/**************************************************************************** * drivers/mtd/skeleton.c * * Copyright (C) 2018 Gregory Nutt. All rights reserved. * Author: Gregory Nutt * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in * the documentation and/or other materials provided with the * distribution. * 3. Neither the name NuttX nor the names of its contributors may be * used to endorse or promote products derived from this software * without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE * POSSIBILITY OF SUCH DAMAGE. * ****************************************************************************/ /**************************************************************************** * Included Files ****************************************************************************/ #include #include #include #include #include #include /**************************************************************************** * Pre-processor Definitions ****************************************************************************/ /**************************************************************************** * Private Types ****************************************************************************/ /* This type represents the state of the MTD device. The struct mtd_dev_s * must appear at the beginning of the definition so that you can freely * cast between pointers to struct mtd_dev_s and struct skel_dev_s. */ struct skel_dev_s { struct mtd_dev_s mtd; /* Other implementation specific data may follow here */ }; /**************************************************************************** * Private Function Prototypes ****************************************************************************/ /* MTD driver methods */ static int skel_erase(FAR struct mtd_dev_s *dev, off_t startblock, size_t nblocks); static ssize_t skel_bread(FAR struct mtd_dev_s *dev, off_t startblock, size_t nblocks, FAR uint8_t *buf); static ssize_t skel_bwrite(FAR struct mtd_dev_s *dev, off_t startblock, size_t nblocks, FAR const uint8_t *buf); static ssize_t skel_read(FAR struct mtd_dev_s *dev, off_t offset, size_t nbytes, FAR uint8_t *buffer); #ifdef CONFIG_MTD_BYTE_WRITE static ssize_t skel_write(FAR struct mtd_dev_s *dev, off_t offset, size_t nbytes, FAR const uint8_t *buffer); #endif static int skel_ioctl(FAR struct mtd_dev_s *dev, int cmd, unsigned long arg); /**************************************************************************** * Private Data ****************************************************************************/ /* This structure holds the state of the MTD driver */ static struct skel_dev_s g_skeldev = { { skel_erase, skel_bread, skel_bwrite, skel_read, #ifdef CONFIG_MTD_BYTE_WRITE skel_write, /* Should be NULL if the byte write method is not supported */ #endif skel_ioctl }, /* Initialization of any other implementation specific data goes here */ }; /**************************************************************************** * Private Functions ****************************************************************************/ /**************************************************************************** * Name: skel_erase * * Description: * Erase several blocks, each of the size previously reported. * ****************************************************************************/ static int skel_erase(FAR struct mtd_dev_s *dev, off_t startblock, size_t nblocks) { FAR struct skel_dev_s *priv = (FAR struct skel_dev_s *)dev; /* The interface definition assumes that all erase blocks are the same * size. If that is not true for this particular device, then transform * the start block and nblocks as necessary. */ /* Erase the specified blocks and return status (OK or a negated errno) */ return OK; } /**************************************************************************** * Name: skel_bread * * Description: * Read the specified number of blocks into the user provided buffer. * ****************************************************************************/ static ssize_t skel_bread(FAR struct mtd_dev_s *dev, off_t startblock, size_t nblocks, FAR uint8_t *buf) { FAR struct skel_dev_s *priv = (FAR struct skel_dev_s *)dev; /* The interface definition assumes that all read/write blocks are the * same size. If that is not true for this particular device, then * transform the start block and nblocks as necessary. */ /* Read the specified blocks into the provided user buffer and return * status (The positive, number of blocks actually read or a negated * errno). */ return 0; } /**************************************************************************** * Name: skel_bwrite * * Description: * Write the specified number of blocks from the user provided buffer. * ****************************************************************************/ static ssize_t skel_bwrite(FAR struct mtd_dev_s *dev, off_t startblock, size_t nblocks, FAR const uint8_t *buf) { FAR struct skel_dev_s *priv = (FAR struct skel_dev_s *)dev; /* The interface definition assumes that all read/write blocks are the * same size. If that is not true for this particular device, then * transform the start block and nblocks as necessary. */ /* Write the specified blocks from the provided user buffer and return * status (The positive, number of blocks actually written or a negated * errno) */ return 0; } /**************************************************************************** * Name: skel_read * * Description: * Read the specified number of bytes to the user provided buffer. * ****************************************************************************/ static ssize_t skel_read(FAR struct mtd_dev_s *dev, off_t offset, size_t nbytes, FAR uint8_t *buffer) { FAR struct skel_dev_s *priv = (FAR struct skel_dev_s *)dev; /* Some devices may support byte oriented read (optional). Byte-oriented * writing is inherently block oriented on most MTD devices and is not * supported. It is recommended that low-level drivers not support read() * if it requires buffering -- let the higher level logic handle that. If * the read method is not implemented, just set the method pointer to NULL * in the struct mtd_dev_s instance. */ /* The interface definition assumes that all read/write blocks are the * same size. If that is not true for this particular device, then * transform the start block and nblocks as necessary. */ /* Read the specified bytes into the provided user buffer and return * status (The positive, number of bytes actually read or a negated * errno) */ return 0; } /**************************************************************************** * Name: skel_write * * Description: * Some FLASH parts have the ability to write an arbitrary number of * bytes to an arbitrary offset on the device. This method should be * implement only for devices that support such access. * ****************************************************************************/ #ifdef CONFIG_MTD_BYTE_WRITE static ssize_t skel_write(FAR struct mtd_dev_s *dev, off_t offset, size_t nbytes, FAR const uint8_t *buffer) { return -ENOSYS; } #endif /**************************************************************************** * Name: skel_ioctl ****************************************************************************/ static int skel_ioctl(FAR struct mtd_dev_s *dev, int cmd, unsigned long arg) { FAR struct skel_dev_s *priv = (FAR struct skel_dev_s *)dev; int ret = -EINVAL; /* Assume good command with bad parameters */ switch (cmd) { case MTDIOC_GEOMETRY: { FAR struct mtd_geometry_s *geo = (FAR struct mtd_geometry_s *)arg; if (geo) { /* Populate the geometry structure with information needed to know * the capacity and how to access the device. * * NOTE: that the device is treated as though it where just an array * of fixed size blocks. That is most likely not true, but the client * will expect the device logic to do whatever is necessary to make it * appear so. */ geo->blocksize = 512; /* Size of one read/write block */ geo->erasesize = 4096; /* Size of one erase block */ geo->neraseblocks = 1024; /* Number of erase blocks */ ret = OK; } } break; case MTDIOC_XIPBASE: { FAR void **ppv = (FAR void**)arg; if (ppv) { /* If media is directly acccesible, return (void*) base address * of device memory. NULL otherwise. It is acceptable to omit * this case altogether and simply return -ENOTTY. */ *ppv = NULL; ret = OK; } } break; case MTDIOC_BULKERASE: { /* Erase the entire device */ ret = OK; } break; default: ret = -ENOTTY; /* Bad command */ break; } return ret; } /**************************************************************************** * Public Functions ****************************************************************************/ /**************************************************************************** * Name: skel_initialize * * Description: * Create and initialize an MTD device instance. MTD devices are not * registered in the file system, but are created as instances that can * be bound to other functions (such as a block or character driver front * end). * ****************************************************************************/ FAR struct mtd_dev_s *skel_initialize(void) { /* Allocate an instance of the private data structure -- OR, if there can * only be a single instance of the driver, then use a shared, global * device structure. */ /* Return the implementation-specific state structure as the MTD device */ return (FAR struct mtd_dev_s *)&g_skeldev; }