add support for UART 16550 compatible PCI device.
For now we support qemu serial PCI devices and AX99100 based cards.
Signed-off-by: p-szafonimateusz <p-szafonimateusz@xiaomi.com>
prepare 16550 UART driver to support PCI:
- [breaking change] change argument of uart_ioctl() from `struct file *filep` to `FAR struct u16550_s *priv`
Also fix moxart_16550.c build related to this change
- [breaking change] change argument of uart_getreg() and uart_putreg from `uart_addrwidth_t base` to `FAR struct u16550_s *priv`
Also fix arch/x86/src/qemu/qemu_serial.c and arch/x86_64/src/intel64/intel64_serial.c related to this change
- [breaking change] change argument of uart_dmachan() from `uart_addrwidth_t base` to `FAR struct u16550_s *priv`
- move `struct u16550_s` to public header
- generalize UART_XXX_OFFSET so we can use it with any register increment
- make u16550_bind(), u16550_interrupt(), u16550_interrupt() public
- remove arch/or1k/src/common/or1k_uart.c and use common 16550 MIMO interfacve
- change irq type in `struct u16550_s` from uint8_t to int to match MSI API
Signed-off-by: p-szafonimateusz <p-szafonimateusz@xiaomi.com>
1. only support pci modern device;
2. need the pci controller support MSI/MSI-X;
It has been verified based on virtio-rng and virtio-net.
Signed-off-by: Yongrong Wang <wangyongrong@xiaomi.com>
Signed-off-by: Bowen Wang <wangbowen6@xiaomi.com>
rpmsg_virtio_ivshmem is a ivshmem based rpmsg virtio driver,
with this driver, we can use the rpmsg virtio in qemu platfrom
Signed-off-by: Yongrong Wang <wangyongrong@xiaomi.com>
Signed-off-by: Bowen Wang <wangbowen6@xiaomi.com>
Rpmsg VirtIO is a virtio transport implementation for Rpmsg, and
it's different to the rptun framework.
rpmsg_virtio.c implements the rpmsg virtio transport layer by itself
to avoid use the remoteproc implementation in OpenAMP to save code
size, so it can be treated as a lightweight version of rptun.
Therefore, rpmsg_virtio.c only support the communication feature and
do not support contoll the life cycle of the remote core.
But benefit by it's small footprint, it can be used in the chips with
small flash.
Signed-off-by: Yongrong Wang <wangyongrong@xiaomi.com>
Signed-off-by: Bowen Wang <wangbowen6@xiaomi.com>
Some devices need to clear the fb panbuf when waking up from sleep
to avoid outputting residual buffers from before sleeping
Signed-off-by: rongyichang <rongyichang@xiaomi.com>
IOB buffer participates in the calculation of the congestion strategy
in the protocol stack, if the iob buffer is exhausted or there are
too many syslog printing tasks, the behavior of the protocol stack
and log printing will unable to determined, this PR will remove support
for iob buffer in syslog
Signed-off-by: chao an <anchao@lixiang.com>
According to the mmap(2) specification, anonymous pages should be initialized to zero unless the MAP_UNINITIALIZED is specified.
Signed-off-by: ouyangxiangzhen <ouyangxiangzhen@xiaomi.com>
This commit add MADV_HUGEPAGE and MADV_NOHUGEPAGE definitions for madvise. Notice that none of these flags have been implemented yet.
Signed-off-by: ouyangxiangzhen <ouyangxiangzhen@xiaomi.com>
coresight_claim_device will fail when unregister device
which has been enabled. device should be the init state when
it is unregistered.
Signed-off-by: liaoao <liaoao@xiaomi.com>
64-by-32-bit divisions are prominent in the NuttX, even on 32-bit
machines. Luckily, many of them use a constant divisor that allows
for a much faster multiplication by the divisor's reciprocal.
The compiler already performs this optimization when compiling a 32-by-32
division with a constant divisor. Unfortunately, on 32-bit machines, gcc
does not optimize 64-by-32 divisions in that case, except for constant
divisors that happen to be a power of 2.
Let's avoid the slow path whenever the divisor is constant by manually
computing the reciprocal ourselves and performing the multiplication
inline. In most cases, this improves performance of 64-by-32 divisions
by about two orders of magnitude compared to the __div64_32() fallback,
especially on architectures lacking a native div instruction.
Signed-off-by: ligd <liguiding1@xiaomi.com>
CID 1266677: (#2 of 2): Use 32-bit time_t (Y2K38_SAFETY)
1. declaration_with_small_time_t: Declare use of time_t, which is defined as 32 bits wide on this platform, while the minimum safe width is 64.
Signed-off-by: yinshengkai <yinshengkai@xiaomi.com>
Signed-off-by: ligd <liguiding1@xiaomi.com>
Using the ts/tick conversion functions provided in clock.h
Do this caused we want speed up the time calculation, so change:
clock_time2ticks, clock_ticks2time, clock_timespec_add,
clock_timespec_compare, clock_timespec_subtract... to MACRO
Signed-off-by: ligd <liguiding1@xiaomi.com>
This commit refactors the wdog module to use absolute time representation internally. The main improvements include:
1. Fixed recursive watchdog handling caused by calling wd_start within watchdog timeout callback function.
2. Simplified timer processing to improve performance and enhance code readability.
3. Improved accuracy of timers.
4. Reduced critical section and interrupt disable time, improving real-time performance.
Signed-off-by: ouyangxiangzhen <ouyangxiangzhen@xiaomi.com>
Signed-off-by: ligd <liguiding1@xiaomi.com>
reason:
In SMP, when a context switch occurs, restore_critical_section is executed.
To reduce the time taken for context switching, we directly pass the required
parameters to restore_critical_section instead of acquiring them repeatedly.
Signed-off-by: hujun5 <hujun5@xiaomi.com>
p-szafonimateusz