/**************************************************************************** * fs/nxffs/nxffs_dump.c * * Copyright (C) 2011, 2013 Gregory Nutt. All rights reserved. * Author: Gregory Nutt * * References: Linux/Documentation/filesystems/romfs.txt * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in * the documentation and/or other materials provided with the * distribution. * 3. Neither the name NuttX nor the names of its contributors may be * used to endorse or promote products derived from this software * without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE * POSSIBILITY OF SUCH DAMAGE. * ****************************************************************************/ /**************************************************************************** * Included Files ****************************************************************************/ #include #include #include #include #include #include #include #include #include "nxffs.h" /**************************************************************************** * Pre-processor Definitions ****************************************************************************/ /**************************************************************************** * Private Types ****************************************************************************/ struct nxffs_blkinfo_s { struct mtd_geometry_s geo; FAR uint8_t *buffer; off_t nblocks; off_t block; off_t offset; #if defined(CONFIG_DEBUG) && defined(CONFIG_DEBUG_FS) bool verbose; #endif }; /**************************************************************************** * Private Data ****************************************************************************/ static const char g_hdrformat[] = " BLOCK:OFFS TYPE STATE LENGTH\n"; static const char g_format[] = " %5d:%-5d %s %s %5d\n"; /**************************************************************************** * Private Functions ****************************************************************************/ /**************************************************************************** * Name: nxffs_analyzeinode * * Description: * Analyze one candidate inode found in the block. * ****************************************************************************/ #if defined(CONFIG_DEBUG) && defined(CONFIG_DEBUG_FS) static inline ssize_t nxffs_analyzeinode(FAR struct nxffs_blkinfo_s *blkinfo, int offset) { FAR struct nxffs_inode_s inode; off_t nextblock; uint8_t state; uint32_t noffs; uint32_t doffs; //uint32_t utc; uint32_t ecrc; uint32_t datlen; uint32_t crc; size_t spaceleft; /* Verify that there is space for an inode header remaining in the block */ if (offset + SIZEOF_NXFFS_INODE_HDR > blkinfo->geo.blocksize) { /* No.. then this can't be an inode header */ return ERROR; } /* Unpack the header */ memcpy(&inode, &blkinfo->buffer[offset], SIZEOF_NXFFS_INODE_HDR); noffs = nxffs_rdle32(inode.noffs); doffs = nxffs_rdle32(inode.doffs); //utc = nxffs_rdle32(inode.utc); ecrc = nxffs_rdle32(inode.crc); datlen = nxffs_rdle32(inode.datlen); /* Misc. sanity checks */ if (noffs < blkinfo->offset + offset + SIZEOF_NXFFS_BLOCK_HDR) { /* The name begins before the inode header. This can't can't be * a real inode header (or it is a corrupted one). */ return ERROR; } /* Can we verify the inode? We need to have the inode name in the same * block to do that (or get access to the next block) */ if (doffs < blkinfo->offset + offset + SIZEOF_NXFFS_BLOCK_HDR) { /* The first data block begins before the inode header. This can't can't * be a real inode header (or it is a corrupted one). */ return ERROR; } spaceleft = (blkinfo->nblocks - blkinfo->block) * blkinfo->geo.blocksize; spaceleft -= (offset + SIZEOF_NXFFS_BLOCK_HDR); if (datlen > spaceleft) { /* The data length is greater than what would fit in the rest of FLASH * (even ignoring