Commit Graph

257 Commits

Author SHA1 Message Date
luojun1234 ff3733b5b5 Support fragmentation and reassembly
Signed-off-by: luojun1 <luojun1@xiaomi.com>
2023-01-17 14:01:37 +08:00
Xiang Xiao a851ad84c3 net: consistent the net sem wait naming conversion
to prepare the new mutex wait function

Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
2023-01-15 12:31:30 -03:00
chao an 8a63d29c6e net/devif_poll: optimize device buffer alloc in txpoll
Allocate the device buffer only if the protocol really need to send data.
not all protocols require the driver to prepare additional iob before
sending, especially UDP, each iob reserves l2/l3 header in advance
after prepare write buffer, net device could reuse this entry to send directly

Signed-off-by: chao an <anchao@xiaomi.com>
2023-01-13 16:41:10 +08:00
chao an 0cbbbb9215 net/devif: reuse devif_send() for can/pkt/icmp stack
Signed-off-by: chao an <anchao@xiaomi.com>
2023-01-13 16:41:10 +08:00
Zhe Weng 6222ad5764 Revert "net: downgrade iob priority of input/udp/icmp to avoid blocking devif"
This reverts commit d87620abc9.
2023-01-12 01:56:18 +08:00
Zhe Weng d87620abc9 net: downgrade iob priority of input/udp/icmp to avoid blocking devif
When trying to use iperf2, we found it comsumes all the IOB when sending UDP packets, then devif_poll has no IOB to send the packet out, so speed drops to 0 and never recovers.

Signed-off-by: Zhe Weng <wengzhe@xiaomi.com>
2023-01-05 22:25:19 +08:00
chao an 34d2cde8a8 net/l2/l3/l4: add support of iob offload
1. Add new config CONFIG_NET_LL_GUARDSIZE to isolation of l2 stack,
   which will benefit l3(IP) layer for multi-MAC(l2) implementation,
   especially in some NICs such as celluler net driver.

new configuration options: CONFIG_NET_LL_GUARDSIZE

CONFIG_NET_LL_GUARDSIZE will reserved l2 buffer header size of
network buffer to isolate the L2/L3 (MAC/IP) data on network layer,
which will be beneficial to L3 network layer protocol transparent
transmission and forwarding

------------------------------------------------------------
Layout of frist iob entry:

        iob_data (aligned by CONFIG_IOB_ALIGNMENT)
            |
            |                  io_offset(CONFIG_NET_LL_GUARDSIZE)
            |                                |
            -------------------------------------------------
      iob   |            Reserved            |    io_len    |
            -------------------------------------------------

-------------------------------------------------------------
Layout of different NICs implementation:

        iob_data (aligned by CONFIG_IOB_ALIGNMENT)
            |
            |                 io_offset(CONFIG_NET_LL_GUARDSIZE)
            |                                |
            -------------------------------------------------
 Ethernet   |       Reserved    | ETH_HDRLEN |    io_len    |
            ---------------------------------|---------------
 8021Q      |   Reserved  | ETH_8021Q_HDRLEN |    io_len    |
            ---------------------------------|---------------
 ipforward  |            Reserved            |    io_len    |
            -------------------------------------------------

--------------------------------------------------------------------

2. Support iob offload to l2 driver to avoid unnecessary memory copy

Support send/receive iob vectors directly between the NICs and l3/l4
stack to avoid unnecessary memory copies, especially on hardware that
supports Scatter/gather, which can greatly improve performance.

new interface to support iob offload:

  ------------------------------------------
  |    IOB version     |     original      |
  |----------------------------------------|
  |  devif_iob_poll()  |   devif_poll()    |
  |       ...          |       ...         |
  ------------------------------------------

--------------------------------------------------------------------

1> NIC hardware support Scatter/gather transfer

TX:

                tcp_poll()/udp_poll()/pkt_poll()/...(l3|l4)
                           /              \
                          /                \
devif_poll_[l3|l4]_connections()     devif_iob_send() (nocopy:udp/icmp/...)
           /                                   \      (copy:tcp)
          /                                     \
  devif_iob_poll("NIC"_txpoll)                callback() // "NIC"_txpoll
                                                  |
                            dev->d_iob:           |
                                                ---------------         ---------------
                             io_data       iob1 |  |          |    iob3 |  |          |
                                    \           ---------------         ---------------
                                  ---------------  |       --------------- |
                             iob0 |  |          |  |  iob2 |  |          | |
                                  ---------------  |       --------------- |
                                     \             |          /           /
                                        \          |       /           /
                                   ----------------------------------------------
                    NICs io vector |    |    |    |    |    |    |    |    |    |
                                   ----------------------------------------------

