/**************************************************************************** * arch/or1k/include/mor1kx/irq.h * * Copyright (C) 2018 Extent3D. All rights reserved. * Author: Matt Thompson * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in * the documentation and/or other materials provided with the * distribution. * 3. Neither the name NuttX nor the names of its contributors may be * used to endorse or promote products derived from this software * without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE * POSSIBILITY OF SUCH DAMAGE. * ****************************************************************************/ /* This file should never be included directly but, rather, only indirectly * through nuttx/irq.h */ #ifndef __ARCH_OR1K_INCLUDE_MOR1KX_IRQ_H #define __ARCH_OR1K_INCLUDE_MOR1KX_IRQ_H /**************************************************************************** * Included Files ****************************************************************************/ #include #include #ifndef __ASSEMBLY__ # include # include #endif #include /**************************************************************************** * Pre-processor Definitions ****************************************************************************/ #define OR1K_NR_EXT_IRQ (32) #define OR1K_NR_INT_IRQ (1) #define NR_IRQS (OR1K_NR_EXT_IRQ + OR1K_NR_INT_IRQ) /* External interrupts are numbered 0-31. These can be used directly * as bit shift offsets in the programmable interrupt controller register. */ #define OR1K_IRQ_EXT0 (0) #define OR1K_IRQ_EXT1 (1) #define OR1K_IRQ_EXT2 (2) #define OR1K_IRQ_EXT3 (3) #define OR1K_IRQ_EXT4 (4) #define OR1K_IRQ_EXT5 (5) #define OR1K_IRQ_EXT6 (6) #define OR1K_IRQ_EXT7 (7) #define OR1K_IRQ_EXT8 (8) #define OR1K_IRQ_EXT9 (9) #define OR1K_IRQ_EXT10 (10) #define OR1K_IRQ_EXT11 (11) #define OR1K_IRQ_EXT12 (12) #define OR1K_IRQ_EXT13 (13) #define OR1K_IRQ_EXT14 (14) #define OR1K_IRQ_EXT15 (15) #define OR1K_IRQ_EXT16 (16) #define OR1K_IRQ_EXT17 (17) #define OR1K_IRQ_EXT18 (18) #define OR1K_IRQ_EXT19 (19) #define OR1K_IRQ_EXT20 (20) #define OR1K_IRQ_EXT21 (21) #define OR1K_IRQ_EXT22 (22) #define OR1K_IRQ_EXT23 (23) #define OR1K_IRQ_EXT24 (24) #define OR1K_IRQ_EXT25 (25) #define OR1K_IRQ_EXT26 (26) #define OR1K_IRQ_EXT27 (27) #define OR1K_IRQ_EXT28 (28) #define OR1K_IRQ_EXT29 (29) #define OR1K_IRQ_EXT30 (30) #define OR1K_IRQ_EXT31 (31) /* Internal interrupts are numbered 32-xx */ #define OR1K_IRQ_TICK (32) /* IRQ Stack Frame Format: * * We're going to store [r1..r31], pc and sr * into a register set for context switches * and exception handlers. * * Note that the PC and SR can be removed once * context switches are done through syscall exceptions. * * We should rely on EPCR[0-15], ESR[0-15] and shadow regs. * * Indices into the xcp.regs array: */ #define REG_R1 (0) #define REG_R2 (1) #define REG_R3 (2) #define REG_R4 (3) #define REG_R5 (4) #define REG_R6 (5) #define REG_R7 (6) #define REG_R8 (7) #define REG_R9 (8) #define REG_R10 (9) #define REG_R11 (10) #define REG_R12 (11) #define REG_R13 (12) #define REG_R14 (13) #define REG_R15 (14) #define REG_R16 (15) #define REG_R17 (16) #define REG_R18 (17) #define REG_R19 (18) #define REG_R20 (19) #define REG_R21 (20) #define REG_R22 (21) #define REG_R23 (22) #define REG_R24 (23) #define REG_R25 (24) #define REG_R26 (25) #define REG_R27 (26) #define REG_R28 (27) #define REG_R29 (28) #define REG_R30 (29) #define REG_R31 (30) #define REG_PC (31) #define REG_SR (32) #define XCPTCONTEXT_REGS (33) #define XCPTCONTEXT_SIZE (4 * XCPTCONTEXT_REGS) /**************************************************************************** * Public Types ****************************************************************************/ /* The exception context structure defines how state is stored * for interrupt handlers and context switches * * All general purpose registers, the re-entry point (PC), and SR * are stored in the regs array. */ #ifndef __ASSEMBLY__ struct xcptcontext { /* Register save area */ uint32_t regs[XCPTCONTEXT_REGS]; /* The following function pointer is non-zero if there * are pending signals to be processed. */ void *sigdeliver; /* Actual type is sig_deliver_t */ /* These are saved copies of LR and CPSR used during * signal processing. * * REVISIT: Because there is only one copy of these save areas, * only a single signal handler can be active. This precludes * queuing of signal actions. As a result, signals received while * another signal handler is executing will be ignored! */ uint32_t saved_pc; uint32_t saved_flags; }; #endif /**************************************************************************** * Inline functions ****************************************************************************/ #ifndef __ASSEMBLY__ /* Name: up_irq_save, up_irq_restore, and friends. * * NOTE: This function should never be called from application code and, * as a general rule unless you really know what you are doing, this * function should not be called directly from operating system code either: * Typically, the wrapper functions, enter_critical_section() and * leave_critical section(), are probably what you really want. */ /* Save the current interrupt enable state & disable IRQs. */ static inline irqstate_t up_irq_save(void) { irqstate_t flags; irqstate_t x; mfspr(SPR_SYS_SR, flags); /* Disable IRQs */ x = flags & ~(SPR_SR_IEE | SPR_SR_TEE); mtspr(SPR_SYS_SR, x); return flags; } /* Restore saved state */ static inline void up_irq_restore(irqstate_t flags) { uint32_t x; mfspr(SPR_SYS_SR, x); x |= flags & (SPR_SR_IEE | SPR_SR_TEE); mtspr(SPR_SYS_SR, x); } /* Enable IRQs */ static inline void up_irq_enable(void) inline_function; static inline void up_irq_enable(void) { irqstate_t flags; mfspr(SPR_SYS_SR, flags); flags |= (SPR_SR_IEE | SPR_SR_TEE); mtspr(SPR_SYS_SR, flags); } #endif /* __ASSEMBLY__ */ /**************************************************************************** * Public Data ****************************************************************************/ /**************************************************************************** * Public Function Prototypes ****************************************************************************/ #ifndef __ASSEMBLY__ #ifdef __cplusplus #define EXTERN extern "C" extern "C" { #else #define EXTERN extern #endif #undef EXTERN #ifdef __cplusplus } #endif #endif #endif /* __ARCH_OR1K_INCLUDE_MOR1KX_IRQ_H */