/**************************************************************************** * boards/arm/gd32f4/gd32f470ik-eval/include/board.h * * Licensed to the Apache Software Foundation (ASF) under one or more * contributor license agreements. See the NOTICE file distributed with * this work for additional information regarding copyright ownership. The * ASF licenses this file to you under the Apache License, Version 2.0 (the * "License"); you may not use this file except in compliance with the * License. You may obtain a copy of the License at * * http://www.apache.org/licenses/LICENSE-2.0 * * Unless required by applicable law or agreed to in writing, software * distributed under the License is distributed on an "AS IS" BASIS, WITHOUT * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the * License for the specific language governing permissions and limitations * under the License. * ****************************************************************************/ #ifndef __BOARDS_ARM_GD32F470IK_EVAL_INCLUDE_BOARD_H #define __BOARDS_ARM_GD32F470IK_EVAL_INCLUDE_BOARD_H /**************************************************************************** * Included Files ****************************************************************************/ #include #ifndef __ASSEMBLY__ # include #endif #define GD32_BOARD_SYSCLK_PLL_HXTAL /* Do not include GD32F4 header files here */ /**************************************************************************** * Pre-processor Definitions ****************************************************************************/ /* Clocking *****************************************************************/ /* The GD32F470IK-EVAL board features a single 25MHz crystal. * * This is the default configuration: * System clock source : PLL (HXTAL) * SYSCLK(Hz) : 200000000 Determined by PLL config * HCLK(Hz) : 200000000 (GD32_SYSCLK_FREQUENCY) * AHB Prescaler : 1 (GD32_RCU_CFG0_AHB_PSC) * APB2 Prescaler : 2 (GD32_RCU_CFG0_APB2_PSC) * APB1 Prescaler : 4 (GD32_RCU_CFG0_APB1_PSC) * HXTAL value(Hz) : 25000000 (GD32_BOARD_XTAL) * PLLM : 25 (GD32_PLL_PLLM) * PLLN : 400 (RCU_PLL_PLLN) * PLLP : 2 (GD32_PLL_PLLP) * PLLQ : 7 (GD32_PLL_PLLQ) */ /* IRC16M - 16 MHz RC factory-trimmed * IRC32K - 32 KHz RC * HXTAL - On-board crystal frequency is 25MHz * LXTAL - 32.768 kHz */ #ifndef CONFIG_GD32F470I_BOARD_HXTAL_VALUE # define GD32_BOARD_HXTAL 25000000ul #else # define GD32_BOARD_HXTAL CONFIG_GD32F470I_BOARD_HXTAL_VALUE #endif #define GD32_IRC16M_VALUE 16000000ul #define GD32_IRC32K_VALUE 32000u #define GD32_HXTAL_VALUE GD32_BOARD_HXTAL #define GD32_LXTAL_VALUE 32768u #if defined(CONFIG_GD32F470I_200MHZ) /* Main PLL Configuration. * * PLL source is HXTAL * PLL_VCO = (GD32_HXTAL_VALUE / PLLM) * PLLN * = (25,000,000 / 25) * 400 * = 400,000,000 * SYSCLK = PLL_VCO / PLLP * = 400,000,000 / 2 = 168,000,000 * USB, SDIO and RNG Clock * = PLL_VCO / PLLQ * = 48,000,000 */ #define GD32_PLL_PLLPSC RCU_PLL_PLLPSC(25) #define GD32_PLL_PLLN RCU_PLL_PLLN(400) #define GD32_PLL_PLLP RCU_PLL_PLLP(2) #define GD32_PLL_PLLQ RCU_PLL_PLLQ(7) #define GD32_SYSCLK_FREQUENCY 200000000ul #elif defined(CONFIG_GD32F470I_168MHZ) /* Main PLL Configuration. * * PLL source is HXTAL * PLL_VCO = (GD32_HXTAL_VALUE / PLLM) * PLLN * = (25,000,000 / 25) * 336 * = 336,000,000 * SYSCLK = PLL_VCO / PLLP * = 336,000,000 / 2 = 168,000,000 * USB, SDIO and RNG Clock * = PLL_VCO / PLLQ * = 48,000,000 */ #define GD32_PLL_PLLPSC RCU_PLL_PLLPSC(25) #define GD32_PLL_PLLN RCU_PLL_PLLN(336) #define GD32_PLL_PLLP RCU_PLL_PLLP(2) #define GD32_PLL_PLLQ RCU_PLL_PLLQ(7) #define GD32_SYSCLK_FREQUENCY 168000000ul #elif defined(CONFIG_GD32F470I_240MHZ) /* Main PLL Configuration. * * PLL source is HXTAL * PLL_VCO = (GD32_HXTAL_VALUE / PLLM) * PLLN * = (25,000,000 / 25) * 336 * = 336,000,000 * SYSCLK = PLL_VCO / PLLP * = 336,000,000 / 2 = 168,000,000 * USB, SDIO and RNG Clock * = PLL_VCO / PLLQ * = 48,000,000 */ #define GD32_PLL_PLLPSC RCU_PLL_PLLPSC(25) #define GD32_PLL_PLLN RCU_PLL_PLLN(480) #define GD32_PLL_PLLP RCU_PLL_PLLP(2) #define GD32_PLL_PLLQ RCU_PLL_PLLQ(7) #define GD32_SYSCLK_FREQUENCY 240000000ul #endif /* AHB clock (HCLK) is SYSCLK */ #define GD32_RCU_CFG0_AHB_PSC RCU_CFG0_AHBPSC_CKSYS_DIV1 /* HCLK = SYSCLK / 1 */ #define GD32_HCLK_FREQUENCY GD32_SYSCLK_FREQUENCY /* APB2 clock (PCLK2) is HCLK/2 */ #define GD32_RCU_CFG0_APB2_PSC RCU_CFG0_APB2PSC_CKAHB_DIV2 /* PCLK2 = HCLK / 2 */ #define GD32_PCLK2_FREQUENCY (GD32_HCLK_FREQUENCY/2) /* APB1 clock (PCLK1) is HCLK/4 */ #define GD32_RCU_CFG0_APB1_PSC RCU_CFG0_APB1PSC_CKAHB_DIV4 /* PCLK1 = HCLK / 4 */ #define GD32_PCLK1_FREQUENCY (GD32_HCLK_FREQUENCY / 4) /* Timers driven from APB1 will be twice PCLK1 */ #define GD32_APB1_TIMER2_CLKIN (2*GD32_PCLK1_FREQUENCY) #define GD32_APB1_TIMER3_CLKIN (2*GD32_PCLK1_FREQUENCY) #define GD32_APB1_TIMER4_CLKIN (2*GD32_PCLK1_FREQUENCY) #define GD32_APB1_TIMER5_CLKIN (2*GD32_PCLK1_FREQUENCY) #define GD32_APB1_TIMER6_CLKIN (2*GD32_PCLK1_FREQUENCY) #define GD32_APB1_TIMER7_CLKIN (2*GD32_PCLK1_FREQUENCY) #define GD32_APB1_TIMER12_CLKIN (2*GD32_PCLK1_FREQUENCY) #define GD32_APB1_TIMER13_CLKIN (2*GD32_PCLK1_FREQUENCY) #define GD32_APB1_TIMER14_CLKIN (2*GD32_PCLK1_FREQUENCY) /* Timers driven from APB2 will be twice PCLK2 */ #define GD32_APB2_TIMER1_CLKIN (2*GD32_PCLK2_FREQUENCY) #define GD32_APB2_TIMER8_CLKIN (2*GD32_PCLK2_FREQUENCY) #define GD32_APB2_TIMER9_CLKIN (2*GD32_PCLK2_FREQUENCY) #define GD32_APB2_TIMER10_CLKIN (2*GD32_PCLK2_FREQUENCY) #define GD32_APB2_TIMER11_CLKIN (2*GD32_PCLK2_FREQUENCY) /* Timer Frequencies, if APBx is set to 1, frequency is same to APBx * otherwise frequency is 2xAPBx. * Note: TIMER1,8 are on APB2, others on APB1 */ #define BOARD_TIMER1_FREQUENCY GD32_HCLK_FREQUENCY #define BOARD_TIMER2_FREQUENCY (GD32_HCLK_FREQUENCY/2) #define BOARD_TIMER3_FREQUENCY (GD32_HCLK_FREQUENCY/2) #define BOARD_TIMER4_FREQUENCY (GD32_HCLK_FREQUENCY/2) #define BOARD_TIMER5_FREQUENCY (GD32_HCLK_FREQUENCY/2) #define BOARD_TIMER6_FREQUENCY (GD32_HCLK_FREQUENCY/2) #define BOARD_TIMER7_FREQUENCY (GD32_HCLK_FREQUENCY/2) #define BOARD_TIMER8_FREQUENCY GD32_HCLK_FREQUENCY /* LED definitions **********************************************************/ /* The GD32F470IK_EVAL board has board has three LEDs. The LED1, LED2 and * LED3 are controlled by GPIO. LED1 is connected to PD4, LED2 is connected * to PD5, LED3 is connected to PG3 * * If CONFIG_ARCH_LEDS is not defined, then the user can control the LEDs * in any way. * The following definitions are used to access individual LEDs. */ /* LED index values */ typedef enum { BOARD_LED1 = 0, BOARD_LED2 = 1, BOARD_LED3 = 2, BOARD_LEDS } led_typedef_enum; /* LED bits */ #define BOARD_LED1_BIT (1 << BOARD_LED1) #define BOARD_LED2_BIT (1 << BOARD_LED2) #define BOARD_LED3_BIT (1 << BOARD_LED3) /* If CONFIG_ARCH_LEDS is defined, the usage by the board port is defined in * include/board.h and src/gd32f4xx_autoleds.c. The LEDs are used to encode * OS-related events as follows: * * * SYMBOL Meaning LED state * LED1 LED2 LED3 * ---------------------- -------------------------- ------ ------ --- */ #define LED_STARTED 0 /* NuttX has been started OFF OFF OFF */ #define LED_HEAPALLOCATE 1 /* Heap has been allocated ON OFF OFF */ #define LED_IRQSENABLED 2 /* Interrupts enabled OFF ON OFF */ #define LED_STACKCREATED 3 /* Idle stack created OFF OFF ON */ #define LED_INIRQ 4 /* In an interrupt ON ON OFF */ #define LED_SIGNAL 5 /* In a signal handler ON OFF ON */ #define LED_ASSERTION 6 /* An assertion failed OFF ON ON */ #define LED_PANIC 7 /* The system has crashed FLASH ON ON */ #define LED_IDLE 8 /* MCU is is sleep mode OFF FLASH OFF */ /* Button definitions *******************************************************/ /* The GD32F470I Eval supports three user buttons: Wakeup, Tamper and * User key, they are connected to GPIO PA0, PC13, PB14. * A low value will be sensed when the button is depressed. */ typedef enum { BUTTON_WAKEUP = 0, BUTTON_TAMPER = 1, BUTTON_USER = 2, NUM_BUTTONS } key_typedef_enum; #define BUTTON_WAKEUP_BIT (1 << BUTTON_WAKEUP) #define BUTTON_TAMPER_BIT (1 << BUTTON_TAMPER) #define BUTTON_USER_BIT (1 << BUTTON_USER) /* Alternate function pin selections ****************************************/ #if defined(CONFIG_GD32F470IK_EVAL_CONSOLE_BOARD) /* USART0: * * These configurations assume that you are using a standard RS-232 * shield with the serial interface with RX on PA10 and TX on PA10: * * -------- --------------- * GD32F470IK-EVAL * -- ----- --------- ----- * RX USART0_RX PA10 * TX USART0_TX PA9 * -- ----- --------- ----- */ # define GPIO_USART0_RX GPIO_USART0_RX_1 # define GPIO_USART0_TX GPIO_USART0_TX_1 #if defined(CONFIG_SERIAL_IFLOWCONTROL) && defined(CONFIG_USART0_IFLOWCONTROL) # define