88f8a09a25
Merged in masayuki2009/nuttx.nuttx/lc823450_i2s_tx_threshold (pull request #667 )
...
arch/arm/src/lc823450: Add tx start threshold to lc823450_i2s.c
In addition, lc823450_i2s_send() now accepts byte-aligned stream.
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
Approved-by: GregoryN <gnutt@nuttx.org>
2018-07-03 12:59:03 +00:00
f3bb2728d4
Merged in masayuki2009/nuttx.nuttx/update_lc823450_configs (pull request #666 )
...
configs/lc823450-xgevk: Update defconfig files
To audio/bt/rndis/usb, add CONFIG_FAT_MAXFNAME=255
To audio/rndis/usb, add CONFIG_SYSTEM_TASKSET=y
To bt/rndis, add CONFIG_AUDIO_I2SCHAR=y, CONFIG_EXAMPLES_I2SLOOP=y,
CONFIG_NET_UDP_BINDTODEVICE=y
From bt, remove CONFIG_SYSLOG_TIMESTAMP=y,
CONFIG_SYSLOG_TIMESTAMP_REALTIME=y
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
Approved-by: GregoryN <gnutt@nuttx.org>
2018-07-03 12:58:05 +00:00
898fdbded0
Merged in plwm/nuttx/stm32f746g-disco-sdram (pull request #665 )
...
Add support for STM32F746G-disco board SDRAM
* add support for STM32F746G-disco board SDRAM
* changed fb config to use SDRAM and fixed compilation
Approved-by: GregoryN <gnutt@nuttx.org>
2018-07-02 23:49:55 +00:00
8a1f3d6fa1
arch/arm/src/xmc4/xmc4_gpio.c: Add a specific bit encoding for openprain GPIO pin.
2018-07-02 10:56:58 -06:00
f3229cc00a
include/nuttx/usb/max3421e.h: Update MAX3421E header file.
2018-07-01 16:03:59 -06:00
83d6c9b1b9
Update MAX3421E header file.
2018-07-01 13:03:53 -06:00
3e9ba72441
net/sixlowpan: Fix typo uint16->uint16_t. Also picks up some cosmetic USB host changes.
2018-07-01 10:05:15 -06:00
824f1dd3fe
Squashed commit of the following:
...
lpc17: Removed duplicate configuration variable definitions from Kconfig: CONFIG_USBHOST_BULK_DISABLE, CONFIG_USBHOST_INT_DISABLE, and USBHOST_ISOC_DISABLE. These are global USBHOST configurations and are all defined in drivers/usbhost/Kconfig.
lpc17: Correct scope of naming of configuration variables: CONFIG_USBHOST_TDBUFFERS->CONFIG_LPC17_USBHOST_TDBUFFERS, CONFIG_USBHOST_TDBUFSIZE->CONFIG_LPC17_USBHOST_TDBUFSIZE, and CONFIG_USBHOST_IOBUFSIZE->CONFIG_LPC17_USBHOST_IOBUFSIZE
lpc17: Correct scope of naming of configuration variables: CONFIG_USBHOST_NEDS->CONFIG_LPC17_USBHOST_NEDS and CONFIG_USBHOST_NTDS->CONFIG_LPC17_USBHOST_NTDS
lpc17: Correct scope of naming of configuration variable: CONFIG_USBHOST_OHCIRAM_SIZE->CONFIG_LPC17_OHCIRAM_SIZE
2018-07-01 08:38:05 -06:00
e59b26370d
Squashed commit of the following:
...
Fix a few typo/compilation problems.
net/: Remove all CONFIG_NET_xxx_TCP_RECVWNDO configuration variables. They were used only to initialize the d_recwndo of the network device structure which no longer exists.
net/: Remove the device TCP receive window field (d_recvwndo) from the device structure. That value is no longer retained, but is calculated dynamically.
