */ #define CC3000_IPPROTO_ICMP 1 /* Control message protocol */ #define CC3000_IPPROTO_IPV4 CC3000_IPPROTO_IP /* IP inside IP */ #define CC3000_IPPROTO_TCP 6 /* TCP */ #define CC3000_IPPROTO_UDP 17 /* User datagram protocol */ #define CC3000_IPPROTO_IPV6 41 /* IPv6 in IPv6 */ #define CC3000_IPPROTO_NONE 59 /* No next header */ #define CC3000_IPPROTO_TX_TEST_RAW 150 /* Raw 802.11 Tx Test packet */ #define CC3000_IPPROTO_RAW 255 /* Raw IP packet */ #define CC3000_IPPROTO_MAX 256 /*----------- Socket retunr codes -----------*/ #define CC3000_SOC_ERROR (-1) /* Error */ #define CC3000_SOC_IN_PROGRESS (-2) /* Socket in progress */ /*----------- Socket Options -----------*/ #define CC3000_SOL_SOCKET 0xffff /* Socket level */ #define CC3000_SOCKOPT_RECV_NONBLOCK 0 /* recv non block mode, set SOCK_ON or * SOCK_OFF (default block mode) */ #define CC3000_SOCKOPT_RECV_TIMEOUT 1 /* optname to configure recv and recvfromtimeout */ #define CC3000_SOCKOPT_ACCEPT_NONBLOCK 2 /* accept non block mode, set SOCK_ON or SOCK_OFF * (default block mode) */ #define CC3000_SOCK_ON 0 /* socket non-blocking mode is enabled */ #define CC3000_SOCK_OFF 1 /* socket blocking mode is enabled */ #define CC3000_TCP_NODELAY 0x0001 #define CC3000_TCP_BSDURGENT 0x7000 #define CC3000_MAX_PACKET_SIZE 1500 #define CC3000_MAX_LISTEN_QUEUE 4 #define CC3000_IOCTL_SOCKET_EVENTMASK #define CC3000_FD_SETSIZE 32 #define CC3000_ASIC_ADDR_LEN 8 #define CC3000_NO_QUERY_RECIVED -3 /* It's easier to assume 8-bit bytes than to get CHAR_BIT. */ #define __NFDBITS (8 * sizeof (__fd_mask)) #define __FDELT(d) ((d) / __NFDBITS) #define __FDMASK(d) ((__fd_mask) 1 << ((d) % __NFDBITS)) #define __FDS_BITS(set) ((set)->fds_bits) /* We don't use `memset' because this would require a prototype and * the array isn't too big. */ #define __FD_ZERO(set) \ do { \ unsigned int __i; \ TICC3000fd_set *__arr = (set); \ for (__i = 0; __i < sizeof (TICC3000fd_set) / sizeof (__fd_mask); ++__i) \ __FDS_BITS (__arr)[__i] = 0; \ } while (0) #define __FD_SET(d, set) (__FDS_BITS (set)[__FDELT (d)] |= __FDMASK (d)) #define __FD_CLR(d, set) (__FDS_BITS (set)[__FDELT (d)] &= ~__FDMASK (d)) #define __FD_ISSET(d, set) (__FDS_BITS (set)[__FDELT (d)] & __FDMASK (d)) /* Access macros for 'TICC3000fd_set' */ #define CC3000_FD_SET(fd, fdsetp) __FD_SET (fd, fdsetp) #define CC3000_FD_CLR(fd, fdsetp) __FD_CLR (fd, fdsetp) #define CC3000_FD_ISSET(fd, fdsetp) __FD_ISSET (fd, fdsetp) #define CC3000_FD_ZERO(fdsetp) __FD_ZERO (fdsetp) /* mDNS port - 5353 mDNS multicast address - 224.0.0.251 */ #define SET_mDNS_ADD(sockaddr) sockaddr.sa_data[0] = 0x14; \ sockaddr.sa_data[1] = 0xe9; \ sockaddr.sa_data[2] = 0xe0; \ sockaddr.sa_data[3] = 0x0; \ sockaddr.sa_data[4] = 0x0; \ sockaddr.sa_data[5] = 0xfb; /**************************************************************************** * Public Types ****************************************************************************/ /* The fd_set member is required to be an array of longs. */ typedef long int __fd_mask; /* fd_set for select and pselect. */ typedef struct { __fd_mask fds_bits[CC3000_FD_SETSIZE / __NFDBITS]; } TICC3000fd_set; /**************************************************************************** * Public Data ****************************************************************************/ #ifdef __cplusplus extern "C" { #endif /**************************************************************************** * Public Function Prototypes ****************************************************************************/ /**************************************************************************** * Name: cc3000_socket_impl * * Decription: * create an endpoint for communication. The socket function creates a * socket that is bound to a specific transport service provider. This * function is called by the application layer to obtain a socket handle. * * Input Parameters: * domain selects the protocol family which will be used for * communication. On this version only AF_INET is supported * type specifies the communication semantics. On this version * only SOCK_STREAM, SOCK_DGRAM, SOCK_RAW are supported * protocol specifies a particular protocol to be used with the * socket IPPROTO_TCP, IPPROTO_UDP or IPPROTO_RAW are * supported. * * Returned Value: * On success, socket handle that is used for consequent socket * operations. On error, -1 is returned. * ****************************************************************************/ int cc3000_socket_impl(long domain, long type, long protocol); /**************************************************************************** * Name: cc3000_closesocket_impl * * Decription: * The socket function closes a created socket. * * Input Parameters: * sd socket handle. * * Returned Value: * On success, zero is returned. On error, -1 is returned. * ****************************************************************************/ long cc3000_closesocket_impl(long sd); /**************************************************************************** * Name: cc3000_accept_impl * * Decription: * accept a connection on a socket: * This function is used with connection-based socket types * (SOCK_STREAM). It extracts the first connection request on the * queue of pending connections, creates a new connected socket, and * returns a new file descriptor referring to that socket. * The newly created socket is not in the listening state. * The original socket sd is unaffected by this call. * The argument