If per tick is set to 10ms, it will cause nxsig_usleep(1000) in the
sdio driver to sleep for 19ms, which is much longer than the
expected 1ms, resulting in very low write performance. Add option to
reduce CPU hogging by using sched_yield(), though it may also affect
write performance when the CPU is busy.
Signed-off-by: Yinzhe Wu <Yinzhe.Wu@sony.com>
Reviewed-by: Yuezhang Mo <Yuezhang.Mo@sony.com>
Reviewed-by: Jacky Cao <Jacky.Cao@sony.com>
Tested-by: Yinzhe Wu <Yinzhe.Wu@sony.com>
Some hardware needs to config this delay to write one data block, because
the hardware needs more time to wear leveling and bad block manage.
Signed-off-by: dongjiuzhu1 <dongjiuzhu1@xiaomi.com>
mmcsd:Remove CONFIG_ARCH_HAVE_SDIO_DELAYED_INVLDT
stm32h7:sdmmc remove CONFIG_ARCH_HAVE_SDIO_DELAYED_INVLDT
stm32f7:sdmmc remove CONFIG_ARCH_HAVE_SDIO_DELAYED_INVLDT
stm32f7:sdmmc WRITE COMPLETE prevent false triggers
stm32h7:sdmmc WRITE COMPLETE prevent false triggers
While testing PR #2989 on the H7 I noticed that the cards
were staying in 1-bit mode. The root cause was that the
scr read path was using DMA without an invlidate.
This was caused by CONFIG_ARCH_HAVE_SDIO_DELAYED_INVLDT,
but the sdmmc driver, did not use the delayed invalidate
nor would it work on 8 bytes.
The driver fully supported dcache mgt on runt buffers, but
the #ifdef CONFIG_ARCH_HAVE_SDIO_DELAYED_INVLDT blocked it.
Reviewing the PR that added CONFIG_ARCH_HAVE_SDIO_DELAYED_INVLDT
it may have been valid at the time. But after the dcache operations
we fixed. It is not necessary and offers no benefit.
This commit does two things:
1. First, it reorganizes the driver Kconfig files so that each is self contained. Before, a part of the driver configuration was in drivers/Kconfig and the rest was in in drivers/xyz/Konfig. Now, all of the driver configuration is consolitated in the latter.
2. Second, this commit correct numerous serious errors introduced in a previous reorganization of the driver Kconfig files. This was first noted by Nicholas Chin in PR270 for the case of the drivers/i2c/Kconfig but some examination indicates that the error was introduced into several other Kconfig files as well.
The nature of the introduced error was basically this:
- Nothing must intervene between the menuconfig selection and the following conditional configuration otpions.
- A previous PR erroneously introduced unconditional options between the menuconfig and the following confditional logic, thus corrupting the driver menus.
This error was easy to make because the driver Kconfig files were not well modularized. Making them fully self-contained should eliminate this kind of error in the future.
This logic implements a change the avoids the busy-wait poll by reconfiguring the SD D0 pin as a GPIO interrupt, then waiting for the card to becom ready without taking up CPU cycles.
This change is conditioned on CONFIG_MMCSD_SDIOWATI_WRCOMPLETE and is currenlty only implemented for the STM32 SDIO driver.
From David Sidrane
Windrow14