Remove some dangling references to CONFIG_NET_TCP_RWND_CONTROL.
net/tcp: Take read-ahead throttling into account when calculating the TCP receive window size.
net/tcp: tcp_get_recvwindow() now returns the receive window size directly (vs. indirectly via the device structure).
net/tcp: Remove CONFIG_NET_TCP_RWND_CONTROL. TCP window algorithm is now trigged only by CONFIG_NET_TCP_READAHEAD.
2018-07-01 07:59:33 -06:00
6ec8f9ce83
include/nuttx/usb: Add header file for the MAX3421E.
2018-07-01 07:09:36 -06:00
b32d8b1714
net/tcp and sixlowpan: Separate the the TCP receive window calculations to a separate header file. It must also be used by the special 6LoWPAN TCP logic.
2018-06-30 20:50:07 -06:00
d52b65b06d
Fix several configuration varaibles that were defined in multiple Kconfig files and/or lacked any scoping and the naming.
...
Squashed commit of the following:
lpc17, pic32mx, pic32mz: Fix duplicated, improperly scoped configuration variable names: CONFIG_PHY_SPEED100 and CONFIG_PHY_AUTONEG.
lpc17, pic32mx, pic32mz: Fix another duplicated configuration variable name: CONFIG_PHY_FDUPLEX.
lpc17: Fix naming scope: CONFIG_NET_HASH -> CONFIG_LPC17_ETH_HASH.
lpc17: Fix naming scope: CONFIG_NET_WOL -> CONFIG_LPC17_ETH_WOL.
lpc17, pic32mx, pic32mz: Fix naming scope: CONFIG_NET_ -> CONFIG_LPC17_ETH_PRIORITY.
lpc17, pic32mx, pic32mz: Fix another duplicated configuration variable name: CONFIG_NET_NTXDESC and CONFIG_NET_NRXDESC.
lpc17: Fix naming scope: CONFIG_NET_EMACRAM_SIZE -> CONFIG_LPC17_EMACRAM_SIZE.
2018-06-30 11:55:41 -06:00
576b8b1841
stm32, stm32f0, stm32f7, stm32h7, stm32l4: Fix another duplicated configuration variable name: CONFIG_SERIAL_DISABLE_REORDERING.
2018-06-30 09:43:51 -06:00
80f4f1fab8
configs/pcblogic-pic32mx, sure-pic32mx, ubw32: Update configurations so that the MIPs or Penguino toolchains may be used.
2018-06-29 11:38:12 -06:00
715a2779d4
fix a typo in the previous commit.
2018-06-29 08:55:32 -06:00
31ea6ec910
Update tools/link.sh per suggestions by Mark so that it can be used with MSYS vs copydir.sh.
2018-06-29 07:08:51 -06:00
f159f1089a
tools/refresh.sh: Add a --prompt option that will let you use --silent but will prompt before overwriting the original defconfig. arch/arm/src/stm32/Kconfig: Fix a HRTIM configuration error found in build testing.
2018-06-28 17:12:30 -06:00
67810d70d9
arch/arm/src/stm32l4: Fix typo errors found in build testing.
2018-06-28 16:24:21 -06:00
f24f523e4e
arch/arm/src/imxrt,stm32,stm32f0,stm32f7,stm32l4: Fix scope of naming. CONFIG_PM_SERIAL_ACTIVITY->CONFIG_STM32_PM_SERIAL_ACTIVITY, for example.
2018-06-28 16:18:15 -06:00
ceaafc2019
arch/arm/src/stm32: Fix scope of naming. CONFIG_RTC_LSECLOCK->CONFIG_STM32_RTC_LSECLOCK, for example. Fix some usage. Although CONFIG_STM32L4_RTC_xxxCLOCK was defined in the Kconfig, CONFIG_RTX_xxxCLOCK was used in numerous places in the code
2018-06-28 15:58:08 -06:00
500d2c2289
arch/arm/src/lpc11,lpc17,lpc43,stm32,stm32l4: Fix scope of naming. CONFIG_CAN_TSEG1->CONFIG_LPC17_CAN_TSEG, for example.
