46dbbe837e
rwbuffer.h moved from include/nuttx/ to include/nuttx/drivers.
2016-07-20 13:54:38 -06:00
6fda036615
Eliminate a warning
2016-07-13 14:09:51 -06:00
43eb04bb8f
Without lowsyslog() *llinfo() is not useful. Eliminate and replace with *info().
2016-06-20 11:59:15 -06:00
efb02f2ef1
drivers/: Change some nerr() ERRORS to nwarn() WARNINGS. Anomolous network evernts are not errors.
2016-06-12 08:31:22 -06:00
a1469a3e95
Add CONFIG_DEBUG_ERROR. Change names of *dbg() * *err()
2016-06-11 15:50:49 -06:00
1cdc746726
Rename CONFIG_DEBUG to CONFIG_DEBUG_FEATURES
2016-06-11 14:14:08 -06:00
fc3540cffe
Replace all occurrences of vdbg with vinfo
2016-06-11 11:59:51 -06:00
3a74a438d9
Rename CONFIG_DEBUG_VERBOSE to CONFIG_DEBUG_INFO
2016-06-11 11:50:18 -06:00
fd896330d8
Remove the final vestiges of up_spiinitialize()
2016-01-27 09:27:56 -06:00
7edf921c5e
Remove CONFIG_SPI_OWNBUS: Now it is not just a good idea, it is the law
2016-01-23 18:54:36 -06:00
f6e49caba8
All SPI-based device drivers needs to call SPI_HWFEATURES() with zero in order to co-exist with drivers that use H/W features
2016-01-23 16:18:13 -06:00
f348e68069
Update to use 64-bit timer when available
2016-01-21 11:54:26 -06:00
b682190f52
Rename all head files in main NuttX repository with names like *internal.h, removing the internal
2015-12-29 17:31:17 -06:00
cf14f8d1b5
drivers/: Fixes to spacing and alignement
2015-10-10 10:41:00 -06:00
342f5fe33d
Fix references to the no-longer-existent misc/ directory in comments, README files, and documentation
2015-06-28 08:08:57 -06:00
0476d8168a
More missing semicolons after DEBUGASSERT
2015-05-27 13:32:39 -06:00
2aa80e06f5
Remove executable flag from more .c and .h files
2015-04-09 08:20:57 -06:00
e4d2822af8
Make some file section headers more consistent with standard
2015-04-08 07:15:32 -06:00
8783526a5f
Fix some bad logic when file system debug is turned on: Arguments to syslog were missing so that garbage was being printed.
2015-03-15 09:34:07 -06:00
c5953bd0e9
Debugging and manuals (this one https://www.sdcard.org/downloads/pls/simplified_specs/part1_410.pdf
...
and this one https://www.sdcard.org/downloads/pls/simplified_specs/part1_410.pdf ) shows that ACMD23
must be preceeded with CMD55 command as any other ACMD commands.
Also, after the block reading wait loop must be inserted before writing the next block of data to
the sd card
From Dmitry Nikolaev via Jussi Kivilinna
2015-03-13 07:26:16 -06:00
82251ccf28
Cosmetic updates from code review
2015-03-04 06:51:56 -06:00
83d6e6403c
drivers/mmcsd/Kconfig: ARCH_HAVE_SDIOWAIT_WRCOMPLETE should not depend on MMCSD_SDIO
2015-01-09 07:21:43 -06:00
089e001874
STM32 SDIO: CONFIG_MMCSD_SDIOWAIT_WRCOMPLETE should not be available unless CONFIG_MMCSD_SDIO=y
2015-01-08 18:12:06 -06:00
f787440a04
STM32 SDIO: Don't let architectures select CONFIG_MMCSD_SDIOWAIT_WRCOMPLETE unless they have implemented SDIOWAIT_WRCOMPLETE
2015-01-08 17:47:34 -06:00
1842525cc2
MMCSD SDIO: Add support for a new SDWAIT_WRCOMPLETE condition. The previous logic used a busy-wait loop to pool the card R1 start to determine when the card was ready for the next transfer. That busy-wait can be quite long -- hundreds of milliseconds. And alternative is to look the the SD D0 pin which will change state when the card is no longer busy.
