32d2a4c548
All Ethernet drivers (again): Missed one place where arp_out() is called and neighber_out() needs to be called
2015-01-21 11:36:33 -06:00
1ad73c52b1
Networking: Modify all Ethernet drivers: Do neighbor look-up on all outgoing IPv6 packs in order to properly set the destination link layer address.
2015-01-20 15:52:25 -06:00
a53ae59284
Networking: Add missing raw/packet socket support to all Ethernet drivers
2015-01-20 15:14:29 -06:00
92f440c20c
Ethernet drivers: Use IFF_IS_IPv4 macro. Cannot rely on the EtherType being set correctly.
2015-01-20 06:26:14 -06:00
278c485229
Networking: All Ethernet drivers: Call ipv6_input if IPv6 is enabled and an IPv6 packet is received
2015-01-15 09:31:23 -06:00
89538ac4a2
- Rename devif_input() ipv4_input()
...
- Copy net/devif/devif_input.c to ipv6_input.c. Remove all IPv4-specific logic.
- Rename net/devif/devif_input.c to ipv4_input.c. Remove all IPv6-specific logic
- Split IPv4 header structure out as net_ipv4hdr_s from net_iphdr_s
2015-01-15 08:03:56 -06:00
2f4aa0bde7
Networking: Condition certain ARP logic on CONFIG_NET_ARP in all Ethernet drivers
2015-01-15 07:07:39 -06:00
63526fb1ef
Rename CONFIG_NET_BUFSIZE to CONFIG_NET_ETH_MTU is all MCU Ethernet drivers
2014-11-16 08:10:06 -06:00
388ef8db1a
Netwoek: Ada a parameter to netdev_register() to indicate the link protocol supported by the driver. Use this value to replace some logic commited yesterday
2014-11-15 08:22:51 -06:00
6c9f325e1e
Move selection for CONFIG_SERIAL_TERMIOS out of MCU Kconfigs to common drivers/serial/Kconfig. Add CONFIG_ARCH_HAVE_SERIAL_TERMIOS to indicate if an MCU supports TERMIOS
2014-10-27 11:31:16 -06:00
4929b61f7c
For PIC32MX7, DEVCFG0 bit 2 must be set
2014-10-09 14:03:54 -06:00
7b310711a1
Update everything under nuttx/arch to use the corrected syslog interfaces
2014-10-08 12:48:47 -06:00
56dc80cf59
The 'make export' target needs to bundle up the user C startup file (crt0), not the kernel head object
2014-09-04 13:31:34 -06:00
64ab35b399
There used to be two ways to pass parameters to new tasks, depending upon the configuration: Either (1) argv[] as created as an array with each string strdup'ed. Or (1) argv[] array and strings were created on the stack before the new task was started. Now, there is only one way, way (1). Way (2) might be slightly more compact, but this is not worth carry the complexity of two different ways of doing the same thing.
2014-09-01 15:39:34 -06:00
205260d5e2
Reanem kzalloc to kmm_zalloc for consistency
2014-08-31 17:34:44 -06:00
1780810d3d
Rename kmalloc to kmm_malloc for consistency
2014-08-31 17:26:36 -06:00
54fa3b0b59
Rename kfree to kmm_free for consistency with other naming conventions
2014-08-31 17:04:02 -06:00
9aca0c1c84
Rename kumalloc to kumm_malloc and kuzalloc to kumm_zalloc for consistency with other naming
2014-08-31 16:24:24 -06:00
e3ff0689bb
Rename CONFIG_NUTTX_KERNEL to CONFIG_BUILD_PROTECTED; Partially integrate new CONFIG_BUILD_KERNEL
2014-08-29 14:47:22 -06:00
45f3328247
Fix an error introduced into ALL implmentations of interrupt dispatch logic
2014-08-28 08:41:57 -06:00
dfdaeb31ac
Add address environment support to ALL implementatins of up_release_pending()
2014-08-28 08:10:19 -06:00
9598412386
Add address environment support to ALL implementatins of up_reprioritize_rtr()
2014-08-28 07:54:07 -06:00
7420468daa
MIPS: Move address environment switch from the task switchers to the interrupt handler. That may save doing the action multiple times per interrupt
2014-08-28 07:16:14 -06:00
9bc9d2d86d
Add ADDRENV support to ALL implmentations of _exit()
2014-08-27 16:31:02 -06:00
4d24c48901
Add ADDRENV support to ALL implementations of up_unblock_task()
2014-08-27 16:15:46 -06:00
57c066b7a3
Add ADDRENV support to all implementations of up_block_task()
2014-08-27 15:36:52 -06:00
ad9b3f8ab8
wdog.h does not contain any application interface, only internal OS interface. Further, it is non-standard. Move wdog.h from include/ to include/nuttx. For the same reason, move the description of the watchdog timer interfaces from the Users Guide to the Porting Guide.