2018-06-28 15:44:42 -06:00
2552bfd2ef
arch/arm/src/lpc43: Fix lpc43 CAN configuration. Configuration settings were used and documented in README.txt files, but never in any Kconfig file. Also fix the scoping name of CAN variable naming. CONFIG_CANx_BAUD->CONFIG_LPC43_CANx_BAUD.
2018-06-28 15:11:23 -06:00
45cdc3a3d0
arch/arm/src/lpc11,lpc17,stm32,stm32l4: Fix scopy of nameing. CONFIG_CANx_BAUD->CONFIG_LPC17_CANx_BAUD, for example.
2018-06-28 14:47:14 -06:00
8c3aa99742
arch/arm/src/lpc11 and lpc17: Fix scopy of nameing. CONFIG_CAN_SAM->CONFIG_LPC17_CAN_SAM, for example.
2018-06-28 13:46:35 -06:00
8281dc1ed8
arch/arm/src/lpc11 and lpc17 and several README.tst files in configs/: Fix scopy of nameing. CONFIG_CANx_DIVISOR->CONFIG_LPC17_CANx_DIVISOR, for example.
2018-06-28 13:10:02 -06:00
2c78adf529
arch/arm/src/lpc11 and lpc17: Remove duplicate configuration variable CAN_LOOPBACK. The architecture-indendent version is selectable in drivers/can/Kconfig.
2018-06-28 12:52:02 -06:00
104860560d
arch/arm/src/lpc11 and lpc17: Remove duplicate configuration variable CAN_EXTID. The architecture-indendent version is selectable in drivers/can/Kconfig.
2018-06-28 12:50:10 -06:00
7dec38b18f
drivers/Kconfig: Global configuration variable CONFIG_FB_TRANSPARENCY is only defined in architecture-specific Kconfig files and then multiple times. Add the single global definition in drivers/Kconfig. arch/arm/src/stm32, stm32f7, and same5: Rename the architecture-specific variables appropriately. Selecting the architecture-specific version will also select the global version.
2018-06-28 12:31:51 -06:00
ba53219821
drivers/Kconfig: Global configuration variable CONFIG_FB_CMAP is only defined in architecture-specific Kconfig files and then multiple times. Add the single global definition in drivers/Kconfig. arch/arm/src/stm32 and stm32f7: Rename the architecture-specific variables appropriately. Selecting the architecture-specific version will also select the global version.
2018-06-28 12:01:55 -06:00
5d6e6d66e2
Fix another improperly qualified configuration varaible: CONFIG_HRTIM -> CONFIG_STM32_HRTIM. This is necessary to avoid conflict and confusion with other Kconfig files that may have the save variable definition.
2018-06-28 11:37:29 -06:00
b030209532
arch/arm/src/imxrt: Trivial SNVS from Rev 1. of the Reference Manual.
2018-06-28 10:54:56 -06:00
214e9d923e
Commit 0c963449d6, 'fs/vfs: Added support for checking if a descriptor is a socket in fstat().', changed sys/stat.h in way that breaks smartfs file-type stat flags. CROMFS is similarly broken, as tools/gencromfs.c was not updated to match the sys/stat.h changes. This commit fixes both issues. It probably is not a good idea to use NuttX sys/stat.h bit-field values directly in stored structure of filesystem.
2018-06-28 07:40:35 -06:00
044d538da3
Fix some errors found during upstream merge
2018-06-28 07:06:57 -06:00
9038cac4eb
arch/arm/src/imxrt: Fix some early testing bugs. The HPRTC is now functional. However, if the LPSRTC is enabled, then there is a hang during LPSRTC initialization. It appears that there is some problem in providing clocking and initializing the LPSRTC domain.
