#
# For a description of the syntax of this configuration file,
# see the file kconfiglanguage.txt in the NuttX tools repository.
#

config SAMV7_GPIO_ENC
	bool "GPIO driver based encoder"
	default n
	depends on SENSORS_QENCODER
	---help---
		This options allows the usage of an encoder based on a GPIO driver.
		The encoder is initialized by sam_gpio_enc_init() function call
		from board specific bringup code.

config SAMV7_HSMCI0_AUTOMOUNT
	bool "HSMCI0 automounter"
	default n
	depends on FS_AUTOMOUNTER && SAMV7_HSMCI0

if SAMV7_HSMCI0_AUTOMOUNT

config SAMV7_HSMCI0_AUTOMOUNT_FSTYPE
	string "HSMCI0 file system type"
	default "vfat"

config SAMV7_HSMCI0_AUTOMOUNT_BLKDEV
	string "HSMCI0 block device"
	default "/dev/mmcsd0"

config SAMV7_HSMCI0_AUTOMOUNT_MOUNTPOINT
	string "HSMCI0 mount point"
	default "/mnt/sdcard0"

config SAMV7_HSMCI0_AUTOMOUNT_DDELAY
	int "HSMCI0 debounce delay (milliseconds)"
	default 1000

config SAMV7_HSMCI0_AUTOMOUNT_UDELAY
	int "HSMCI0 unmount retry delay (milliseconds)"
	default 2000

endif # SAMV7_HSMCI0_AUTOMOUNT

config SAMV7_HSMCI0_MOUNT
	bool "HSMCI0 boot mount"
	default n
	depends on !DISABLE_MOUNTPOINT && SAMV7_HSMCI0 && !SAMV7_HSMCI0_AUTOMOUNT

if SAMV7_HSMCI0_MOUNT

config SAMV7_HSMCI0_MOUNT_FSTYPE
	string "HSMCI0 file system type"
	default "vfat"

config SAMV7_HSMCI0_MOUNT_BLKDEV
	string "HSMCI0 block device"
	default "/dev/mmcsd0"

config SAMV7_HSMCI0_MOUNT_MOUNTPOINT
	string "HSMCI0 mount point"
	default "/bin"

endif # SAMV7_HSMCI0_MOUNT

config SAMV7_PROGMEM_OTA_PARTITION
	bool
	default n
	select ARCH_RAMFUNCS
	select BCH
	select MTD
	select MTD_BYTE_WRITE
	select MTD_PARTITION
	select MTD_PROGMEM
	select SAMV7_PROGMEM

config SAMV7_MCUBOOT_HEADER_SIZE
	hex
	default 0x200
	depends on SAMV7_FORMAT_MCUBOOT

menuconfig SAMV7_FORMAT_MCUBOOT
	bool "MCUboot bootable format"
	default n
	select SAMV7_PROGMEM_OTA_PARTITION
	---help---
		The MCUboot support of loading the firmware images.

if SAMV7_FORMAT_MCUBOOT

comment "MCUboot Application Image OTA Update support"

config SAMV7_OTA_PRIMARY_SLOT_OFFSET
	hex "MCUboot application image primary slot offset"
	default 0x20000

config SAMV7_OTA_PRIMARY_SLOT_DEVPATH
	string "Application image primary slot device path"
	default "/dev/ota0"

config SAMV7_OTA_SECONDARY_SLOT_OFFSET
	hex "MCUboot application image secondary slot offset"
	default 0x48000  if SAMV7_MEM_FLASH_512
	default 0x80000  if SAMV7_MEM_FLASH_1024
	default 0x100000 if SAMV7_MEM_FLASH_2048

config SAMV7_OTA_SECONDARY_SLOT_DEVPATH
	string "Application image secondary slot device path"
	default "/dev/ota1"

config SAMV7_OTA_SLOT_SIZE
	hex "MCUboot application image slot size (in bytes)"
	default 0x28000  if SAMV7_MEM_FLASH_512
	default 0x60000  if SAMV7_MEM_FLASH_1024
	default 0xe0000  if SAMV7_MEM_FLASH_2048

config SAMV7_OTA_SCRATCH_OFFSET
	hex "MCUboot scratch partition offset"
	default 0x70000  if SAMV7_MEM_FLASH_512
	default 0xe0000  if SAMV7_MEM_FLASH_1024
	default 0x1e0000 if SAMV7_MEM_FLASH_2048

config SAMV7_OTA_SCRATCH_DEVPATH
	string "Scratch partition device path"
	default "/dev/otascratch"

config SAMV7_OTA_SCRATCH_SIZE
	hex "MCUboot scratch partition size (in bytes)"
	default 0x10000  if SAMV7_MEM_FLASH_512
	default 0x20000

endif # SAMV7_FORMAT_MCUBOOT