RX:

  [tcp|udp|icmp|...]ipv[4|6]_data_handler()(iob_concat/append to readahead)
                    |
                    |
      [tcp|udp|icmp|...]_ipv[4|6]_in()/...
                    |
                    |
          pkt/ipv[4/6]_input()/...
                    |
                    |
     NICs io vector receive(iov_base to each iobs)

--------------------------------------------------------------------

2> CONFIG_IOB_BUFSIZE is greater than MTU:

TX:

"(CONFIG_IOB_BUFSIZE) > (MAX_NETDEV_PKTSIZE + CONFIG_NET_GUARDSIZE + CONFIG_NET_LL_GUARDSIZE)"

                tcp_poll()/udp_poll()/pkt_poll()/...(l3|l4)
                           /              \
                          /                \
devif_poll_[l3|l4]_connections()     devif_iob_send() (nocopy:udp/icmp/...)
           /                                   \      (copy:tcp)
          /                                     \
  devif_iob_poll("NIC"_txpoll)                callback() // "NIC"_txpoll
                                                  |
                                             "NIC"_send()
                          (dev->d_iob->io_data[CONFIG_NET_LL_GUARDSIZE - NET_LL_HDRLEN(dev)])

RX:

  [tcp|udp|icmp|...]ipv[4|6]_data_handler()(iob_concat/append to readahead)
                    |
                    |
      [tcp|udp|icmp|...]_ipv[4|6]_in()/...
                    |
                    |
          pkt/ipv[4/6]_input()/...
                    |
                    |
     NICs io vector receive(iov_base to io_data)

--------------------------------------------------------------------

3> Compatible with all old flat buffer NICs

TX:
                tcp_poll()/udp_poll()/pkt_poll()/...(l3|l4)
                           /              \
                          /                \
devif_poll_[l3|l4]_connections()     devif_iob_send() (nocopy:udp/icmp/...)
           /                                   \      (copy:tcp)
          /                                     \
  devif_iob_poll(devif_poll_callback())  devif_poll_callback() /* new interface, gather iobs to flat buffer */
       /                                           \
      /                                             \
 devif_poll("NIC"_txpoll)                     "NIC"_send()(dev->d_buf)

RX:

  [tcp|udp|icmp|...]ipv[4|6]_data_handler()(iob_concat/append to readahead)
                    |
                    |
      [tcp|udp|icmp|...]_ipv[4|6]_in()/...
                    |
                    |
               netdev_input()  /* new interface, Scatter/gather flat/iob buffer */
                    |
                    |
          pkt/ipv[4|6]_input()/...
                    |
                    |
    NICs io vector receive(Orignal flat buffer)

3. Iperf passthrough on NuttX simulator:

  -------------------------------------------------
  |  Protocol      | Server | Client |            |
  |-----------------------------------------------|
  |  TCP           |  813   |   834  |  Mbits/sec |
  |  TCP(Offload)  | 1720   |  1100  |  Mbits/sec |
  |  UDP           |   22   |   757  |  Mbits/sec |
  |  UDP(Offload)  |   25   |  1250  |  Mbits/sec |
  -------------------------------------------------

Signed-off-by: chao an <anchao@xiaomi.com>
2022-12-03 11:47:04 +08:00
Zhe Weng 025430a964 net/icmpv6: Fix icmpv6_reply function
Fix icmpv6_reply logic broken by commit 48311cc61f and 391b501639.

- 48311cc61f "Fix unaligned memory access when creating ICMP Port Unreachable messages"
  - It removed `htonl` function outside `data`, then the byte order may be wrong, so add `htons` back.
- 391b501639 "net: extract l3 header build code into new functions"
  - It mis-removed the `memmove`, and the icmpv6 has no payload copied after this commit.