GPIO_USART0_RTS GPIO_USART0_RTS_1 # endif #if defined(CONFIG_SERIAL_OFLOWCONTROL) && defined(CONFIG_USART0_OFLOWCONTROL) # define GPIO_USART0_CTS GPIO_USART0_CTS_1 # endif #endif #if CONFIG_GD32F4_USART0_TXDMA # define DMA_CHANNEL_USART0_TX DMA_REQ_USART0_TX #endif #if CONFIG_GD32F4_USART0_RXDMA # define DMA_CHANNEL_USART0_RX DMA_REQ_USART0_RX_1 #endif #if defined(CONFIG_GD32F4_USART_RXDMA) || defined(CONFIG_GD32F4_USART_TXDMA) # define USART_DMA_INTEN (DMA_CHXCTL_SDEIE | DMA_CHXCTL_TAEIE | DMA_CHXCTL_FTFIE) #endif /* USART3: * Use USART3 and the USB virtual COM port */ #if defined(GD32F470IK_EVAL_CONSOLE_VIRTUAL) # define GPIO_USART3_RX GPIO_USART3_RX_3 # define GPIO_USART3_TX GPIO_USART3_TX_3 #endif /* I2C0 gpios: * * PB6 I2C0_SCL * PB7 I2C0_SDA * */ #define GPIO_I2C0_SCL GPIO_I2C0_SCL_1 #define GPIO_I2C0_SDA GPIO_I2C0_SDA_1 /* SPI flash * * PG12 SPI5_MISO * PG14 SPI5_MOSI * PG13 SPI5_SCK * * PG9 SPI5_CS * */ #define GPIO_SPI5_CSPIN (GPIO_CFG_PORT_G | GPIO_PIN9_OUTPUT) #define GPIO_SPI5_MISO_PIN ((GPIO_SPI5_MISO & ~GPIO_CFG_SPEED_MASK) | GPIO_CFG_SPEED_25MHZ) #define GPIO_SPI5_MOSI_PIN ((GPIO_SPI5_MOSI & ~GPIO_CFG_SPEED_MASK) | GPIO_CFG_SPEED_25MHZ) #define GPIO_SPI5_SCK_PIN ((GPIO_SPI5_SCK & ~GPIO_CFG_SPEED_MASK) | GPIO_CFG_SPEED_25MHZ) #define GPIO_SPI5_IO2_PIN ((GPIO_SPI5_IO2 & ~GPIO_CFG_SPEED_MASK) | GPIO_CFG_SPEED_25MHZ) #define GPIO_SPI5_IO3_PIN ((GPIO_SPI5_IO3 & ~GPIO_CFG_SPEED_MASK) | GPIO_CFG_SPEED_25MHZ) /* The GD32 F4 connects to a DP83848 PHY using these pins: * * GD32F470I Eval BOARD DP83848 * GPIO SIGNAL PIN NAME * -------- ------------ ------------- * PG11 RMII_TX_EN TXEN * PG13 RMII_TXD0 TXD0 * PG14 RMII_TXD1 TXD1 * PC4 RMII_RXD0 RXD_0/PHYAD1 * PC5 RMII_RXD1 RXD_1/PHYAD2 * PA7 RMII_CRS_DV RX_DV/MII_MODE * PC1 RMII_MDC MDC * PA2 RMII_MDIO MDIO * NRST NRST RESET_N * PA1 RMII_REF_CLK X1 * PB15 RMII_INT PWR_DOWN/INT * * The PHY address is 1. */ #define GPIO_ENET_RMII_TX_EN GPIO_ENET_RMII_TX_EN_2 #define GPIO_ENET_RMII_TXD0 GPIO_ENET_RMII_TXD0_2 #define GPIO_ENET_RMII_TXD1 GPIO_ENET_RMII_TXD1_2 #ifdef CONFIG_GD32F4_ENET_PTP /* Enable pulse-per-second (PPS) output signal */ # define GPIO_ENET_PPS_OUT GPIO_ENET_PPS_OUT_1 #endif #ifdef CONFIG_GD32F4_RMII_CKOUT0 # define BOARD_CFG_CKOUT0_SOURCE RCU_CFG0_CKOUT0SEL_PLLP # define BOARD_CFG_CKOUT0_DIVIDER RCU_CFG0_CKOUT0_DIV4 #endif /* SDIO gpios * * PD2 SDIO_CMD * PC12 SDIO_CLK * PC8 SDIO_DAT0 * PC9 SDIO_DAT1 * PC10 SDIO_DAT2 * PC11 SDIO_DAT3 * */ #define GPIO_SDIO_CMD_PIN GPIO_SDIO_CMD_2 #define GPIO_SDIO_CLK_PIN GPIO_SDIO_CK_2 #define GPIO_SDIO_DAT0_PIN GPIO_SDIO_D0_2 #define GPIO_SDIO_DAT1_PIN GPIO_SDIO_D1_3 #define GPIO_SDIO_DAT2_PIN GPIO_SDIO_D2_3 #define GPIO_SDIO_DAT3_PIN GPIO_SDIO_D3 #ifdef CONFIG_GD32F4_SDIO_DMA # define SDIO_DMA_INTEN (DMA_CHXCTL_SDEIE | DMA_CHXCTL_TAEIE | DMA_CHXCTL_FTFIE) #endif #endif /* __BOARDS_ARM_GD32F470IK_EVAL_INCLUDE_BOARD_H */