ece6963c21
Update a README file
2014-12-16 07:51:50 -06:00
4aa9320da9
Update README files
2014-12-15 19:01:40 -06:00
623757d77c
Update TODO list and add REVISIT comment
2014-12-13 08:44:28 -06:00
d09bb13833
In case a thread is doing a blocking operation (e.g. read()) on a serial
...
device, while it is being terminated by pthread_cancel(), then
uart_close() gets called, but the semaphore (dev->recv.sem in the above
example) is still blocked.
This means that once the serial device is opened next time, data will
arrive on the serial port (and driver interrupts handled as normal), but
the received characters never arrive in the reader thread.
This patch addresses the problem by re-initializing the semaphores on the
last uart_close() on the device.
2014-12-13 08:07:21 -06:00
a84bd3f433
M25P serial flash driver: Add subsector size of the M24P16 part. From Lazlo
2014-12-10 18:48:36 -06:00
cdc8fc52d1
SmartFS: Implements wear-leveling in the SmartFS. From Ken Pettit
2014-12-09 14:11:15 -06:00
8bd5556b47
Fix compilation errors if CONFIG_DISABLE_MOUNTPOINT is selected
2014-12-08 07:14:31 -06:00
c0c108d5e2
Add support for ST Micro EEPROM device geometries. From Sebastien Lorquet
2014-12-05 09:13:34 -06:00
3cc6bee189
Nucleo-f4x1re: Fix some joystick pin definitions
2014-12-04 12:04:21 -06:00
1f2447502f
SAMA5D3 Xplained: Add support for the Itead Joystick shield
2014-12-03 12:24:23 -06:00
19d31412f7
Update/correct some comments
2014-11-29 07:08:30 -06:00
2b8fe6709b
Add an analog joystick driver. Initial checkin is only a little more of a clone of the discrete joystick driver and is as-of-yet untested
2014-11-28 19:59:27 -06:00
24d4253e1f
Fixes to get the discrete joystick driver and test working
2014-11-28 15:56:18 -06:00
544322edb9
DJoystick: Add a new ioctl to get the support joystick discrete signals
2014-11-28 15:39:57 -06:00
0d04a4e9ba
Fix missing quote in Kconfig
2014-11-28 10:16:58 -06:00
e42f7b552f
This commit is a set of patches 02/11 through 03/11 correcting issues with the CC3000 networking (01/11 was committed separated). Among these 10 patches:
...
03/11: CC3000 driver was getting stuck at recv() when remote host closed connection and application tried to read data from remotely shutdown socket. This patch adds proper handling for remotely closed socket event.
07/11: Socket state initialization was done in 'register', while it should be initialized in 'open' and deinitialized in 'close'. Old way caused problems when device is closed, power-cycled and then reopened as old socket state was left enabled.
08/11: Select thread was getting stuck after 'close, power-cycle, reopen', since selectsem was not properly setup and cleaned up.
09/11 'maxFD' was not properly reset in select worker and not checked for before calling cc3000_select().
10/11: After wlan_stop()/cc3000_close(), irqsem was left with count '-1'. Therefore on next wlan_start()/cc3000_open(), initial value for irqsem was wrong. Additional repeated wlan_start()/wlan_stop() decreased irqsem value further. Obviously this causes driver not to function correctly and freeze.
Patch moves initialization and destruction of waitsem, irqsem and readysem to cc3000_open/cc3000_close.
All are: Signed-off-by: Jussi Kivilinna <jussi.kivilinna@haltian.com>
2014-11-28 08:52:52 -06:00
5f0343bed9
Use usleep instead of usdelay as CONFIG_BOARD_LOOPSPERMSEC might not be calibrated correctly and CC3000 is fine with longer wait.
...
