IN_MODIFY event should occur on file modification, which includes
truncate. This is consistent with the inotify usage on Linux.
Signed-off-by: Michal Lenc <michallenc@seznam.cz>
reason:
To remove the "sync pause" and decouple the critical section from the dependency on enabling interrupts,
after that we need to further implement "schedlock + spinlock".
changelist
1 Modify the implementation of critical sections to no longer involve enabling interrupts or handling synchronous pause events.
2 GIC_SMP_CPUCALL attach to pause handler to remove arch interface up_cpu_paused_restore up_cpu_paused_save
3 Completely remove up_cpu_pause, up_cpu_resume, up_cpu_paused, and up_cpu_pausereq
4 change up_cpu_pause_async to up_send_cpu_sgi
Signed-off-by: hujun5 <hujun5@xiaomi.com>
The recv buffer is used both in user thread and rpmsg ept->callback
thread, so add recv lock to protect the recv buffer.
Signed-off-by: Bowen Wang <wangbowen6@xiaomi.com>
tools/configure.sh esp32c3-generic:wifi
wapi scan wlan0
has no return result after couple times
rootcause:
mq_timedsend() return failed because the time valid check error.
the ts_nsec is bigger than 1000000000.
esp_update_time() hasn't consider of the ns > 1s after the adding
calculation
Signed-off-by: ligd <liguiding1@xiaomi.com>
Change mqueue_msg_s to a dynamic array so that
mqueue msg can be malloc based on the msg size
of the current data when applied dynamically.
Signed-off-by: zhangyuan29 <zhangyuan29@xiaomi.com>
Improved setconfig support for setting multiple parameters for the .config
Added Cmake and Ninja version info
Modified savedefconfig now behaves with the same logic as the tools/refresh.sh script used for the update stage (make build) on GitHub.
This PR continues to enhance the CI Workflow, to skip the unnecessary NuttX Builds. The PR will update the CI Build Workflow `build.yml`, to call the Refactored Build Rules in `arch.yml` (which is a Reusable Workflow).
The original rules were migrated from `build.yml` to `arch.yml`:
- We target only the Simple PRs: One Arch Label + One Size Label (e.g. "Arch: risc-v, Size: XS")
- For "Arch: risc-v": Build `risc-v-01`, `risc-v-02`
- For "Arch: xtensa": Build `xtensa-01`, `xtensa-02`
- The above rules apply when the PR is Created or Modified
- When the PR is Merged: All targets shall be built
This PR applies the New and Updated Rules defined in `arch.yml`:
- For "Arch: arm": Build `arm-01`, `arm-02`, ...
- For "Arch: arm64": Build `other`
- For "Arch: simulator": Build `sim-01`, `sim-02`
- For "Arch: x86_64": Build `other`
- For Simple PRs (One Arch Label + One Size Label): Skip the macOS and Windows builds (`macos`, `macos/sim-*`, `msys2`) since these builds are costly and slow
- Except for "Arch: Simulator", which will enable the macOS Builds for `sim-01` and `sim-02`
- If GitHub CLI Fails: Build all targets
The code is explained here: https://github.com/apache/nuttx/issues/13775
Add heap current used to note.
Plot it in segger sysview data plot.
Signed-off-by: xuxingliang <xuxingliang@xiaomi.com>
Signed-off-by: Neo Xu <neo.xu1990@gmail.com>
Record all memory allocation and release, save to ram, used to analyze memory allocation rate and memory usage
Its absolute value is not trustworthy because the memory will be allocated in thread A and released in thread B
netinit-5 [0] 0.105984392: tracing_mark_write: C|5|Heap Usage|96|free: heap: 0x606000000020 size:24, address: 0x603000000370
netinit-5 [0] 0.105996874: tracing_mark_write: C|5|Heap Usage|24|free: heap: 0x606000000020 size:72, address: 0x6070000008e0
nsh_main-4 [0] 3.825169408: tracing_mark_write: C|4|Heap Usage|2177665|free: heap: 0x606000000020 size:424, address: 0x614000000840
nsh_main-4 [0] 3.825228525: tracing_mark_write: C|4|Heap Usage|14977|free: heap: 0x606000000020 size:2162688, address: 0x7f80a639f800
nsh_main-4 [0] 3.825298789: tracing_mark_write: C|4|Heap Usage|15189|malloc: heap: 0x606000000020 size:20, address: 0x6030000003a0
Signed-off-by: yinshengkai <yinshengkai@xiaomi.com>
Signed-off-by: Neo Xu <neo.xu1990@gmail.com>
This PR continues to enhance the CI Workflow, to skip the unnecessary NuttX Builds. The changes in this PR will not take effect until the next PR, which will switch `build.yml` to use the rules in this PR.
In this PR, we refactor the CI Build Rules into a separate Reusable Workflow `arch.yml`. The original rules were migrated to `arch.yml`:
- We target only the Simple PRs: One Arch Label + One Size Label (e.g. "Arch: risc-v, Size: XS")
- For "Arch: risc-v": Build `risc-v-01`, `risc-v-02`
- For "Arch: xtensa": Build `xtensa-01`, `xtensa-02`
- The above rules apply when the PR is Created or Modified
- When the PR is Merged: All targets shall be built
New and Updated Rules:
- For "Arch: arm": Build `arm-01`, `arm-02`, ...
- For "Arch: arm64": Build `other`
- For "Arch: simulator": Build `sim-01`, `sim-02`
- For "Arch: x86_64": Build `other`
- For Simple PRs (One Arch Label + One Size Label): Skip the macOS and Windows builds (`macos`, `macos/sim-*`, `msys2`) since these builds are costly and slow
- Except for "Arch: Simulator", which will enable the macOS Builds for `sim-01` and `sim-02`
- If GitHub CLI Fails: Build all targets
The code is explained here: https://github.com/apache/nuttx/issues/13775
At line 236, we may set the null terminate to the priv->buffer,
when flushing the priv->buffer, we should use up_putc() instead up_nputs()
to ensure all the data has been output, because up_nputs() will check
the null terminate but up_putc() not.
Signed-off-by: yuanyongjian <yuanyongjian@xiaomi.com>
misc/rpmsgblk.c:616:29: warning: implicit declaration of function ‘rpmsg_virtio_get_buffer_size’; did you mean ‘rpmsg_get_rx_buffer_size’? [-Wimplicit-function-declaration]
616 | if (MAX(msglen, rsplen) > rpmsg_virtio_get_buffer_size(priv->ept.rdev))
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~
| rpmsg_get_rx_buffer_size
Signed-off-by: Yongrong Wang <wangyongrong@xiaomi.com>
Michal Lenc