Commit Graph

15 Commits

Author SHA1 Message Date
daichuan fe01d7c462 modify for offload checksum and add macro with tcp/icmp/icmpv6/igmp checksum
Signed-off-by: daichuan <daichuan@xiaomi.com>
2024-08-24 20:41:40 +08:00
Alan Carvalho de Assis 82946d0d5f net: Enable ICMP by default if IPv4 is enabled
Signed-off-by: Alan C. Assis <acassis@gmail.com>
2024-07-09 17:08:27 +08:00
wangchen 2e6d0815b2 nuttx/net:Support to PMTUD
RFC 1191
When a router is unable to forward a datagram because it exceeds the
   MTU of the next-hop network and its Don't Fragment bit is set, the
   router is required to return an ICMP Destination Unreachable message
   to the source of the datagram, with the Code indicating
   "fragmentation needed and DF set".  To support the Path MTU Discovery
   technique specified in this memo, the router MUST include the MTU of
   that next-hop network in the low-order 16 bits of the ICMP header
   field that is labelled "unused" in the ICMP specification [7].  The
   high-order 16 bits remain unused, and MUST be set to zero.  Thus, the
   message has the following format:

       0                   1                   2                   3
       0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1
      +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
      |   Type = 3    |   Code = 4    |           Checksum            |
      +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
      |           unused = 0          |         Next-Hop MTU          |
      +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
      |      Internet Header + 64 bits of Original Datagram Data      |
      +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
RFC 1185
Packet Too Big Message

       0                   1                   2                   3
       0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1
      +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
      |     Type      |     Code      |          Checksum             |
      +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
      |                             MTU                               |
      +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
      |                    As much of invoking packet                 |
      +               as will fit without the ICMPv6 packet           +
      |                       exceeding 576 octets                    |

   IPv6 Fields:

   Destination Address

                  Copied from the Source Address field of the invoking
                  packet.

   ICMPv6 Fields:

   Type           2

   Code           0

   MTU            The Maximum Transmission Unit of the next-hop link.

   Description

   A Packet Too Big MUST be sent by a router in response to a packet
   that it cannot forward because the packet is larger than the MTU of
   the outgoing link.  The information in this message is used as part
   of the Path MTU Discovery process [RFC-1191].

Signed-off-by: wangchen <wangchen41@xiaomi.com>
2023-05-12 10:21:52 -03:00
Xiang Xiao 2c5f653bfd Remove the tail spaces from all files except Documentation
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
2023-02-26 13:24:24 -08:00
Fotis Panagiotopoulos 1c07a3a696 Improvements in ICMP connections allocation. 2023-02-20 09:06:46 +08:00
chao an 6898409d04 net/icmp[v6]: ICMP[v6]_NO_STACK should not depends on NET_IPv4/6
Signed-off-by: chao an <anchao@xiaomi.com>
2022-11-20 08:16:20 -03:00
Xiang Xiao 90c52e6f8f Squashed commit of the following:
Author: Gregory Nutt <gnutt@nuttx.org>

    Run all .h and .c files modified in last PR through nxstyle.

Author: Xiang Xiao <xiaoxiang@xiaomi.com>

    Net cleanup (#17)

    * Fix the semaphore usage issue found in tcp/udp

    1. The count semaphore need disable priority inheritance
    2. Loop again if net_lockedwait return -EINTR
    3. Call nxsem_trywait to avoid the race condition
    4. Call nxsem_post instead of sem_post

    * Put the work notifier into free list to avoid the heap fragment in the long run.  Since the allocation strategy is encapsulated internally, we can even refine the implementation later.

    * Network stack shouldn't allocate memory in the poll implementation to avoid the heap fragment in the long run, other modification include:

    1. Select MM_IOB automatically since ICMP[v6] socket can't work without the read ahead buffer
    2. Remove the net lock since xxx_callback_free already do the same thing
    3. TCP/UDP poll should work even the read ahead buffer isn't enabled at all

    * Add NET_ prefix for UDP_NOTIFIER and TCP_NOTIFIER option to align with other UDP/TCP option convention

    * Remove the unused _SF_[IDLE|ACCEPT|SEND|RECV|MASK] flags since there are code to set/clear these flags, but nobody check them.
2019-12-31 09:26:14 -06:00
Xiang Xiao 44bcd2c44d net/: add NET_ICMP[v6]_NO_STACK for usrsock case 2018-11-09 11:25:57 -06:00
Gregory Nutt 70c59a9d91 This commit adds support for semi-standard IPPROTO_ICMP6 sockets. This is a replacement for the non-standard ICMPv6 ping support that violated the portable POSIX OS interface.
Squashed commit of the following:

    net/icmpv6: IPPROT_ICMP6 socket logic now builds without error.
    net/icmpv6:  Add support for read-ahead and poll(). Initial commit is just cloned from ICMP with the appropriate name changes.
    configs/:  All defconfig filess that include CONFIG_NET_ICMPv6_SOCKET=y need to select CONFIG_SYSTEM_PING6=y and deselect CONFIG_DISABLE_POLL.
    Update NSH documention to show that ping6 is now a built in command.
    net/icmpv6:  Add icmpv6_sendto.c and icmpv6_recvfrom.c.  Initial versions are just clones from icmp/ with appropriate name changes.
    net/icmpv6:  Clone some ICMP socket logic as the beginning of support for ICMPv6 socket support.
    Rename CONFIG_NET_ICMPv6_PING to CONFIG_NET_ICMPv6_SOCKET.  Move prototype for icmpv6_ping from include/nuttx/net/icmpv6 to net/icmpv6/icmpv6.h
2017-10-24 11:23:08 -06:00
Gregory Nutt cccc86da09 This change adds support for semi-standard IPPROTO_ICMP AF_INET datagram sockets. This replaces the old ad hoc, nonstandard way of implementing ping with a more standard, socket interface.
Squashed commit of the following:

    net/icmp:  Finishes off icmp_recvfrom().
    net/icmp:  Add readahead support for IPPROTO_ICMP sockets.
    net/icmp:  Add poll() support for IPPROTO_ICMP sockets.
    net/icmp:  Add a connection structure for IPPROTO_ICMP sockets.
    net/icmp:  Implements sendto for the IPPROTO_ICMP socket.
    net/icmp:  Move icmp_sendto() and icmp_recvfrom() to separate files.  They are likely to be complex (when they are implemented).
    net/icmp:  Hook IPPROTO_ICMP sockets into network.  Fix some naming collisions.  Still missing basic ICMP send/receive logic.
    configs: apps/system/ping current need poll() enabled.
    configs: All defconfig files that use to enable low-level support must now enabled CONFIG_SYSTEM_PING.
    net/icmp:  Adds basic build framework to support IPPROTO_ICMP sockets.
2017-10-23 08:45:12 -06:00
Gregory Nutt 6af3ba78b9 Remove CONFIG_NET_PINGADDRCONF. This was a uIP way of assigning IP addresses, but is not standard and not a appropriate feature in general. 2015-12-01 07:48:56 -06:00
Gregory Nutt 342f5fe33d Fix references to the no-longer-existent misc/ directory in comments, README files, and documentation 2015-06-28 08:08:57 -06:00
Gregory Nutt fcd65e9d7d Networking: Make a home for ICMPv6 2015-01-14 14:26:50 -06:00
Gregory Nutt 1a2bcebb4a Clean up some networking configuration menus 2014-06-25 11:01:08 -06:00
Gregory Nutt da4277357c Move arp, icmp, and igmp configuration values into new Kconfig files in those directories 2014-05-30 14:44:07 -06:00