block and data header sizes. */ return ERROR; } /* The name begins after the inode header. Does it begin in this block? */ nextblock = blkinfo->offset + blkinfo->geo.blocksize; if (noffs > nextblock) { /* Note than we cannot verify the inode header */ if (blkinfo->verbose) { syslog(LOG_NOTICE, g_format, blkinfo->block, offset, "INODE", "UNVERFD", datlen); } return ERROR; } /* The name begins in this block. Does it also end in this block? */ if (noffs + inode.namlen > nextblock) { /* No.. Assume that this is not an inode. */ return ERROR; } /* Calculate the CRC */ state = inode.state; inode.state = CONFIG_NXFFS_ERASEDSTATE; nxffs_wrle32(inode.crc, 0); crc = crc32((FAR const uint8_t *)&inode, SIZEOF_NXFFS_INODE_HDR); crc = crc32part(&blkinfo->buffer[noffs - blkinfo->offset], inode.namlen, crc); if (crc != ecrc) { syslog(LOG_NOTICE, g_format, blkinfo->block, offset, "INODE", "CRC BAD", datlen); return ERROR; } /* If must be a good header */ if (state == INODE_STATE_FILE) { if (blkinfo->verbose) { syslog(LOG_NOTICE, g_format, blkinfo->block, offset, "INODE", "OK ", datlen); } } else if (state == INODE_STATE_DELETED) { if (blkinfo->verbose) { syslog(LOG_NOTICE, g_format, blkinfo->block, offset, "INODE", "DELETED", datlen); } } else { syslog(LOG_NOTICE, g_format, blkinfo->block, offset, "INODE", "CORRUPT", datlen); } /* Return the block-relative offset to the next byte after the inode name */ return noffs + inode.namlen - offset - blkinfo->offset; } #endif /**************************************************************************** * Name: nxffs_analyzedata * * Description: * Analyze one candidate inode found in the block. * ****************************************************************************/ #if defined(CONFIG_DEBUG) && defined(CONFIG_DEBUG_FS) static inline ssize_t nxffs_analyzedata(FAR struct nxffs_blkinfo_s *blkinfo, int offset) { struct nxffs_data_s dathdr; uint32_t ecrc; uint16_t datlen; uint32_t crc; /* Copy and unpack the data block header */ memcpy(&dathdr, &blkinfo->buffer[offset], SIZEOF_NXFFS_DATA_HDR); ecrc = nxffs_rdle32(dathdr.crc); datlen = nxffs_rdle16(dathdr.datlen); /* Sanity checks */ if (offset + SIZEOF_NXFFS_DATA_HDR + datlen > blkinfo->geo.blocksize) { /* Data does not fit in within the block, this can't be a data block */ return ERROR; } /* Calculate the CRC */ nxffs_wrle32(dathdr.crc, 0); crc = crc32((FAR const uint8_t *)&dathdr, SIZEOF_NXFFS_DATA_HDR); crc = crc32part(&blkinfo->buffer[offset + SIZEOF_NXFFS_DATA_HDR], datlen, crc); if (crc != ecrc) { syslog(LOG_NOTICE, g_format, blkinfo->block, offset, "DATA ", "CRC BAD", datlen); return ERROR; } /* If must be a good header */ if (blkinfo->verbose) { syslog(LOG_NOTICE, g_format, blkinfo->block, offset, "DATA ", "OK ", datlen); } return SIZEOF_NXFFS_DATA_HDR + datlen; } #endif /**************************************************************************** * Name: nxffs_analyze * * Description: * Analyze the content of one block. * ****************************************************************************/ #if defined(CONFIG_DEBUG) && defined(CONFIG_DEBUG_FS) static inline void nxffs_analyze(FAR struct nxffs_blkinfo_s *blkinfo) { FAR struct nxffs_block_s *blkhdr; ssize_t nbytes; int hdrndx; int datndx; int inndx; int i; /* Verify that there is a header on the block */ blkhdr = (FAR struct nxffs_block_s *)blkinfo->buffer; if (memcmp(blkhdr->magic, g_blockmagic, NXFFS_MAGICSIZE) != 0) { syslog(LOG_NOTICE, g_format, blkinfo->block, 0, "BLOCK", "NO FRMT", blkinfo->geo.blocksize); } else if (blkhdr->state == BLOCK_STATE_GOOD) { size_t datsize = blkinfo->geo.blocksize - SIZEOF_NXFFS_BLOCK_HDR; size_t nerased = nxffs_erased(blkinfo->buffer + SIZEOF_NXFFS_BLOCK_HDR, datsize); if (nerased == datsize) { if (blkinfo->verbose) { syslog(LOG_NOTICE, g_format, blkinfo->block, 