sd is a socket that has been created with socket(), * bound to a local address with bind(), and is listening for * connections after a listen(). The argument addr is a pointer * to a sockaddr structure. This structure is filled in with the * address of the peer socket, as known to the communications layer. * The exact format of the address returned addr is determined by the * socket's address family. The addrlen argument is a value-result * argument: it should initially contain the size of the structure * pointed to by addr, on return it will contain the actual * length (in bytes) of the address returned. * * Input Parameters: * sd socket descriptor (handle) * addr the argument addr is a pointer to a sockaddr structure * This structure is filled in with the address of the * peer socket, as known to the communications layer. * determined. The exact format of the address returned * addr is by the socket's address sockaddr. * On this version only AF_INET is supported. * This argument returns in network order. * addrlen The addrlen argument is a value-result argument: * it should initially contain the size of the structure * pointed to by addr. * * Returned Value: * For socket in blocking mode: * On success, socket handle. on failure negative * For socket in non-blocking mode: * - On connection establishment, socket handle * - On connection pending, SOC_IN_PROGRESS (-2) * - On failure, SOC_ERROR (-1) * ****************************************************************************/ long cc3000_accept_impl(long sd, struct sockaddr *addr, socklen_t *addrlen); /**************************************************************************** * Name: cc3000_bind_impl * * Decription: * assign a name to a socket * This function gives the socket the local address addr. * addr is addrlen bytes long. Traditionally, this is called when a * socket is created with socket, it exists in a name space (address * family) but has no name assigned. * It is necessary to assign a local address before a SOCK_STREAM * socket may receive connections. * * Input Parameters: * sd socket descriptor (handle) * addr specifies the destination address. On this version * only AF_INET is supported. * addrlen contains the size of the structure pointed to by addr. * * Returned Value: * On success, zero is returned. On error, -1 is returned. * ****************************************************************************/ long cc3000_bind_impl(long sd, FAR const struct sockaddr *addr, socklen_t addrlen); /**************************************************************************** * Name: cc3000_listen_impl * * Decription: * listen for connections on a socket * The willingness to accept incoming connections and a queue * limit for incoming connections are specified with listen(), * and then the connections are accepted with accept. * The listen() call applies only to sockets of type SOCK_STREAM * The backlog parameter defines the maximum length the queue of * pending connections may grow to. * * NOTE: On this version, backlog is not supported * * Input Parameters: * sd socket descriptor (handle) * backlog specifies the listen queue depth. On this version * backlog is not supported. * * Returned Value: * On success, zero is returned. On error, -1 is returned. * ****************************************************************************/ long cc3000_listen_impl(long sd, long backlog); /**************************************************************************** * Name: cc3000_connect_impl * * Decription: * initiate a connection on a socket * Function connects the socket referred to by the socket descriptor * sd, to the address specified by addr. The addrlen argument * specifies the size of addr. The format of the address in addr is * determined by the address space of the socket. If it is of type * SOCK_DGRAM, this call specifies the peer with which the socket is * to be associated; this address is that to which datagrams are to be * sent, and the only address from which datagrams are to be received. * If the socket is of type SOCK_STREAM, this call attempts to make a * connection to another socket. The other socket is specified by * address, which is an address in the communications space of the * socket. Note that the function implements only blocking behavior * thus the caller will be waiting either for the connection * establishment or for the connection establishment failure. * * Input Parameters: * sd socket descriptor (handle) * addr specifies the destination addr. On this version * only AF_INET is supported. * addrlen contains the size of the structure pointed to by addr * * Returned Value: * On success, zero is returned. On error, -1 is returned * ****************************************************************************/ long cc3000_connect_impl(long sd, FAR const struct sockaddr *addr, socklen_t addrlen); /**************************************************************************** * Name: cc3000_select_impl * * Decription: * Monitor socket activity * Select allow a program to monitor multiple file descriptors, * waiting until one or more of the file descriptors become * "ready" for some class of I/O operation * * NOTE: If the timeout value set to less than 5ms it will automatically set * to 5ms to prevent overload of the system * * Input Parameters: * nfds the highest-numbered file descriptor in any of the * three sets, plus 1. * readfds socket descriptors list for read monitoring * writefds