Signed-off-by: Jussi Kivilinna <jussi.kivilinna@haltian.com>
2014-11-28 08:16:30 -06:00
2d9bd07525
Some additional, minor improvements to djoystick interrupt controls
2014-11-27 20:20:10 -06:00
0ec5043a4e
Add an interface definition and upper half driver for a discrete joystick device
2014-11-27 17:42:16 -06:00
57e57bba36
LPC4357 EVB: Ooops got sense of the LED GPIO backward
2014-11-27 12:38:04 -06:00
f2603866e0
Widen the name space: Rename CONFIG_SPI_EEPROM to CONFIG_EEPROM so that I2C EEPROMs can live there too
2014-11-27 11:08:27 -06:00
e3898a7911
Update README
2014-11-27 10:40:51 -06:00
d5c808c1fe
EEPROM: Add a README file
2014-11-27 09:14:19 -06:00
bc3212d70e
EEPROM: Add a README file
2014-11-27 09:14:00 -06:00
d8107d2b97
Loop device should return -EINTR is interrupt by a signal
2014-11-27 09:12:15 -06:00
b29925a63b
EEPROM: prevent writes past end of device. From Sébastien Lorquet
2014-11-27 07:59:43 -06:00
3f2c90c1e9
Fix minor typo in C comments
2014-11-27 06:49:07 -06:00
1a33afb66c
Fix to get a clean build with EEPROM support disabled
2014-11-26 15:37:01 -06:00
40b27115cc
Add support for generic EEPROM access via a character driver. Add also the EEPROM driver itself. From Sebastien Lorquet
2014-11-26 13:55:34 -06:00
9ac09db800
More fixes to problems noted by cppcheck. Some are kind of risky; some are real bugs.
2014-11-25 13:46:14 -06:00
2994448d85
More fixes to problems noted by cppcheck. Some are kind of risky; some are real bugs.
2014-11-25 13:15:09 -06:00
5d231b25f0
SAMA5D3 Xplained: Add an apps/examples/bridge configuration
2014-11-20 16:24:30 -06:00
33627632a5
Network: Fix compilation problem when mutliple networks enabled
2014-11-17 10:22:30 -06:00
b9cd425bc2
Rename CONFIG_NET_BUFSIZE to CONFIG_NET_ETH_MTU in all drivers/net (except slip.c)
2014-11-16 08:53:20 -06:00
25a9005ce7
Remove use of NET_LL_HDRLEN from Ethernet drivers. Use ETH_HDRLEN instead
2014-11-15 09:05:34 -06:00
2b758537ea
Network: Misc fixes for clean complete with both Ethernet and SLIP enabled
2014-11-15 08:55:50 -06:00
388ef8db1a
Netwoek: Ada a parameter to netdev_register() to indicate the link protocol supported by the driver. Use this value to replace some logic commited yesterday
2014-11-15 08:22:51 -06:00
8d00912207
Add mirror (x/y) and inverse video (black<->white) options to the ST7565 LCD driver. From Pierre-noel Bouteville.
2014-11-15 06:43:12 -06:00
ebdff66c8b
ARP: Add support for the case where there are multiple networks: One being Etherenet and the other not (say slip or perhaps someday PPP). In that case, we need to suppress ARP-related operations on the SLIP/PPP interface only
2014-11-14 18:25:33 -06:00
e03c764d92
I don't think that the net_route function has ever worked correctly. The source ip was updated in the match struct instead of the route ip. From Brennan Ashton.
2014-11-14 16:45:25 -06:00
ca15802ae5
Trival fix to comment
2014-11-14 10:58:13 -06:00
9f3d4b30fb
Add st7565.c to build
2014-11-14 06:55:16 -06:00
3576e249b5
Add driver for ST7565 that works with NHD‐C12864KGZ display. From Pierre-noel Bouteville.
2014-11-13 16:03:52 -06:00
c956d6d820
Add support for seeking in BCH. From Sébastien Lorquet.
2014-11-13 09:04:42 -06:00
d9b238b002
Extend MTD support to M25P16. From Sébastien Lorquet
2014-11-07 10:35:03 -06:00
b99db64f15
rwbuffer, fix compiler error
2014-11-05 15:26:48 -06:00
5120d745fd
Fix some typos
2014-10-29 10:48:50 -06:00
6c9f325e1e
Move selection for CONFIG_SERIAL_TERMIOS out of MCU Kconfigs to common drivers/serial/Kconfig. Add CONFIG_ARCH_HAVE_SERIAL_TERMIOS to indicate if an MCU supports TERMIOS
2014-10-27 11:31:16 -06:00
0196b77961
EFM32: Add IDLE power management hooks. Nothing implemented; just define the hooks
2014-10-22 07:26:31 -06:00
37e08c3b49
The olimex-efm32g880f128-stk now defaults to use LEUART1 as the serial console. Also fixes lots of compile bugs from the original LEUART checkin
2014-10-21 11:38:51 -06:00
Gregory Nutt