The defconfigs that test PSRAM on ESP32 contain the `ramtest` app,
but it doesn't test the memory correctly as it try to access the
memory directly. The memory, however, is being used by the system's
heap and `ramtest` can mess with it. Therefore, it makes sense to
test using `mm` testing app.
Current driver supports MTDIOC_BULKERASE ioctl that erases the entire
device. The added ioctl MTDIOC_ERASESECTORS adds possibility to erase
just sectors defined by the user.
This is similar to MEMERASE call in Linux kernel.
Signed-off-by: Michal Lenc <michallenc@seznam.cz>
Add the `IW_AUTH_WPA_VERSION_WPA3` bit field to support selecting
WPA3-SAE networks using the `IW_AUTH_WPA_VERSION` command.
This commit is necessary to enable `wapi`'s support for WPA3.
Summary:
- I noticed that mtu info with ifconfig shows incorrect size.
- This commit fixes this issue.
Impact:
- None
Testing:
- Tested with spresense:wifi_smp
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
I noticed sometimes once config changed, it will not launch to shell,
maybe due to
K210 is a 64-bit platform and without misaligned memory access support.
This patch may fix this problem, it will not introduce new issues at least.
Signed-off-by: Huang Qi <huangqi3@xiaomi.com>
Similar to the fix introduced by
4d6a8663fa, it's necessary to set
one end of the file_pipe as non-blocking temporarily while opening
the other end to avoid it blocking unexpectedily.
The spawn proxy thread is a special existence in NuttX, usually some developers
spend a lot of time on stack overflow of spawn proxy thread:
https://github.com/apache/nuttx/issues/9046https://github.com/apache/nuttx/pull/9081
In order to avoid similar issues, this PR will remove spawn proxy thread to simplify
the process of task/posix_spawn().
1. Postpone the related processing of spawn file actions until after task_init()
2. Delete the temporary thread of spawn proxy and related global variables
Signed-off-by: chao an <anchao@xiaomi.com>
minidump will backtrace failure when use C code to save user context,
because the stack push operation in C code can disrupt the stack information.
Signed-off-by: zhangyuan21 <zhangyuan21@xiaomi.com>
Add private data for spi_bitbang low-level driver to add an instance
specific private data.
And add spi_destroy_bitbang() to clean up a driver instance.
1. stack_alloc_ptr should be freed in kernel mode
2. replace nxsched_release_tcb() to nxtask_uninit() to remove tcb from inactive list
Signed-off-by: chao an <anchao@xiaomi.com>
Timestamp location in can message has changed,
In the original logic timestamp is saved at the end of the data segment:
io_data
-------------------------------------------------
| CAN message | Time Stamp |
-------------------------------------------------
|<--------------- io_len ---------------->|
In the new structure timestamps will reuse NET_LL_GUARDSIZE to isolate CAN messages:
io_data io_offset
-------------------------------------------------
| Time Stamp | CAN message |
-------------------------------------------------
|<-------- io_len --------->|
This PR will:
1. Increase NET_LL_GUARDSIZE to 16 (sizeof(struct timeval)) if NET_CAN && NET_TIMESTAMP are enabled
2. Apply timestamp to adapt to the new structure
Signed-off-by: chao an <anchao@xiaomi.com>
When executing up_fbinitialize, the driver may turn on the vsync interrupt. If the vsync interrupt calls fb_pollnotify before executing fb->vtable->priv = fb it will cause null pointer access and crash.
Signed-off-by: pengyiqiang <pengyiqiang@xiaomi.com>
- Fix DMA addressing issues within litex_sendsetup/litex_recvsetup
- Extend with handling specific to eMMC commands during init & use.
- Cleanup of 4-bit BUS handling for SD and eMMC
- For eMMC, Send CMD0 during init as per JEDEC v4.41 for pre-idle
This commit adds deifiniton of get_timer_period() and adj_timer_period()
functions used by adjtime() interface.
Signed-off-by: Michal Lenc <michallenc@seznam.cz>
This commit adds Linux like adjtime() interface that is used to correct
the system time clock if it varies from real value. The adjustment is
done by slight adjustment of clock period and therefore the adjustment
is without time jumps (both forward and backwards)
The implementation is enabled by CONFIG_CLOCK_ADJTIME and separated from
CONFIG_CLOCK_TIMEKEEPING functions. Options CONFIG_CLOCK_ADJTIME_SLEWLIMIT
and CONFIG_CLOCK_ADJTIME_PERIOD can be used to control the adjustment
speed.
Interfaces up_get_timer_period() and up_adj_timer_period() has to be
defined by architecture level support.
This is not a POSIX interface but derives from 4.3BSD, System V.
It is also supported for Linux compatibility.
Signed-off-by: Michal Lenc <michallenc@seznam.cz>
Tiago Medicci Serrano