2014-08-21 11:16:55 -06:00
e1769b22f1
Remove os_internal.h it has been replace by several new header files under sched/. There have been some sneak inclusion paths via os_internal.h, so expect a few compilation errors for some architectures
2014-08-08 18:39:28 -06:00
d798dd37a7
Replace os_internal.h with sched/sched.h in files that actually reference something in sched.h
2014-08-08 17:53:55 -06:00
23a334c066
Move task control files from sched/ to sched/task
2014-08-08 16:44:08 -06:00
d4b56eb3cc
Move clock functions from sched/ to sched/clock
2014-08-08 14:43:02 -06:00
c9661ad5a7
Change all time conversions. Yech. New timer units in microseconds breaks all existing logic that used milliseconds in the conversions. Something likely got broken doing this, probably because I confused a MSEC2TICK conversion with a TICK2MSEC conversion. Also, the tickless OS no appears fully functional and passes the OS test on the simulator with no errors
2014-08-07 18:00:38 -06:00
736d3c169a
Rename up_timerinit() to up_timer_initailize(); Add prototypes for candidate interfaces for the tickless OS; Don't build existing timer initialization logic if CONFIG_SCHED_TICKLESS is defined.
2014-08-06 16:26:01 -06:00
60246e613b
NET: emoved all includes of uip.h; added includes of ip.h wherever needed. Tried to fix problems of the now missing sneak inclusions because uip.h was removed. There are probably a few of these that were missed.
2014-07-04 19:13:08 -06:00
0bb153b8cb
Remove all inclusion of uip.h
2014-07-04 16:58:22 -06:00
cce35ce975
NET: More renaming
2014-07-04 15:40:49 -06:00
400edda109
NET: Rename XYZ_uiptxpoll to just XYZ_txpoll
2014-07-01 18:41:08 -06:00
b0c1b7ef47
Rename uip_poll->devif_poll and uip_timer->devif_timer
2014-06-30 18:40:41 -06:00
da7379ed18
Rename uip_input to devif_input
2014-06-30 18:11:17 -06:00
fce2a79abd
Rename uip_driver_s net_driver_s
2014-06-27 16:48:12 -06:00
621097b6c8
Rename ip_eth_hdr to eth_hdr_s
2014-06-25 09:57:52 -06:00
5d1f8180d4
Move the remaining files from include/nuttx/net/uip to include/nuttx/net; Rename *_internal.h header files in net/ to just *.h
2014-06-24 10:14:15 -06:00
37646044ac
Move include/nuttx/net/uip/uip-arch.h to include/nuttx/net/netdev.h
2014-06-24 09:28:44 -06:00
626469e30c
Move include/nuttx/net/uipopt.h to include/nuttx/net/netconfig.h
2014-06-24 08:53:28 -06:00
90e4b55e0c
Move include/nuttx/net/uip/uip-arch.h to include/nuttx/net/arp.h; rename all uip_arp_ functions to arp_
2014-05-30 12:13:06 -06:00
2abe0dd6dd
Change all variadic macros to C99 style
2014-05-22 09:01:51 -06:00
11c29aebbc
Make sure that all references to up_prioritize_irq() are conditioned on CONFIG_ARCH_IRQPRIO. Noted by Make Smith
2014-05-20 17:48:39 -06:00
7594d8b8cf
Add serial method so that lower half driver can provide RX flow control information. From Jussi Kivilinna
2014-05-08 09:00:33 -06:00
40972de8d7
Fix spelling, only one t in exiting
2014-04-27 15:49:38 -06:00
f8024cf409
More trailing whilespace removal
2014-04-13 16:22:22 -06:00
Gregory Nutt