...
This logic implements a change the avoids the busy-wait poll by reconfiguring the SD D0 pin as a GPIO interrupt, then waiting for the card to becom ready without taking up CPU cycles.
This change is conditioned on CONFIG_MMCSD_SDIOWATI_WRCOMPLETE and is currenlty only implemented for the STM32 SDIO driver.
From David Sidrane
2015-01-08 06:23:42 -06:00
d7d759f7a7
Update everything under nuttx/drivers to use the corrected syslog interfaces
2014-10-08 10:18:58 -06:00
1780810d3d
Rename kmalloc to kmm_malloc for consistency
2014-08-31 17:26:36 -06:00
54fa3b0b59
Rename kfree to kmm_free for consistency with other naming conventions
2014-08-31 17:04:02 -06:00
9c80dfb31c
Updated README file, cosmetic changes to comments and debug output
2014-07-30 10:19:09 -06:00
be8fe9a311
Costmetic update to comments
2014-07-29 20:03:52 -06:00
8516551e54
Add an MTD layer that will add read-ahead or write buffering to any MTD driver (incomplete)
2014-07-11 11:20:11 -06:00
2abe0dd6dd
Change all variadic macros to C99 style
2014-05-22 09:01:51 -06:00
5d7da97a35
SDIO-based MMC/SD improvements from Bob Doiron
2014-04-21 17:15:42 -06:00
056aed1274
Make sure that there is one space between while and condition
2014-04-12 13:09:48 -06:00
303cc1902b
Make sure that there is one space between if and condition
2014-04-12 12:53:19 -06:00
27811d28f9
Cosmetic changes to comments and README
2014-04-07 15:28:04 -06:00
6a524b5734
Enhanced the mmcdd_sdio driver to perform DMA preflight operations and fail DMA read/write requests that fail preflighting. From Mike Smith
2013-10-18 08:24:18 -06:00
944e0fe81d
Changes to stm32_dmacapable interfaces from Mike Smith
2013-10-18 08:06:23 -06:00
773a693ee2
Cosmetic changes to comments and coding style fixes
2013-09-22 14:48:22 -06:00
bc46b447dc
Fix all occurrences of "the the" in documentation and comments
2013-08-27 09:40:19 -06:00
dd3c682443
SAMA5: Some improvements to the HSCMI card removal/insertion logic
2013-08-11 11:13:11 -06:00
82b528e0c8
Serial FIONREAD, FIONWRITE, and TERMIOS I/O processing from Mike Smith, Andrew Tridgell, and and Lorenz Meier
2013-08-10 19:14:05 -06:00
97e13b33ab
MMC/SD SDIO: Correct return values when multiple block transfers are suppressed. From Andrew Tridgell via Lorenz Meier
2013-08-10 18:29:22 -06:00
da4cebf572
SAMA5: Fix HSMCI race condition. Now memory card interface is functional with DMA
2013-08-10 18:01:23 -06:00
968b2553cd
Rearrange configuration settings so that ARCH_HAVE_SDIO is moved to higher, sharable level
2013-08-10 09:06:53 -06:00
ce9eb71495
SAMA5: A few early, easy bug fixes. The rest will all be difficult
2013-08-06 11:29:53 -06:00
09faaccc02
Created new directories to hold SPI-related files
2013-07-01 08:11:54 -06:00
a60e38e13a
Fix error in MMC/SD SPI driver introduced with some recent changes; Update TODO list
2013-06-23 10:45:37 -06:00
161af4bf33
MMC/SD SPI speed field is only used if CONFIG_SPI_OWNBUS is not defined
2013-06-17 18:27:25 -06:00
b9ad057972
MMC/SD driver needs to manage SPI mode and data width as well
2013-06-17 12:31:24 -06:00
Gregory Nutt