2018-06-27 15:27:56 -06:00
5f6293b93d
configs/nucleo-l476rg: Fix some confusional in conditional logic introduced by a recent patch.
2018-06-27 13:14:13 -06:00
06c7b9a5bc
Merged in david_s5/nuttx/master_f7_i2cfix (pull request #664 )
...
stm32f7:I2C reset Configure I2C pins as GPIO output
Pins were reset to inputs in the deinit. This resets
them to outputs.
Approved-by: GregoryN <gnutt@nuttx.org>
2018-06-27 18:35:34 +00:00
7415f62891
tools/testbuild.sh: Add option to specific location of nuttx directory.
2018-06-27 12:27:34 -06:00
5889a2397c
This commit addes support for the i.MXRT RTC. This initial commit is code complete (with limited featurs and options) but untested.
...
Squashed commit of the following:
arch/arm/src/imxrt: Fix some first time compile issues.
arch/arm/src/imxrt: This brings the RTC implement to code complete but still untested.
arch/arm/src/imxrt: Add some RTC initialization logic.
arch/arm/src/imxrt: Flesh out most of the RTC driver lower half and LPSRTC support.
arch/arm/src/imxrt: Some inital, partial implementation of the HPRTC and LPSRTC.
arch/arm/src/imxrt: Add HPSRTC/HPRTC file framework (no logic, just skeleton files).
arch/arm/src/imxrt: Add HPRTC header file.
Some initial configuration logic for SNVS LPRTC and HP RTC.
2018-06-27 11:19:12 -06:00
691470c1cd
arch/arm/src/stm32,stm32l4,stm32f7: Fix duplicated configuration options. All should be unique.
2018-06-27 10:20:14 -06:00
529ac8dd9b
arch/arm/src/lc823450: Fix setintstack macro in chip.h. In case of CONFIG_SMP=y, g_cpu0_instack_base and g_cpu1_instack_base
...
are not allocated just after g_instack_alloc but these values show the addresses for interrupt stack of each CPU. So to set the stack
pointer based on these variables, temporal register has to be used.
2018-06-27 06:50:00 -06:00
dfd2d218e3
fs/mount/fs_automount.c: Ignore return values from work_cancel().
2018-06-27 06:30:05 -06:00
99c8d2f801
configs/nucleo-l476rg: Add support for an extern SPI-driver SPI card on the Nucleo-L476RG.
2018-06-26 15:28:14 -06:00
d6ed50a370
arch/arm/src/stm32f7/chip/stm32f72xx73xx_dma.h: Macros did not account for the increase from 8 to 16 DMA channels.
2018-06-26 10:12:35 -06:00
cf3dd19352
Fix a typo.
2018-06-26 07:01:27 -06:00
8e6afb958a
net/udp: If the interface index of the device bound to a UDP socket is no longer valid because the device has been unregistered, then un-bind the UDP socket.
2018-06-26 06:53:13 -06:00
1c76e10c06
Merged in plwm/nuttx/stm32f746g-disco-lcd (pull request #661 )
...
add support for STM32F746G-disco board LCD
Approved-by: GregoryN <gnutt@nuttx.org>
2018-06-25 23:44:31 +00:00
e2c442cdcb
net/procfs: Fix a design REVISIT from the integration the IFINDEX logic and the existing ifconfig/procfs logic.
2018-06-25 17:42:56 -06:00
bdb73a60ca
Fix some errors found in build testing.
2018-06-25 17:06:29 -06:00
c439b93627
net/procfs and netdev: Fix some problems with ifconfig introduced with last changes. Also picks up one of Sebastien's changes that did not make it it before. net/udp: Fixes a DEBUGASSERT.
2018-06-25 17:06:11 -06:00
65be13bffe
net/udp: Finish support for the UDP_BINDTODEVICE protocol socket option
2018-06-25 15:07:53 -06:00
Masayuki Ishikawa