Gregory Nutt
|
b3ecd158ac
|
Mov apps/examples/composite to apps/system/composite; convert configs/stm3210e-eval/composite to use kconfig-frontend tools -- untested
|
2013-09-25 18:50:14 -06:00 |
Gregory Nutt
|
0b450bc202
|
Move apps/examples/usbmsc to apps/system/usbmsc
|
2013-09-25 16:54:39 -06:00 |
Gregory Nutt
|
70f0ffdfc5
|
Finally... renamed all CONFIG_DRAM_ settings to CONFIG_RAM_
|
2013-07-26 10:09:17 -06:00 |
Gregory Nutt
|
6505474f03
|
SAM configurations: don't use 3 memory regions unless SMC is enabled
|
2013-07-12 14:50:22 -06:00 |
Gregory Nutt
|
e0310e2cc8
|
Flesh out the Arduino Due board configuratino and integrate it with the build and configuration system
|
2013-06-27 14:24:27 -06:00 |
Gregory Nutt
|
bc7ac20616
|
Add peripheral configuration logic for the SAM3X/3A; Change all references to SAM3/4 SPI to SPI0 for compatibity with the SAM3X/3A which has SPI0 and SPI1; Add directory which will eventually holdl an Arduino Due port
|
2013-06-26 18:46:44 -06:00 |
Gregory Nutt
|
8db5d403ee
|
SAM3U-EK board now runs at 96MHz
|
2013-06-17 08:41:52 -06:00 |
Gregory Nutt
|
1f056e3826
|
Add support for a generic windows-based EABI toolchain; Add NX configuration to force default NXTK border colors
|
2013-06-13 11:04:18 -06:00 |
Gregory Nutt
|
83ecc03d17
|
Remove CONFIG_XYZ_BUILTIN configurations, replace with the single CONFIG_NSH_BUILTIN_APPS. Add SAM3/4 sam_periphclks.h which is just a header file that includes the right header file. Misc SAM3U-EK cleanup
|
2013-06-12 17:32:00 -06:00 |
Gregory Nutt
|
bafe910ce4
|
SAM4S: Add memory map and interrupt logic
|
2013-06-10 16:18:47 -06:00 |
Gregory Nutt
|
5f97fb8041
|
Rename sam3u/ architecture directories to sam34/ to include the SAM4L
|
2013-06-02 13:57:22 -06:00 |
Gregory Nutt
|
28c64c90bd
|
Move SAM3U header files to arch/arm/src/sam3u/chip. Some renaming of SAM3U to SAM to ssupport SAM4. Convert all configs/sam3u-ek configurations to use the kconfig-frontends tool
|
2013-06-02 10:33:57 -06:00 |
patacongo
|
1c52dce216
|
More changes for a kernel-mode allocator (more to be done)
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5724 42af7a65-404d-4744-a932-0658087f49c3
|
2013-03-09 21:12:20 +00:00 |
patacongo
|
e0e0006bc9
|
Set stdio buffer sizes to 0 or 64. No need for 256 or 1024 stdio buffers
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5604 42af7a65-404d-4744-a932-0658087f49c3
|
2013-02-03 17:47:03 +00:00 |
patacongo
|
a5fbf66049
|
Don't build drivers/mtd unless CONFIG_MTD is defined (Denis Carikli)
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5519 42af7a65-404d-4744-a932-0658087f49c3
|
2013-01-15 00:03:58 +00:00 |
patacongo
|
3f0b723b7c
|
Fix a *critical* bug in the task exit logic. Implements SIGCHILD
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5513 42af7a65-404d-4744-a932-0658087f49c3
|
2013-01-12 19:58:45 +00:00 |
patacongo
|
8b5fb4c1f6
|
Patch to removed MMCSD NSLOTS warning from Freddie Chopin
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5316 42af7a65-404d-4744-a932-0658087f49c3
|
2012-11-06 14:57:01 +00:00 |
patacongo
|
918e70fe8e
|
Part I of port of Rhombus math library
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5269 42af7a65-404d-4744-a932-0658087f49c3
|
2012-10-28 14:31:57 +00:00 |
patacongo
|
279fc93c4e
|
Change all occurrences of CONFIG_EXAMPLE_ to CONFIG_EXAMPLES_ for consistency; fleshed out a few more Kconfig files
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5211 42af7a65-404d-4744-a932-0658087f49c3
|
2012-10-04 17:36:07 +00:00 |
patacongo
|
7a2692df6a
|
Resync new repository with old repo r5166
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5154 42af7a65-404d-4744-a932-0658087f49c3
|
2012-09-17 18:35:37 +00:00 |
patacongo
|
7a9457bb07
|
Email address change in nuttx/
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5145 42af7a65-404d-4744-a932-0658087f49c3
|
2012-09-13 18:32:24 +00:00 |
patacongo
|
f39a3c9417
|
Remove several unused configuration values
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5113 42af7a65-404d-4744-a932-0658087f49c3
|
2012-09-08 04:29:48 +00:00 |
patacongo
|
d2ef49c64e
|
More Shenzhou board logic
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5111 42af7a65-404d-4744-a932-0658087f49c3
|
2012-09-08 02:10:56 +00:00 |
patacongo
|
59588247bf
|
Kconfig changes + back out part of last check-in: The 2STOP setting must be integer 0/1, not boolean
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5086 42af7a65-404d-4744-a932-0658087f49c3
|
2012-09-04 15:28:56 +00:00 |
patacongo
|
17e0c5198e
|
Changes to Kconfig and matching defconfig files
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5085 42af7a65-404d-4744-a932-0658087f49c3
|
2012-09-04 14:43:56 +00:00 |
patacongo
|
435dbaacd8
|
Add configurable application entry point
