/**************************************************************************** * include/nuttx/power/battery_gauge.h * NuttX Battery Fuel Gauge Interfaces * * Licensed to the Apache Software Foundation (ASF) under one or more * contributor license agreements. See the NOTICE file distributed with * this work for additional information regarding copyright ownership. The * ASF licenses this file to you under the Apache License, Version 2.0 (the * "License"); you may not use this file except in compliance with the * License. You may obtain a copy of the License at * * http://www.apache.org/licenses/LICENSE-2.0 * * Unless required by applicable law or agreed to in writing, software * distributed under the License is distributed on an "AS IS" BASIS, WITHOUT * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the * License for the specific language governing permissions and limitations * under the License. * ****************************************************************************/ #ifndef __INCLUDE_NUTTX_POWER_BATTERY_GAUGE_H #define __INCLUDE_NUTTX_POWER_BATTERY_GAUGE_H /**************************************************************************** * Included Files ****************************************************************************/ #include #include #include #include #include #include #ifdef CONFIG_BATTERY_GAUGE /**************************************************************************** * Pre-processor Definitions ****************************************************************************/ /* Configuration */ /* CONFIG_BATTERY_GAUGE - Upper half battery fuel gauge driver support * * Specific, lower-half drivers will have other configuration requirements * such as: * * CONFIG_I2C - I2C support *may* be needed * CONFIG_I2C_MAX1704X - The MAX1704x driver must be explicitly selected. */ /* IOCTL Commands */ /* The upper-half battery fuel gauge driver provides a character driver * "wrapper" * around the lower-half battery driver that does all of the * real work. * Since there is no real data transfer to/or from a battery, all of the * driver interaction is through IOCTIL commands. The IOCTL commands * supported by the upper-half driver simply provide calls into the * lower half as summarized below: * * BATIOC_STATE - Return the current state of the battery (see * enum battery_status_e). * Input value: A pointer to type int. * BATIOC_ONLINE - Return 1 if the battery is online; 0 if offline. * Input value: A pointer to type bool. * BATIOC_VOLTAGE - Return the current battery voltage. The returned value * is a fixed precision number in units of volts. * Input value: A pointer to type b16_t. * BATIOC_CAPACITY - Return the current battery capacity or State of Charge * (SoC). The returned value is a fixed precision percentage of the * batteries full capacity. * Input value: A pointer to type b16_t. * BATIOC_CURRENT - Return the current of the battery . The returned value * is a fixed precision number in units of ma. * Input value: A pointer to type b16_t. * BATIOC_TEMPERATURE- Return the current temperature of the battery. * Input value: A pointer to type b8_t. * BATIOC_CHIPID- Return the chip id of the gauge. * Input value: A pointer to type unsigned int. */ /**************************************************************************** * Public Types ****************************************************************************/ /* This structure defines the lower half battery interface */ struct battery_gauge_dev_s; struct battery_gauge_operations_s { /* Return the current battery state (see enum battery_status_e) */ int (*state)(struct battery_gauge_dev_s *dev, int *status); /* Return true if the batter is online */ int (*online)(struct battery_gauge_dev_s *dev, bool *status); /* Current battery voltage */ int (*voltage)(struct battery_gauge_dev_s *dev, b16_t *value); /* Battery capacity */ int (*capacity)(struct battery_gauge_dev_s *dev, b16_t *value); /* Battery current */ int (*current)(struct battery_gauge_dev_s *dev, b16_t *value); /* Battery temp */ int (*temp)(struct battery_gauge_dev_s *dev, b8_t *value); /* Battery chipid */ int (*chipid)(struct battery_gauge_dev_s *dev, unsigned int *value); }; /* This structure defines the battery driver state structure */ struct battery_gauge_dev_s { /* Fields required by the upper-half driver */ FAR const struct battery_gauge_operations_s *ops; /* Battery operations */ sem_t batsem; /* Enforce mutually exclusive access */ struct list_node flist; /* Data fields specific to the lower-half driver may follow */ }; /**************************************************************************** * Public Data ****************************************************************************/ #ifndef __ASSEMBLY__ #ifdef __cplusplus #define EXTERN extern "C" extern "C" { #else #define EXTERN extern #endif /**************************************************************************** * Public Function Prototypes ****************************************************************************/ /**************************************************************************** * Name: battery_gauge_changed ****************************************************************************/ int battery_gauge_changed(FAR struct battery_gauge_dev_s *dev, uint32_t mask); /**************************************************************************** * Name: battery_gauge_register * * Description: * Register a lower half battery driver with the common, upper-half * battery driver. * * Input Parameters: * devpath - The location in the pseudo-filesystem to create the driver. * Recommended standard is "/dev/bat0", "/dev/bat1", etc. * dev - An instance of the battery state structure . * * Returned Value: * Zero on success or a negated errno value on failure. * ****************************************************************************/ int battery_gauge_register(FAR const char *devpath, FAR struct battery_gauge_dev_s *dev); /**************************************************************************** * Name: bq27426_initialize * * Description: * Initialize the bq2742 battery driver and return an instance of the * lower_half interface that may be used with battery_gauge_register(); * * This driver requires: * * CONFIG_BATTERY_GAUGE - Upper half battery fuel gauge driver support * CONFIG_I2C - I2C support * CONFIG_BQ27426 - And the driver must be explicitly selected. * * Input Parameters: * i2c - An instance of the I2C interface to use to communicate with the * bq27426 * addr - The I2C address of the bq27426 (Better be 0x55). * frequency - The I2C frequency * * Returned Value: * A pointer to the initializeed battery driver instance. A NULL pointer * is returned on a failure to initialize the bq27426 lower half. * ****************************************************************************/ #if defined(CONFIG_I2C) && defined(CONFIG_BQ27426) struct i2c_master_s; /* Forward reference */ FAR struct battery_gauge_dev_s *bq27426_initialize( FAR struct i2c_master_s *i2c, uint8_t addr, uint32_t frequency); #endif /**************************************************************************** * Name: max1704x_initialize * * Description: * Initialize the MAX1704x battery driver and return an instance of the * lower_half interface that may be used with battery_gauge_register(); * * This driver requires: * * CONFIG_BATTERY_GAUGE - Upper half battery fuel gauge driver support * CONFIG_I2C - I2C support * CONFIG_I2C_MAX1704X - And the driver must be explicitly selected. * CONFIG_I2C_MAX17040 or CONFIG_I2C_MAX17041 - The driver must know which * chip is on the board in order to scale the voltage correctly. * * Input Parameters: * i2c - An instance of the I2C interface to use to communicate with * the MAX1704x. * addr - The I2C address of the MAX1704x (Better be 0x36). * frequency - The I2C frequency * * Returned Value: * A pointer to the initializeed battery driver instance. A NULL pointer * is returned on a failure to initialize the MAX1704x lower half. * ****************************************************************************/ #if defined(CONFIG_I2C) && defined(CONFIG_I2C_MAX1704X) struct i2c_master_s; /* Forward reference */ FAR struct battery_gauge_dev_s *max1704x_initialize( FAR struct i2c_master_s *i2c, uint8_t addr, uint32_t frequency); #endif #undef EXTERN #ifdef __cplusplus } #endif #endif /* __ASSEMBLY__ */ #endif /* CONFIG_BATTERY_GAUGE */ #endif /* __INCLUDE_NUTTX_POWER_BATTERY_GAUGE_H */