0, "BLOCK", "ERASED ", blkinfo->geo.blocksize); } return; } #if 0 /* Too much output, to little information */ else { syslog(LOG_NOTICE, g_format, blkinfo->block, 0, "BLOCK", "IN USE ", blkinfo->geo.blocksize); } #endif } else if (blkhdr->state == BLOCK_STATE_BAD) { syslog(LOG_NOTICE, g_format, blkinfo->block, 0, "BLOCK", "BAD ", blkinfo->geo.blocksize); } else { syslog(LOG_NOTICE, g_format, blkinfo->block, 0, "BLOCK", "CORRUPT", blkinfo->geo.blocksize); } /* Serach for Inode and data block headers. */ inndx = 0; datndx = 0; for (i = SIZEOF_NXFFS_BLOCK_HDR; i < blkinfo->geo.blocksize; i++) { uint8_t ch = blkinfo->buffer[i]; if (ch == g_inodemagic[inndx]) { inndx++; datndx = 0; if (inndx == NXFFS_MAGICSIZE) { hdrndx = i - NXFFS_MAGICSIZE + 1; nbytes = nxffs_analyzeinode(blkinfo, hdrndx); if (nbytes > 0) { i = hdrndx + nbytes - 1; } inndx = 0; } } else if (ch == g_datamagic[datndx]) { datndx++; inndx = 0; if (datndx == NXFFS_MAGICSIZE) { hdrndx = i - NXFFS_MAGICSIZE + 1; nbytes = nxffs_analyzedata(blkinfo, hdrndx); if (nbytes > 0) { i = hdrndx + nbytes - 1; } datndx = 0; } } } } #endif /**************************************************************************** * Public Functions ****************************************************************************/ /**************************************************************************** * Name: nxffs_dump * * Description: * Dump a summary of the contents of an NXFFS file system. CONFIG_DEBUG * and CONFIG_DEBUG_FS must be enabled for this function to do anything. * * Input Parameters: * mtd - The MTD device that provides the interface to NXFFS-formatted * media. * verbose - FALSE: only show errors * * Returned Value: * Zero is returned on success. Otherwise, a negated errno value is * returned to indicate the nature of the failure. * ****************************************************************************/ int nxffs_dump(FAR struct mtd_dev_s *mtd, bool verbose) { #if defined(CONFIG_DEBUG) && defined(CONFIG_DEBUG_FS) struct nxffs_blkinfo_s blkinfo; int ret; /* Get the volume geometry. (casting to uintptr_t first eliminates * complaints on some architectures where the sizeof long is different * from the size of a pointer). */ memset(&blkinfo, 0, sizeof(struct nxffs_blkinfo_s)); ret = MTD_IOCTL(mtd, MTDIOC_GEOMETRY, (unsigned long)((uintptr_t)&blkinfo.geo)); if (ret < 0) { fdbg("ERROR: MTD ioctl(MTDIOC_GEOMETRY) failed: %d\n", -ret); return ret; } /* Save the verbose output indication */ blkinfo.verbose = verbose; /* Allocate a buffer to hold one block */ blkinfo.buffer = (FAR uint8_t *)kmm_malloc(blkinfo.geo.blocksize); if (!blkinfo.buffer) { fdbg("ERROR: Failed to allocate block cache\n"); return -ENOMEM; } /* Now read every block on the device */ syslog(LOG_NOTICE, "NXFFS Dump:\n"); syslog(LOG_NOTICE, g_hdrformat); blkinfo.nblocks = blkinfo.geo.erasesize * blkinfo.geo.neraseblocks / blkinfo.geo.blocksize; for (blkinfo.block = 0, blkinfo.offset = 0; blkinfo.block < blkinfo.nblocks; blkinfo.block++, blkinfo.offset += blkinfo.geo.blocksize) { /* Read the next block */ ret = MTD_BREAD(mtd, blkinfo.block, 1, blkinfo.buffer); if (ret < 0) { #ifndef CONFIG_NXFFS_NAND /* Read errors are fatal */ fdbg("ERROR: Failed to read block %d\n", blkinfo.block); kmm_free(blkinfo.buffer); return ret; #else /* A read error is probably fatal on all media but NAND. * On NAND, the read error probably just signifies a block * with an uncorrectable ECC failure. So, to handle NAND, * just report the read error and continue. */ syslog(LOG_NOTICE, g_format, blkinfo.block, 0, "BLOCK", "RD FAIL", blkinfo.geo.blocksize); #endif } else { /* Analyze the block that we just read */ nxffs_analyze(&blkinfo); } } syslog(LOG_NOTICE, "%d blocks analyzed\n", blkinfo.nblocks); kmm_free(blkinfo.buffer); return OK; #else return -ENOSYS; #endif }