socket descriptors list for write monitoring * exceptfds socket descriptors list for exception monitoring * timeout is an upper bound on the amount of time elapsed * before select() returns. Null means infinity * timeout. The minimum timeout is 5 milliseconds, * less than 5 milliseconds will be set * automatically to 5 milliseconds. * * Returned Value: * On success, select() returns the number of file descriptors * contained in the three returned descriptor sets (that is, the * total number of bits that are set in readfds, writefds, * exceptfds) which may be zero if the timeout expires before * anything interesting happens. * On error, -1 is returned. * *readfds - return the sockets on which Read request will * return without delay with valid data. * *writefds - return the sockets on which Write request * will return without delay. * *exceptfds - return the sockets which closed recently. * ****************************************************************************/ struct timeval; int cc3000_select_impl(long nfds, TICC3000fd_set *readfds, TICC3000fd_set *writefds,TICC3000fd_set *exceptfds, struct timeval *timeout); int cc3000_select(int nfds, fd_set *readfds, fd_set *writefds,fd_set *exceptfds, struct timeval *timeout); #ifndef CC3000_TINY_DRIVER /**************************************************************************** * Name: cc3000_setsockopt_impl * * Decription: * set socket options * This function manipulate the options associated with a socket. * Options may exist at multiple protocol levels; they are always * present at the uppermost socket level. * When manipulating socket options the level at which the option * resides and the name of the option must be specified. * To manipulate options at the socket level, level is specified as * SOL_SOCKET. To manipulate options at any other level the protocol * number of the appropriate protocol controlling the option is * supplied. For example, to indicate that an option is to be * interpreted by the TCP protocol, level should be set to the * protocol number of TCP; * The parameters optval and optlen are used to access optval - * use for setsockopt(). For getsockopt() they identify a buffer * in which the value for the requested option(s) are to * be returned. For getsockopt(), optlen is a value-result * parameter, initially containing the size of the buffer * pointed to by option_value, and modified on return to * indicate the actual size of the value returned. If no option * value is to be supplied or returned, option_value may be NULL. * * NOTE: On this version the following two socket options are enabled: * The only protocol level supported in this version * is SOL_SOCKET (level). * 1. SOCKOPT_RECV_TIMEOUT (optname) * SOCKOPT_RECV_TIMEOUT configures recv and recvfrom timeout * in milliseconds. * In that case optval should be pointer to unsigned long. * 2. SOCKOPT_NONBLOCK (optname). sets the socket non-blocking mode on * or off. * In that case optval should be SOCK_ON or SOCK_OFF (optval). * * Input Parameters: * sd socket handle * level defines the protocol level for this option * optname defines the option name to Interrogate * optval specifies a value for the option * optlen specifies the length of the option value * * Returned Value: * On success, zero is returned. On error, -1 is returned * ****************************************************************************/ int cc3000_setsockopt_impl(long sd, long level, long optname, const void *optval, socklen_t optlen); #endif /**************************************************************************** * Name: cc3000_getsockopt_impl * * Decription: * set socket options * This function manipulate the options associated with a socket. * Options may exist at multiple protocol levels; they are always * present at the uppermost socket level. * When manipulating socket options the level at which the option * resides and the name of the option must be specified. * To manipulate options at the socket level, level is specified as * SOL_SOCKET. To manipulate options at any other level the protocol * number of the appropriate protocol controlling the option is * supplied. For example, to indicate that an option is to be * interpreted by the TCP protocol, level should be set to the * protocol number of TCP; * The parameters optval and optlen are used to access optval - * use for setsockopt(). For getsockopt() they identify a buffer * in which the value for the requested option(s) are to * be returned. For getsockopt(), optlen is a value-result * parameter, initially containing the size of the buffer * pointed to by option_value, and modified on return to * indicate the actual size of the value returned. If no option * value is to be supplied or returned, option_value may be NULL. * * NOTE: On this version the following two socket options are enabled: * The only protocol level supported in this version * is SOL_SOCKET (level). * 1. SOCKOPT_RECV_TIMEOUT (optname) * SOCKOPT_RECV_TIMEOUT configures recv and recvfrom timeout * in milliseconds. * In that case optval should be pointer to unsigned long. * 2. SOCKOPT_NONBLOCK (optname). sets the socket non-blocking mode on * or off. * In that case optval should be SOCK_ON or SOCK_OFF (optval). * * Input Parameters: * sd socket handle * level defines the protocol level for this option * optname defines the option name to Interrogate * optval specifies a value for the option * optlen specifies the length of the