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5070 42af7a65-404d-4744-a932-0658087f49c3
|
2012-08-30 20:13:50 +00:00 |
patacongo
|
4509f0cb05
|
Remove documentation from defconfig files so that they are more maintainable
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5068 42af7a65-404d-4744-a932-0658087f49c3
|
2012-08-30 15:44:02 +00:00 |
patacongo
|
d164b69d94
|
The USB host driver has been verified on the STM32F4Discovery
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5067 42af7a65-404d-4744-a932-0658087f49c3
|
2012-08-29 19:38:53 +00:00 |
patacongo
|
05d687e9eb
|
Lots of defconfig changes for compatibility with the configuration tool
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5050 42af7a65-404d-4744-a932-0658087f49c3
|
2012-08-23 22:46:36 +00:00 |
patacongo
|
b8a19e310e
|
CONFIG_DRAM_END configuration change from Richard Cochran
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5038 42af7a65-404d-4744-a932-0658087f49c3
|
2012-08-20 12:44:15 +00:00 |
patacongo
|
e45c3b97b3
|
Kconfig update
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@4597 42af7a65-404d-4744-a932-0658087f49c3
|
2012-04-12 21:52:04 +00:00 |
patacongo
|
1ccaed1ab4
|
NSH now uses the new Telnet daemon and built-in tasks started by NSH can be used over Telnet
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@4361 42af7a65-404d-4744-a932-0658087f49c3
|
2012-02-02 16:04:09 +00:00 |
patacongo
|
270bd0a9c2
|
More name changes: USBSER->PL2303 CDCSER->CDCACM
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@4337 42af7a65-404d-4744-a932-0658087f49c3
|
2012-01-25 23:04:17 +00:00 |
patacongo
|
c6b62075aa
|
Massive name change USB STRG -> USB MSC
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@4334 42af7a65-404d-4744-a932-0658087f49c3
|
2012-01-25 20:17:59 +00:00 |
patacongo
|
ea1594a398
|
Add resource.h and fixed frequently cloned typo
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@3642 42af7a65-404d-4744-a932-0658087f49c3
|
2011-05-24 19:11:47 +00:00 |
patacongo
|
3552ddb5ff
|
Add a layer to redirect kernel-mode memory manager accesses
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@3466 42af7a65-404d-4744-a932-0658087f49c3
|
2011-04-05 15:50:01 +00:00 |
patacongo
|
349f6aae93
|
Prep for 6.0 release
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@3408 42af7a65-404d-4744-a932-0658087f49c3
|
2011-03-21 21:59:35 +00:00 |
patacongo
|
c9e6a573bb
|
Move nuttx/examples to apps/examples
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@3405 42af7a65-404d-4744-a932-0658087f49c3
|
2011-03-20 18:18:19 +00:00 |
patacongo
|
34e8f21889
|
Update documentation, change CONFIG_EXAMPLES_NSH to CONFIG_NSH
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@3394 42af7a65-404d-4744-a932-0658087f49c3
|
2011-03-18 20:35:31 +00:00 |
patacongo
|
1ead79b6d5
|
More support for SLIP data link protocol
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@3370 42af7a65-404d-4744-a932-0658087f49c3
|
2011-03-12 15:36:28 +00:00 |
patacongo
|
1c5ab5f894
|
P14201 driver now uses new SPI cmddata method
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@3158 42af7a65-404d-4744-a932-0658087f49c3
|
2010-12-04 01:56:50 +00:00 |
patacongo
|
61955434b1
|
Add strnlen()
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@3054 42af7a65-404d-4744-a932-0658087f49c3
|
2010-10-27 20:54:11 +00:00 |
patacongo
|
30f2743926
|
Fix a signal trampoline bug
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@3053 42af7a65-404d-4744-a932-0658087f49c3
|
2010-10-27 01:46:08 +00:00 |
patacongo
|
f4e7915e3d
|
Replace CONFIG_EXAMPLE with CONFIG_APP_DIR
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@2893 42af7a65-404d-4744-a932-0658087f49c3
|
2010-08-28 18:06:51 +00:00 |
patacongo
|
b4a3a986cd
|
MCI requires DMA
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@2555 42af7a65-404d-4744-a932-0658087f49c3
|
2010-03-26 02:26:24 +00:00 |
patacongo
|
32fbb68e97
|
Fix SRAM1 base address
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@2530 42af7a65-404d-4744-a932-0658087f49c3
|
2010-01-30 04:43:54 +00:00 |
patacongo
|
71735de874
|
Fix memory configuration
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@2527 42af7a65-404d-4744-a932-0658087f49c3
|
2010-01-24 17:54:09 +00:00 |
patacongo
|
307f419f2a
|
Default format is .bin
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@2524 42af7a65-404d-4744-a932-0658087f49c3
|
2010-01-23 17:01:03 +00:00 |
patacongo
|
f016945ba8
|
Misc fixes, add button support, GPIO interrupt support
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@2523 42af7a65-404d-4744-a932-0658087f49c3
|
2010-01-23 03:05:05 +00:00 |
patacongo
|
c6bbe9dc3d
|
Add README
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@2521 42af7a65-404d-4744-a932-0658087f49c3
|
2010-01-22 03:45:25 +00:00 |