Signed-off-by: Zhe Weng <wengzhe@xiaomi.com>
2022-12-02 15:26:45 +08:00
liyi 391b501639 net: extract l3 header build code into new functions
Signed-off-by: liyi <liyi25@xiaomi.com>
2022-11-29 18:36:15 +08:00
Zhe Weng 869c93638d net/icmpv6: Fix `ipv6->len` in icmpv6_reply
The `ipv6->len` is the length excluding the IPv6 header, so need to be `dev->d_len - IPv6_HDRLEN`.

Signed-off-by: Zhe Weng <wengzhe@xiaomi.com>
2022-11-24 23:19:10 +08:00
Zhe Weng a26ea96f3b net/icmpv6: Fix `datalen` in icmpv6_reply
The `datalen` indicates the whole len of original packet, which will become the payload inside icmpv6 packet.

Using `datalen = (ipv4->len[0] << 8) + ipv4->len[1]` in icmp_reply is correct, because it includes IPv4 header, but when coming to IPv6, the `len` does not include the header, so we need to add it back.

Signed-off-by: Zhe Weng <wengzhe@xiaomi.com>
2022-11-24 23:19:10 +08:00
Zhe Weng 233974b327 net/icmpv6: Fix icmpv6 checksum calculation in icmpv6_reply
The second param of icmpv6_chksum is `iplen`, which indicates `The size of the IPv6 header`.

Signed-off-by: Zhe Weng <wengzhe@xiaomi.com>
2022-11-24 23:19:10 +08:00
chao an 873023f89b net/icmp[v6]: destroy nxsem properly
Signed-off-by: chao an <anchao@xiaomi.com>
2022-11-21 01:15:48 +08:00
chao an 6898409d04 net/icmp[v6]: ICMP[v6]_NO_STACK should not depends on NET_IPv4/6
Signed-off-by: chao an <anchao@xiaomi.com>
2022-11-20 08:16:20 -03:00
chao an a8d3286258 net: move device buffer define to common header
Signed-off-by: chao an <anchao@xiaomi.com>
2022-10-28 00:32:16 -04:00
anjiahao 5724c6b2e4 sem:remove sem default protocl
Signed-off-by: anjiahao <anjiahao@xiaomi.com>
2022-10-22 14:50:48 +08:00
anjiahao d1d46335df Replace nxsem API when used as a lock with nxmutex API
Signed-off-by: anjiahao <anjiahao@xiaomi.com>
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
2022-10-17 15:59:46 +09:00
Xiang Xiao 40ef5bc6db libc: Move queue.h from include to include/nuttx
to avoid the conflict with libuv's queue.h

Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
2022-09-26 08:04:58 +02:00
wangbowen6 344c8be049 poll: add poll_notify() api and call it in all drivers
Signed-off-by: wangbowen6 <wangbowen6@xiaomi.com>
2022-09-26 12:06:32 +08:00
Xiang Xiao e0bb281e7a net: Align the prototype of sock_intf_s::si_ioctl with file_operations::ioctl
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
2022-09-06 22:46:37 +08:00
chao.an 162fcd10ca net: cleanup pvconn reference to avoid confuse
More reference:
https://github.com/apache/incubator-nuttx/pull/5252
https://github.com/apache/incubator-nuttx/pull/5434

Signed-off-by: chao.an <anchao@xiaomi.com>
2022-08-26 20:58:11 +08:00
chao.an 77a99acc98 net/icmpv6: fix build break "duplicate macro parameter"
Error: net/icmpv6/icmpv6.h:442:33: error: duplicate macro parameter "d"
 #  define icmpv6_setaddresses(d,d,p,p) (0)

Signed-off-by: chao.an <anchao@xiaomi.com>
2022-08-26 10:00:22 +02:00
zhanghongyu cc421e43e4 icmpv6: add NTOHL when parse ICMPV6 option MTU
Signed-off-by: zhanghongyu <zhanghongyu@xiaomi.com>
Signed-off-by: chao.an <anchao@xiaomi.com>
2022-08-26 10:00:22 +02:00
luojun1 00cf3e559d update IPv6 NIC parameters unconditionally when ICMPv6 RA is received
Signed-off-by: luojun1 <luojun1@xiaomi.com>
Signed-off-by: chao.an <anchao@xiaomi.com>
2022-08-26 10:00:22 +02:00
luojun1 7c2986bb34 finetune the RA parsing procedure
Signed-off-by: luojun1 <luojun1@xiaomi.com>
Signed-off-by: chao.an <anchao@xiaomi.com>
2022-08-26 10:00:22 +02:00
Huang Qi e4e3208180 Replace all strncpy with strlcpy for safety
Signed-off-by: Huang Qi <huangqi3@xiaomi.com>
2022-08-25 13:38:36 +08:00
Xiang Xiao ba9486de4a iob: Remove iob_user_e enum and related code
since it is impossible to track producer and consumer
correctly if TCP/IP stack pass IOB directly to netdev

Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
2022-08-15 08:41:20 +03:00
chao.an 8ae8c10954 net/poll: fix race condition if connect free before poll teardown
Net poll teardown is not protected by net lock, if the conn is released
before teardown, the assertion failure will be triggered during free dev
callback, this patch will add the net lock around net poll teardown to
fix race condition

nuttx/libs/libc/assert/lib_assert.c:36
nuttx/net/devif/devif_callback.c:85
nuttx/net/tcp/tcp_netpoll.c:405
nuttx/fs/vfs/fs_poll.c:244
nuttx/fs/vfs/fs_poll.c:500

Signed-off-by: chao.an <anchao@xiaomi.com>
2022-07-09 19:11:42 +08:00
Xiang Xiao abc72ad128 net: Ensure sendmsg and sendfile return -EAGAIN in case of timeout
instead of -ETIMEOUT, as specify here:
https://pubs.opengroup.org/onlinepubs/009604599/functions/sendmsg.html
https://man7.org/linux/man-pages/man2/sendfile.2.html

Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
2022-06-28 06:19:13 +03:00
zhanghongyu c50d7e174f net: tcp/udp/icmp/icmpv6 add FIONSPACE support
Signed-off-by: zhanghongyu <zhanghongyu@xiaomi.com>
2022-04-02 13:39:38 +08:00
Xiang Xiao 7598070508 net: Remove the unnecessary initialization code
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
2022-03-12 19:24:17 +02:00
chao.an 3fce144aeb net/inet: move recv/send timeout into socket_conn_s
Signed-off-by: chao.an <anchao@xiaomi.com>
2022-02-10 15:04:33 -03:00
chao.an 99cde13a11 net/inet: move socket flags into socket_conn_s
Signed-off-by: chao.an <anchao@xiaomi.com>
2022-02-10 15:04:33 -03:00
chao.an e02711e114 net/icmpv6: replace the common connect prologue
Signed-off-by: chao.an <anchao@xiaomi.com>
2022-02-10 15:04:33 -03:00
Petro Karashchenko 08043fb5bc net: unify FAR keyword usage for all net buffer memory mapped buffers
Signed-off-by: Petro Karashchenko <petro.karashchenko@gmail.com>
2022-01-20 01:42:56 +08:00
Petro Karashchenko 9551de7115 net: use HTONS, NTOHS, HTONL, NTOHL macro in kernel code
Signed-off-by: Petro Karashchenko <petro.karashchenko@gmail.com>
2022-01-18 10:59:47 +01:00
chao.an 0d7f12c489 net/icmp: fix build break if enable NET_ALLOC_CONNS
Signed-off-by: chao.an <anchao@xiaomi.com>
2022-01-17 13:34:49 +08:00
chao.an a1bf9ca88b net/icmp[v6]: add support for CONFIG_NET_ALLOC_CONNS
Signed-off-by: chao.an <anchao@xiaomi.com>
2022-01-04 14:36:07 +08:00
Norman Rasmussen 48311cc61f Fix unaligned memory access when creating ICMP Port Unreachable messages
commit 3b69d09c80 corrected the
unreachable handling for net/udp/icmp but introduced an unaligned store.
This splits the uint32_t data field into a two element uint16_t data
field to avoid the unaligned store.
2021-12-28 03:51:53 -06:00
chao.an 3b69d09c80 net/udp/icmp: correct the unreadchable handling
Reference RFC1122:
https://datatracker.ietf.org/doc/html/rfc1122
----------------------------------------------

4.1.3  SPECIFIC ISSUES

  4.1.3.1  Ports

    If a datagram arrives addressed to a UDP port for which
    there is no pending LISTEN call, UDP SHOULD send an ICMP
    Port Unreachable message.

