Xiang Xiao
71e1056e6d
net/icmpv6, neighbor, and netdev: Rename netdev_dev_lladdrsize() to netdev_lladdrsize() and move the prototype to include/nuttx/nex/netdev.h, giving is global scope within the OS. Reviewer: This degrades the integrity of the modular architecture by introducing a new coupling via C function call. Not a good thing at all.
2018-11-09 16:05:11 -06:00
Xiang Xiao
4f25b83f8f
et/icmpv6: Remove the coupling between ICMPv6 and Ethernet by moving all Ethernet stuff to neighbor_ethernet_out.c and make the mac address as first field.
2018-11-09 15:41:23 -06:00
Gregory Nutt
33ed27ae65
Squashed commit of the following:
...
net/mld: Checksum calculation needs to know the full size of the IPv6 header, including the size of the extension headers. The payload size in the IPv64 header must include the extension headers (not considered part of the header in this case). Fixes a few additional errors in size, endian-ness and checksum calculations. Wireshark now reports the the outgoing Report has a good checksum.
net/mld/mld_query.c: Add a cast to assure that the left shift does not overflow.
2018-11-05 08:56:07 -06:00
Gregory Nutt
5bb216fb90
net/: There are many different checks for IPv6 multicast addresses. Most of the checks are different. RFC 3513 clearly specifies how to detect an IPv6 multilcast address: they should begin with 0xffxx. I did not change some of the checks in ipv6_input.c, however. In that file, the comments indicate that the code should only pick of certain mulicast address that begin withi 0xff02.
2018-06-23 10:13:38 -06:00
Gregory Nutt
b54ffe858a
Standardization of some function headers.
2018-03-13 09:52:27 -06:00
Gregory Nutt
7cf88d7dbd
Make sure that labeling is used consistently in all function headers.
2018-02-01 10:00:02 -06:00
Anthony Merlino
02721f9d95
net/icmpv6: Add some header file necessary for correct build.
...
drivers/wireless/ieee80211: Fix typos and spelling errors as needed for Photon build.
2017-11-01 06:58:33 -06:00
Gregory Nutt
aeb59383cf
Remove CONFIG_NET_MULTILINK. This increases code size by a little, but greatly reduces the complexity of the network code.
2017-08-08 15:26:09 -06:00
Gregory Nutt
b4a0ac53a8
Networking: Improve naming and simplify some logic of previous commit.
2017-07-07 06:51:52 -06:00
Gregory Nutt
70c6b52132
ICMPv6: Fix an address size calculation that was bungled in a recent commit.
2017-07-06 19:37:01 -06:00
Gregory Nutt
a5f361e984
ICMPv6: Fix so that ICMPv6 can be used with 6LoWPAN.
2017-07-06 12:00:59 -06:00
Gregory Nutt
79256573e1
net: network drver now retains Ethernet MAC address in a union so that other link layer addresses may be used in a MULTILINK environment.
2017-04-22 11:10:30 -06:00
Gregory Nutt
43eb04bb8f
Without lowsyslog() *llinfo() is not useful. Eliminate and replace with *info().
2016-06-20 11:59:15 -06:00
Gregory Nutt
fc3540cffe
Replace all occurrences of vdbg with vinfo
2016-06-11 11:59:51 -06:00
Gregory Nutt
6209c51206
net/: More clean-up of spacing/alignment issues
2015-10-08 15:10:04 -06:00
Gregory Nutt
af086c40ff
Remove dangling whitespace
2015-10-04 15:28:54 -06:00
Gregory Nutt
7a745c3fa4
Use common macro(s) for calculating link layer header length. From Brennan Ashton.
2015-04-13 13:53:13 -06:00
Gregory Nutt
77d8f2f63d
Add some inclusions of nuttx/net.h to two files. Without these there can be compilation errors in certain configurations. From Max Neklyudov.
2015-02-13 13:43:19 -06:00
Gregory Nutt
f4bb7f14e1
Networking: Clean up network status collection and presentation for IPv6
2015-01-24 08:26:12 -06:00
Gregory Nutt
30f0a942e1
Networking: First cut at ICMPv6 ping logic
2015-01-23 14:06:08 -06:00
Gregory Nutt
b51c00c8d7
Networking: Need to set the IPv6 EtherType on outgoing IPv6 packets
2015-01-23 09:30:50 -06:00
Gregory Nutt
8132afb3de
Fix some errors in memcpy arguments. No ampersands on array arguments.
2015-01-21 12:42:22 -06:00
Gregory Nutt
3202819328
IPv6 -- various fixed from problems found in testing
2015-01-21 10:29:18 -06:00
Gregory Nutt
cdff532bfa
Networking: When sending ICMPv6 advertisements and solicitations, set the NOARP bit so that we don't overwrite the destination MAC address
2015-01-20 15:59:52 -06:00
Gregory Nutt
67a655ecf0
Networking: Add logic to search the Neighbor Table and update the destination address in the output Ethernet header OR to send an ICMPv6 Neighbor Solicitation if there is no entry in the Neighbor table for the IPv6 address
2015-01-20 14:37:02 -06:00