option value * * Returned Value: * On success, zero is returned. On error, -1 is returned * ****************************************************************************/ int cc3000_getsockopt_impl(long sd, long level, long optname, void *optval, socklen_t *optlen); /**************************************************************************** * Name: cc3000_recv_impl * * Decription: * function receives a message from a connection-mode socket * * NOTE: On this version, only blocking mode is supported. * * Input Parameters: * sd socket handle * buf Points to the buffer where the message should be stored * len Specifies the length in bytes of the buffer pointed to * by the buffer argument. * flags Specifies the type of message reception. * On this version, this parameter is not supported. * * Returned Value: * Return the number of bytes received, or -1 if an error * occurred * ****************************************************************************/ int cc3000_recv_impl(long sd, void *buf, long len, long flags); /**************************************************************************** * Name: cc3000_recvfrom_impl * * Decription: * read data from socket * function receives a message from a connection-mode or * connectionless-mode socket. Note that raw sockets are not * supported. * * NOTE: On this version, only blocking mode is supported. * * Input Parameters: * sd socket handle * buf Points to the buffer where the message should be stored * len Specifies the length in bytes of the buffer pointed to * by the buffer argument. * flags Specifies the type of message reception. * On this version, this parameter is not supported. * from pointer to an address structure indicating the source * address: sockaddr. On this version only AF_INET is * supported. * fromlen source address tructure size * * Returned Value: * Return the number of bytes received, or -1 if an error * occurred * ****************************************************************************/ int cc3000_recvfrom_impl(long sd, void *buf, long len, long flags, struct sockaddr *from, socklen_t *fromlen); /**************************************************************************** * Name: cc3000_send_impl * * Decription: * Write data to TCP socket * This function is used to transmit a message to another * socket. * * NOTE: On this version, only blocking mode is supported. * * Input Parameters: * sd socket handle * buf Points to a buffer containing the message to be sent * len message size in bytes * flags On this version, this parameter is not supported * * Returned Value: * Return the number of bytes transmitted, or -1 if an * error occurred * ****************************************************************************/ int cc3000_send_impl(long sd, const void *buf, long len, long flags); /**************************************************************************** * Name: cc3000_sendto_impl * * Decription: * Write data to TCP socket * This function is used to transmit a message to another * socket. * * NOTE: On this version, only blocking mode is supported. * * Input Parameters: * sd socket handle * buf Points to a buffer containing the message to be sent * len message size in bytes * flags On this version, this parameter is not supported * to pointer to an address structure indicating the destination * address: sockaddr. On this version only AF_INET is * supported. * tolen destination address structure size * * Returned Value: * Return the number of bytes transmitted, or -1 if an * error occurred * ****************************************************************************/ int cc3000_sendto_impl(long sd, FAR const void *buf, long len, long flags, FAR const struct sockaddr *to, socklen_t tolen); #ifndef CC3000_TINY_DRIVER /**************************************************************************** * Name: cc3000_gethostbyname_impl * * Decription: * Get host IP by name. Obtain the IP Address of machine on network, * by its name. * * NOTE: On this version, only blocking mode is supported. Also note that * the function requires DNS server to be configured prior to its * usage. * * Input Parameters: * hostname host name * usNameLen name length * out_ip_addr This parameter is filled in with host IP address. * In case that host name is not resolved, * out_ip_addr is zero. * * Returned Value: * On success, positive is returned. On error, negative is returned * ****************************************************************************/ //struct hostent *gethostbyname(const char *name); int cc3000_gethostbyname_impl(char * hostname, uint16_t usNameLen, unsigned long* out_ip_addr); #endif /**************************************************************************** * Name: cc3000_mdnsAdvertiser_impl * * Decription: * Set CC3000 in mDNS advertiser mode in order to advertise itself. * * Input Parameters: * mdnsEnabled flag to enable/disable the mDNS feature * deviceServiceName Service name as part of the published * canonical domain name * deviceServiceNameLength Length of the service name * * Returned Value: * On success, zero is returned, return SOC_ERROR if socket was not * opened successfully, or if an error occurred. * ****************************************************************************/ int cc3000_mdnsadvertiser_impl(uint16_t mdnsEnabled, char * deviceServiceName, uint16_t deviceServiceNameLength); #ifdef __cplusplus } #endif // __cplusplus #endif // __DRIVERS_WIRELESS_CC3000_SOCKET_H