/**************************************************************************** * net/udp/udp_callback.c * * Copyright (C) 2007-2009, 2015 Gregory Nutt. All rights reserved. * Author: Gregory Nutt * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in * the documentation and/or other materials provided with the * distribution. * 3. Neither the name NuttX nor the names of its contributors may be * used to endorse or promote products derived from this software * without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE * POSSIBILITY OF SUCH DAMAGE. * ****************************************************************************/ /**************************************************************************** * Included Files ****************************************************************************/ #include #if defined(CONFIG_NET) && defined(CONFIG_NET_UDP) #include #include #include #include #include #include #include #include "devif/devif.h" #include "udp/udp.h" /**************************************************************************** * Pre-processor Definitions ****************************************************************************/ #define IPv4BUF ((FAR struct ipv4_hdr_s *)&dev->d_buf[NET_LL_HDRLEN(dev)]) #define IPv6BUF ((FAR struct ipv6_hdr_s *)&dev->d_buf[NET_LL_HDRLEN(dev)]) #define UDPIPv4BUF ((FAR struct udp_hdr_s *)&dev->d_buf[NET_LL_HDRLEN(dev) + IPv4_HDRLEN]) #define UDPIPv6BUF ((FAR struct udp_hdr_s *)&dev->d_buf[NET_LL_HDRLEN(dev) + IPv6_HDRLEN]) /**************************************************************************** * Private Functions ****************************************************************************/ /**************************************************************************** * Name: udp_datahandler * * Description: * Handle the receipt of UDP data by adding the newly received packet to * the UDP read-ahead buffer. * ****************************************************************************/ static uint16_t udp_datahandler(FAR struct net_driver_s *dev, FAR struct udp_conn_s *conn, FAR uint8_t *buffer, uint16_t buflen) { FAR struct iob_s *iob; int ret; #ifdef CONFIG_NET_IPv6 FAR struct sockaddr_in6 src_addr6 = { 0 }; #endif #ifdef CONFIG_NET_IPv4 FAR struct sockaddr_in src_addr4 = { 0 }; #endif FAR void *src_addr; uint8_t src_addr_size; /* Allocate on I/O buffer to start the chain (throttling as necessary). * We will not wait for an I/O buffer to become available in this context. */ iob = iob_tryalloc(true, IOBUSER_NET_UDP_READAHEAD); if (iob == NULL) { nerr("ERROR: Failed to create new I/O buffer chain\n"); return 0; } #ifdef CONFIG_NET_IPv6 #ifdef CONFIG_NET_IPv4 if (IFF_IS_IPv6(dev->d_flags)) #endif { FAR struct udp_hdr_s *udp = UDPIPv6BUF; FAR struct ipv6_hdr_s *ipv6 = IPv6BUF; src_addr6.sin6_family = AF_INET6; src_addr6.sin6_port = udp->srcport; net_ipv6addr_copy(src_addr6.sin6_addr.s6_addr, ipv6->srcipaddr); src_addr_size = sizeof(src_addr6); src_addr = &src_addr6; } #endif /* CONFIG_NET_IPv6 */ #ifdef CONFIG_NET_IPv4 #ifdef CONFIG_NET_IPv6 else #endif { #ifdef CONFIG_NET_IPv6 /* Hybrid dual-stack IPv6/IPv4 implementations recognize a special * class of addresses, the IPv4-mapped IPv6 addresses. */ if (conn->domain == PF_INET6) { FAR struct udp_hdr_s *udp = UDPIPv6BUF; FAR struct ipv6_hdr_s *ipv6 = IPv6BUF; in_addr_t ipv4addr; /* Encode the IPv4 address as an IPv-mapped IPv6 address */ src_addr6.sin6_family = AF_INET6; src_addr6.sin6_port = udp->srcport; ipv4addr = net_ip4addr_conv32(ipv6->srcipaddr); ip6_map_ipv4addr(ipv4addr, src_addr6.sin6_addr.s6_addr16); src_addr_size = sizeof(src_addr6); src_addr = &src_addr6; } else #endif { FAR struct udp_hdr_s *udp = UDPIPv4BUF; FAR struct ipv4_hdr_s *ipv4 = IPv4BUF; src_addr4.sin_family = AF_INET; src_addr4.sin_port = udp->srcport; net_ipv4addr_copy(src_addr4.sin_addr.s_addr, net_ip4addr_conv32(ipv4->srcipaddr)); memset(src_addr4.sin_zero, 0, sizeof(src_addr4.sin_zero)); src_addr_size = sizeof(src_addr4); src_addr = &src_addr4; } } #endif /* CONFIG_NET_IPv4 */ /* Copy the src address info into the I/O buffer chain. We will not wait * for an I/O buffer to become available in this context. It there is * any failure to allocated, the entire I/O buffer chain will be discarded. */ ret = iob_trycopyin(iob, (FAR const uint8_t *)&src_addr_size, sizeof(uint8_t), 0, true, IOBUSER_NET_UDP_READAHEAD); if (ret < 0) { /* On a failure, iob_trycopyin return a negated error value but does * not free any I/O buffers. */ nerr("ERROR: Failed to add data to the I/O buffer chain: %d\n", ret); iob_free_chain(iob, IOBUSER_NET_UDP_READAHEAD); return 0; } ret = iob_trycopyin(iob, (FAR const uint8_t *)src_addr, src_addr_size, sizeof(uint8_t), true, IOBUSER_NET_UDP_READAHEAD); if (ret < 0) { /* On a failure, iob_trycopyin return a negated error value but does * not free any I/O buffers. */ nerr("ERROR: Failed to add data to the I/O buffer chain: %d\n", ret); iob_free_chain(iob, IOBUSER_NET_UDP_READAHEAD); return 0; } if (buflen > 0) { /* Copy the new appdata into the I/O buffer chain */ ret = iob_trycopyin(iob, buffer, buflen, src_addr_size + sizeof(uint8_t), true, IOBUSER_NET_UDP_READAHEAD); if (ret < 0) { /* On a failure, iob_trycopyin return a negated error value but * does not free any I/O buffers. */ nerr("ERROR: Failed to add data to the I/O buffer chain: %d\n", ret); iob_free_chain(iob, IOBUSER_NET_UDP_READAHEAD); return 0; } } /* Add the new I/O buffer chain to the tail of the read-ahead queue */ ret = iob_tryadd_queue(iob, &conn->readahead); if (ret < 0) { nerr("ERROR: Failed to queue the I/O buffer chain: %d\n", ret); iob_free_chain(iob, IOBUSER_NET_UDP_READAHEAD); return 0; } #ifdef CONFIG_NET_UDP_NOTIFIER /* Provided notification(s) that additional UDP read-ahead data is * available. */ udp_readahead_signal(conn); #endif ninfo("Buffered %d bytes\n", buflen); return buflen; } /**************************************************************************** * Name: net_dataevent * * Description: * Handling the network UDP_NEWDATA event. * ****************************************************************************/ static inline uint16_t net_dataevent(FAR struct net_driver_s *dev, FAR struct udp_conn_s *conn, uint16_t flags) { uint16_t ret; uint8_t *buffer = dev->d_appdata; int buflen = dev->d_len; uint16_t recvlen; ret = (flags & ~UDP_NEWDATA); /* Is there new data? With non-zero length? (Certain connection events * can have zero-length with UDP_NEWDATA set just to cause an ACK). */ ninfo("No receive on connection\n"); /* Save as the packet data as in the read-ahead buffer. NOTE that * partial packets will not be buffered. */ recvlen = udp_datahandler(dev, conn, buffer, buflen); if (recvlen < buflen) { /* There is no handler to receive new data and there are no free * read-ahead buffers to retain the data -- drop the packet. */ ninfo("Dropped %d bytes\n", dev->d_len); #ifdef CONFIG_NET_STATISTICS g_netstats.udp.drop++; #endif } /* In any event, the new data has now been handled */ dev->d_len = 0; return ret; } /**************************************************************************** * Public Functions ****************************************************************************/ /**************************************************************************** * Name: udp_callback * * Description: * Inform the application holding the UDP socket of a change in state. * * Returned Value: * OK if packet has been processed, otherwise ERROR. * * Assumptions: * This function must be called with the network locked. * ****************************************************************************/ uint16_t udp_callback(FAR struct net_driver_s *dev, FAR struct udp_conn_s *conn, uint16_t flags) { ninfo("flags: %04x\n", flags); /* Some sanity checking */ if (conn) { /* Perform the callback */ flags = devif_conn_event(dev, conn, flags, conn->list); if ((flags & UDP_NEWDATA) != 0) { /* Data was not handled.. dispose of it appropriately */ flags = net_dataevent(dev, conn, flags); } } return flags; } #endif /* CONFIG_NET && CONFIG_NET_UDP */