The pic32mx_usbpullup() and pic32mz_usbpullup() callbacks were referred to with various incorrect names in comments: pic32mx_pullup(), pic32mz_pullup(), stm32_pullup().
Master:
1. add DMA RX/TX support
2. add software chip selection
3. add user defined chip selection
4. add IOMUX check and IO map
Slave:
1. add DMA RX/TX support
2. add IOMUX check and IO map
3. use full 256 bit SPI TX/RX cache in non-DMA mode
Summary:
- This commit fixes IRQ control for the following use case
- The gs2200m Wi-Fi driver requests SPI-DMA to receive a packet.
- cxd56_dma.c enables IRQ for the SPI-DMA and start transfer.
- Then LCD driver requests SPI-DMA to display an image.
- These SPI-DMAs use different DMA channels but share the DMA controller.
- Also, they share the same IRQ.
- When the first SPI-DMA finishes the transfer, it disables the IRQ.
- And if the second SPI-DMA finishes the transfer just after the IRQ disabled.
- The second SPI-DMA will be in a deadlock condition.
- To resolve this issue, do not control IRQ during DMA transfer.
- Instead, up_enable_irq() is called in up_dma_initialize()
Impact:
- All use cases which use DMA
Testing:
- Tested with spresense:wifi with LCD
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
boards: metro-m4 Add support for starting the watchdog timer on the metro-m4.
Testing:
- Build check only
Signed-off-by: Leomar Mateus Radke <leomar@falker.com.br>
Summary:
- This commit adds SMP support to cxd56_farapi.c
- nxplayer now works in SMP mode
Impact:
- Spresense in SMP mode only
Testing:
- Add the following configs to spresense:wifi
- +CONFIG_SCHED_INSTRUMENTATION=yy
- +CONFIG_SCHED_INSTRUMENTATION_BUFFER=y
- +CONFIG_SMP=y
- +CONFIG_SMP_NCPUS=2
- +CONFIG_SPINLOCK_IRQ=y
- Run nxplayer and play an WAV file on uSD card
- NOTE: http streaming playback would cause deadlocks
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
Fixes:
##[error]net/tun.c:837:13: error: conflicting types for 'tun_poll_expiry'
837 | static void tun_poll_expiry(FAR void *arg)
| ^~~~~~~~~~~~~~~
net/tun.c:196:13: note: previous declaration of 'tun_poll_expiry' was here
196 | static void tun_poll_expiry(wdparm_t arg);
| ^~~~~~~~~~~~~~~
And
##[error]net/tun.c:881:57: error: passing argument 4 of 'wd_start' makes integer from pointer without a cast [-Werror=int-conversion]
881 | wd_start(&priv->txpoll, TUN_WDDELAY, tun_poll_expiry, priv);
| ^~~~
| |
| struct tun_device_s *
In file included from /github/workspace/sources/nuttx/include/nuttx/sched.h:41,
from /github/workspace/sources/nuttx/include/sched.h:34,
from /github/workspace/sources/nuttx/include/nuttx/arch.h:81,
from net/tun.c:60:
/github/workspace/sources/nuttx/include/nuttx/wdog.h:134:42: note: expected 'wdparm_t' {aka 'long unsigned int'} but argument is of type 'struct tun_device_s *'
134 | wdentry_t wdentry, wdparm_t arg);
| ~~~~~~~~~^~~
And
chip/cxd56_rtc.c: In function 'up_rtc_initialize':
##[error]chip/cxd56_rtc.c:358:3: error: too many arguments to function 'cxd56_rtc_initialize'
358 | cxd56_rtc_initialize(1, NULL);
| ^~~~~~~~~~~~~~~~~~~~
chip/cxd56_rtc.c:253:13: note: declared here
253 | static void cxd56_rtc_initialize(wdparm_t arg)
| ^~~~~~~~~~~~~~~~~~~~
boards: metro-m4 Add support for starting the watchdog timer on the metro-m4.
Testing:
- Build check only
Signed-off-by: Leomar Mateus Radke <leomar@falker.com.br>
to save the preserved space(1KB) and also avoid the heap overhead
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
Change-Id: I694073f68e1bd63960cedeea1ddec441437be025
Interrups were blocked 1*n/baud Seconds. The former comment indicates
there was an asumption that the TXE would be set at DMA completion.
In reality this is not true. There can be 1 char in the TX Shift
register and one in the TX holding register, when DMA completes.
Waiting on TXE is not needed at all. The DMA will resume on the
DMA req when the TX holding register is written to the TX Shift
register.
so size with nuttx could report the correct bss value:
text data bss dec hex filename
155467 1464 1948 158879 26c9f nuttx
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
Change-Id: I7e9ec4d09d14b6f15b235b4b46ebdd98986d9750
1.Expose the notification through fb_vtable_s::updatearea
2.Incorporate old nx_notify_rectangle into the new updatearea callback
3.Migrate the calle of nx_notify_rectangle to fb_vtable_s::updatearea
Change-Id: Ia3d1f73e8757b2d381586d76ec6adc16c810018d
Signed-off-by: Huang Qi <huangqi3@xiaomi.com>
boards: metro-m4 Add support for starting the watchdog timer on the metro-m4.
Testing:
- Build check only
Signed-off-by: Leomar Mateus Radke <leomar@falker.com.br>
Summary:
- Fix typo in Kconfig so that we can configure IMXRT_ENET_NRXBUFFERS.
Impact:
- imxrt family with ethernet configuration
Testing:
- imxrt1060-evk:netnsh
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
Xiang Xiao