David Sidrane
|
11d1b2e636
|
Typo mmcsd/mmcsd_sdio.c
|
2017-02-13 13:24:47 -10:00 |
|
Marc Rechté
|
d501ffc563
|
Kinetis SDHC driver fixes.
|
2017-02-09 11:28:30 -06:00 |
|
Alan Carvalho de Assis
|
248d5d3185
|
MMC/SD SDIO: Some drivers need to start DMA before sending CMD24 and some AFTER
|
2017-02-09 11:13:05 -06:00 |
|
Gregory Nutt
|
0df1c556dc
|
drivers/lcd: ssd1306_configspi() must have global scope.
|
2017-02-09 07:45:25 -06:00 |
|
Wolfgang Reißnegger
|
cfe7c4012e
|
USBMSC: Always set LUN readonly flag.
|
2017-02-08 17:17:19 -08:00 |
|
Gregory Nutt
|
9f859774a1
|
setvbuf: Add support for configuration of line buffering.
|
2017-02-08 11:28:24 -06:00 |
|
Gregory Nutt
|
764f503150
|
Remove duplicate setting for SDIO_DMA from drivers/mmcsd/Kconfig
|
2017-02-06 13:16:52 -06:00 |
|
Gregory Nutt
|
3dbdb3bb31
|
CONFIG_SDIO_DMA: Was been defined in several low-level architecute Kconfig files, but used at the highest levels in the code. Both are bad and both are fixed with this commit
|
2017-01-31 11:52:00 -06:00 |
|
Gregory Nutt
|
2a4791f4ee
|
Removed dmasupported() method from the SDIO interface. That is now a bit in the cpapability set.
|
2017-01-31 09:51:15 -06:00 |
|
Gregory Nutt
|
9ac00a355f
|
Add capabilities() method to SDIO interface. Remove CONFIG_SDIO_WIDTH_D1_ONLY. That should not be a global propertie, but rather a capability/limitation of single slot when there may be multiple slots.
|
2017-01-31 09:16:01 -06:00 |
|
Gregory Nutt
|
a70ea9d3bc
|
Typos withim mtd/ with Macronix MX25L. In NuttX/drivers/mtd/Make.defs letters X between M and 25 are missing. Noted by Oleg Evseev.
|
2017-01-30 07:26:38 -06:00 |
|
Alan Carvalho de Assis
|
c482437325
|
MMCSD_SDIO: Only wait for card ejected if card detection is supported
|
2017-01-26 07:44:17 -06:00 |
|
Gregory Nutt
|
ba2b345990
|
Remove a few remaining use of the obsolteted 'Compilation Switches' program section
|
2017-01-22 08:57:18 -06:00 |
|
Gregory Nutt
|
5e0c18b535
|
Merged in david_s5/nuttx/upstream_2_greg_ramtron (pull request #198)
Adding missing CONFIG_ prefix
|
2017-01-20 20:48:22 +00:00 |
|
David Sidrane
|
ca895b978b
|
Adding missing CONFIG_ prefix
|
2017-01-20 10:45:50 -10:00 |
|
Gregory Nutt
|
08c001196b
|
drivers/: Remove all explicit use of 'hidden' macro _info. Code must never use this directly. Code must always use a debug macro such as info which is basic on _info but can be appropriately filtered.
|
2017-01-15 13:00:50 -06:00 |
|
Gregory Nutt
|
2d9668fbd2
|
Fix a typo in a comment
|
2017-01-12 16:24:41 -06:00 |
|
Aleksandr Vyhovanec
|
bf528f2071
|
packed_struct replaced by begin_packed_struct and end_packed_struct
|
2017-01-09 14:17:49 +03:00 |
|
David Sidrane
|
548108764a
|
BugFix:uart_ops_s portion of cdcacm will not be initalized with correct functions if CONFIG_SERIAL_DMA is lit.
This fixes the issses in a C99 compatible way
|
2016-12-17 04:29:41 -10:00 |
|
Gregory Nutt
|
4795d58e03
|
Back out most of 46dbbe837e. The order is correct -- or, rather, the order is the same as the order that response data is provided. Change the order will break all other drivers.
|
2016-12-15 07:16:24 -06:00 |
|
Gregory Nutt
|
ca92ecafa7
|
MMC/SD: Format changed from %d to %lu. Must cast argument to unsigned long to avoid crash on 64-bit machine.
|
2016-12-14 17:44:12 -06:00 |
|
Gregory Nutt
|
f4f32bc740
|
MMC/SD SDIO (again): This is really an endian-ness issue. Behavior should be different on big- vs little-endian machines.
|
2016-12-14 17:04:27 -06:00 |
|
Alan Carvalho de Assis
|
3c4a8d05b0
|
MMC/SD SDIO driver: Change the endianess order to read the return of long response command
|
2016-12-14 14:17:52 -06:00 |
|
Gregory Nutt
|
f063e4c5ac
|
Remove Calypso architecture support and support for Calypso SERCOMM driver.