Signed-off-by: chao.an <anchao@xiaomi.com>
2021-11-26 08:47:54 -06:00
Alexander Lunev 1e25602678 net/can,icmp,icmpv6,tcp,tcp_timer,udp: device should poll only those connections that are bound to the device.
tcp_timer: eliminated false decrements of conn->timer in case of multiple network adapters.
The false timer decrements sometimes provoked TCP spurious retransmissions due to premature timeouts.
2021-10-11 23:09:00 -07:00
Alexander Lunev 36fbedcbfc net/devif/devif_callback.c: corrected the connection event list to work as FIFO instead of LIFO.
In case of enabled packet forwarding mode, packets were forwarded in a reverse order
because of LIFO behavior of the connection event list.
The issue exposed only during high network traffic. Thus the event list started to grow
that resulted in changing the order of packets inside of groups of several packets
like the following: 3, 2, 1, 6, 5, 4, 8, 7 etc.

Remarks concerning the connection event list implementation:
* Now the queue (list) is FIFO as it should be.
* The list is singly linked.
* The list has a head pointer (inside of outer net_driver_s structure),
  and a tail pointer is added into outer net_driver_s structure.
* The list item is devif_callback_s structure.
  It still has two pointers to two different list chains (*nxtconn and *nxtdev).
* As before the first argument (*dev) of the list functions can be NULL,
  while the other argument (*list) is effective (not NULL).
* An extra (*tail) argument is added to devif_callback_alloc()
  and devif_conn_callback_free() functions.
* devif_callback_alloc() time complexity is O(1) (i.e. O(n) to fill the whole list).
* devif_callback_free() time complexity is O(n) (i.e. O(n^2) to empty the whole list).
* devif_conn_event() time complexity is O(n).
2021-09-18 21:01:39 -05:00
Gregory Nutt 04c9079954 Back in 2007, an early network implementation was developed for NuttX. This early development was inspired largely by uIP 1.0 and recognition of that was noted in the then BSD license headers. Over the next 14 years, a new, much more advanced, original network was developed for NuttX. However, some references to Adam Dunkels were still present in the file headers.
Because of this, it will take some time to detangle the licensing under net/.  Many new features, original features were added to the NuttX network.  Clearly, any references to Adam Dunkels in the files that implement these new features that have no counterpart in uIP 1.0 are errors.

This PR removes the references and converts the license headers to Apache 2.0 where possible.  The affected files include only (1) the implementation of IPv6 (including neighbor support under ICMPv6) and (2) Raw sockets.  Neither of these features are present in uIP 1.0 and the licenses can be freely updated.
2021-09-17 21:49:44 -05:00
Xiang Xiao 5b2a17b892 Include assert.h in necessary place
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
2021-06-08 13:06:08 -07:00
chao.an 39245f63fe net/icmp: fix race condition in icmp recvmsg
Signed-off-by: chao.an <anchao@xiaomi.com>
2021-06-07 22:17:50 -05:00
chao.an ae613446c8 net/icmp: add nonblocking support
Signed-off-by: chao.an <anchao@xiaomi.com>
2021-06-07 22:17:50 -05:00
chao.an 9c1fb4c04b net/icmp: consume the data length to avoid duplicate packet
Signed-off-by: chao.an <anchao@xiaomi.com>
2021-06-07 22:17:50 -05:00
chao.an b0ac97adab net/icmp: fix invalid condition comparison
up_assert: Assertion failed at file:
  icmp/icmp_recvmsg.c line: 175 task: net_tasklet

Signed-off-by: chao.an <anchao@xiaomi.com>
2021-06-07 22:17:50 -05:00
Gustavo Henrique Nihei 330eff36d7 sourcefiles: Fix relative path in file header 2021-03-09 23:18:28 +08:00
Peter Bee e223f60c09 net/socket: move si_send/recv into sendmsg/recvmsg
Implement si_send/sendto/recvfrom with si_sendmsg/recvmsg, instead of
the other way round.

Change-Id: I7b858556996e0862df22807a6edf6d7cfe6518fc
Signed-off-by: Peter Bee <bijunda1@xiaomi.com>
2021-03-05 04:46:13 -08:00