3ba0184051
Refresh configuration/update some misnamed conditional compilation
2015-01-18 11:17:00 -06:00
babe9cf08e
Network: Add an IPv4 configuration option. Hardcoded to =y for now, but I would like to be able to select IPv4 and/or IPv6 in the future
2015-01-14 10:51:09 -06:00
a40979407f
Tiva Timer: Revert the previous change. Thre is a better way to handler timerout interrupts.
...
Removed setting of the initial timer interval load value (or, rather, it is always set to zero for a free-running timer). Also, do not unconditional enable the timer out interrupt. The timerout interrupt is not not enabled until tiva_timer32_setinterval() is called.
2015-01-14 07:33:59 -06:00
99dd9d9c19
Update README
2015-01-13 16:17:07 -06:00
3efd127e64
Timer Timer: Timer driver now initializes without complaints. Need a test driver of some kind to make more testing progress.
2015-01-13 11:49:00 -06:00
9c3dce06e1
DK-TM3C129X Timer: Add timer initialization logic to the board bring-up
2015-01-13 11:10:35 -06:00
64530008ba
Tive System Control: Add logic to configure the alternatie clock source (ALTCLK). Needed by the Tiva timer module
2015-01-09 14:10:31 -06:00
1446092e95
Update README
2015-01-07 06:23:24 -06:00
9dd82a5f08
DK-TM42129X: Support for the TMP100 temperature sensor is enabled by default in the NSH configuration
2015-01-06 13:23:35 -06:00
beaf4afdd4
DK-TM4C129X: Add logic to initialize the TMP-100 temperature sensor driver at startup
2015-01-06 13:23:02 -06:00
383a47fb28
DK-TM4C129X: Add support for on-board TMP100 temperature sensor
2015-01-06 11:50:56 -06:00
9f2803737d
DK-TM4C129X: Enable I2C6 and the I2C tool in the default configuration
2015-01-05 13:40:55 -06:00
67bcdf5514
DK-TM4C129X: The network monitor is no enabled by default in NSH configuration
2015-01-05 12:09:33 -06:00
5752f301de
Tiva Ethernet: Add support for PHY interrupts
2015-01-03 13:16:26 -06:00
bc1c73244b
DK-TM4C129X: Ethernet networking is now enabled by default in the NSH configuration
2015-01-03 10:27:04 -06:00
c47152b2e5
DK-TM4C129X: Fix RAM size in defconfig files
2015-01-03 09:44:02 -06:00
0e29fcc736
DK_TM4C129X: Add more GPIO pin definitions
2015-01-01 14:16:05 -06:00
3ff87bfda0
DK_TM4C129X: Add some GPIO pin definitions
2015-01-01 13:55:53 -06:00
78d0d911b3
TM4C129X Ethernet: Add logic to get pre-programmed MAC address from user FLASH registers
2015-01-01 12:28:46 -06:00
aef65efd38
Tiva Ethernet: Update Ethernet intializaiton logic. Still things to be done
2015-01-01 07:55:15 -06:00
ad4de38641
Refresh configuration
2014-12-31 07:32:47 -06:00
ce4c433037
Refresh Configuration
2014-12-26 09:33:20 -06:00
541b26f0ff
Cosmet updates to comments and README files
2014-12-24 08:15:21 -06:00
7794c79815
DK-TM4C129X: Fix sense of LEDs; active high. Also GPIO for blue and green reversed
2014-12-22 17:41:04 -06:00
dd89bd2233
TM4C129X: A small step toward understanding new Tiva clocking
2014-12-22 09:30:41 -06:00
fe12140f94
Tiva SSI and board configurations: hange negative Tiva logic CONFIG_SSIx_DISABLE to positive logic CONFIG_TIVA_SSIx. Add support for SSI2 and SSI3
2014-12-21 15:23:37 -06:00
8aa9f27925
Tiva: Add a configuration setting to better distinguish TM4C123 and 129 families. Reanem tm4c_syscontrol.h to tm4c123_syscontrol.h; rename tm4c129x_syscontrol.h to tm4c129_syscontrol.h
2014-12-20 08:38:11 -06:00
93bcd3e03e
TM4C129X: Add custom system control header file (incomplete)
2014-12-19 12:12:52 -06:00
67e6b760e8
Add some OpenOCD scripts for some TI Tiva boards
2014-12-18 16:54:48 -06:00
6cc9716d55
Tiva: Fix configuration logic for IRQ interrupts. The various parts support varying numbers of GPIO blocks and with varying capabilities to support interrupts on the pins of different GPIO blocks
2014-12-18 15:33:52 -06:00
a5fcd71af0
Tiva: Change negative logic CONFIG_TIVA_DISABLE_GPIOx_IRQS to positive logic CONFIG_TIVA_GPIOx_IRQS
2014-12-18 15:19:16 -06:00
0c698a7121
DK-TM4C129X: Add support for buttons
2014-12-18 11:51:30 -06:00
c79bc06988
DK-TM4C129X: Add LED support
2014-12-18 10:20:34 -06:00
55a3c57399
DK-TM4C129X: Fixes to get clean build. Logic is still not complete, however
2014-12-18 08:24:24 -06:00
2554b5c89a
DK-TM4C129X: Switch to Windows/Cygwin + CodeSourcery
2014-12-17 07:00:22 -06:00
09b16e3819
Remove packaging indications for TM4C129 configuration variables
2014-12-16 16:22:52 -06:00
18c61b6e64
Add TM4C129XNCZAD and TM4C1294NCPDT to the Tiva configuration system
2014-12-16 16:02:21 -06:00
30990b43ef
Remove EXPERIMENTAL dependency from the Traveler game. It is basically functional now.
2014-12-16 15:27:36 -06:00
Gregory Nutt