|
2016-12-13 18:35:52 -06:00 |
|
Gregory Nutt
|
d9e040d76b
|
Remove all Calypso board configurations
|
2016-12-13 18:24:49 -06:00 |
|
Gong Darcy
|
44b7975a5e
|
SSD1306: Fix errors in SPI mode configuration
|
2016-12-04 10:07:46 -06:00 |
|
Gregory Nutt
|
7467329a98
|
Eliminate CONFIG_NO_NOINTS. Lots of files changed -> lots of testing needed.
|
2016-12-03 16:28:19 -06:00 |
|
Gregory Nutt
|
ad3897531f
|
C5471 Ethernet now supports CONFIG_NET_NOINTS
|
2016-12-03 12:17:55 -06:00 |
|
Gregory Nutt
|
43459fe75e
|
DM09x0 Ethernet now supports CONFIG_NET_NOINTS
|
2016-12-03 11:42:15 -06:00 |
|
Gregory Nutt
|
eba1e076ec
|
PIC32MX/Z Ethernet: Now supports CONFIG_NET_NOINT
|
2016-12-03 09:50:14 -06:00 |
|
Gregory Nutt
|
bfa1da14e2
|
LM3S Ethernet now supports CONFIG_NET_NOINTS
|
2016-12-03 08:32:49 -06:00 |
|
Gregory Nutt
|
c0cbea2550
|
Remove RGMP and RGMP drivers.
|
2016-12-02 09:49:33 -06:00 |
|
Janne Rosberg
|
8442bf66b9
|
usbhost_cdcacm: add CDC_SUBCLASS_ACM and CDC_PROTO_ATM to supported class and proto
|
2016-11-30 12:20:23 -06:00 |
|
Janne Rosberg
|
4b282f219a
|
usbhost_composite: fix end offset in usbhost_copyinterface()
|
2016-11-30 12:18:23 -06:00 |
|
Gregory Nutt
|
96be43b270
|
drivers/net/: Adapt all Ethernet drivers to work as though CONFIG_NET_MULTIBUFFER were set. Remove all references to CONFIG_NET_MULTIBUFFER
|
2016-11-29 16:44:23 -06:00 |
|
Gregory Nutt
|
1793c1f8e1
|
Trivial, cosmetic change
|
2016-11-29 15:03:51 -06:00 |
|
Gregory Nutt
|
9ee3f3b933
|
sched_note: Permit spinlock and critical section notes in in-memory buffer iff sched_not_get() interfaces is disabled.
|
2016-11-28 18:36:26 -06:00 |
|
Gregory Nutt
|
d65be718c2
|
sched_note: Extend OS instrumentation to include some SMP events.
|
2016-11-27 17:14:57 -06:00 |
|
Gregory Nutt
|
0804286ad3
|
arch/: Add option to use low-priority work queue to all Ethernet drivers in arch that support CONFIG_NET_NOINTS.
|
2016-11-19 09:20:01 -06:00 |
|
Wolfgang Reißnegger
|
88539a7497
|
USBMSC: Fix length of mode6 sense reply packet.
|
2016-11-18 17:23:21 -08:00 |
|
Gregory Nutt
|
cdbc66addd
|
Merge branch 'master' of bitbucket.org:nuttx/nuttx
|
2016-11-18 09:30:40 -06:00 |
|
Gregory Nutt
|
936b55f608
|
drivers/net: Add option to use low-priority work queue to all drivers in drivers/net. Not yet added to all architecture-specific network drivers.
|
2016-11-18 09:22:49 -06:00 |
|
Gregory Nutt
|
175ec43628
|
Merged in slorquet/nuttx/timerfixes (pull request #171)
Timerfixes
|
2016-11-18 14:45:36 +00:00 |
|
Gregory Nutt
|
52560bba37
|
ENC28J60: Allow either HP or LP work queue to be used.
|
2016-11-18 08:41:27 -06:00 |
|
Sebastien Lorquet
|
5363d0619a
|
Fix warnings
|
2016-11-18 15:26:08 +01:00 |
|
Gregory Nutt
|
47b52a2633
|
Fix an error in manually bringing in Sebastien's changes; Update some comments.
|
2016-11-17 16:15:06 -06:00 |
|
Gregory Nutt
|
9acd57c819
|
Fix up some naming and update some comments.
|
2016-11-17 15:50:39 -06:00 |
|
Gregory Nutt
|
19c1c9d78b
|
All timer lower half drivers. Port Sebastien's changes to all all other implementations of the timer lower half. Very many just and untested. Expect some problems.
|
2016-11-17 15:03:31 -06:00 |
|
Sebastien Lorquet
|
197cec58d2
|
timer driver: Use signal to notify of timer expiration. Add generic argument so that there can be additional usage.
|
2016-11-17 14:38:21 -06:00 |
|
Gregory Nutt
|
d4a048c0c6
|
Timer driver: Add hooks to support signal notification of timer expiration. Commented out because invasive interface changes would also be required to complete the implementation.
|
2016-11-17 12:41:11 -06:00 |