b493dde4cf
TCP networking: In the TCP connection operation, it was trying to setup the network monitor BEFORE the socket was successfully connected. This, of course, has ALWAYS failed because the socket is not yet connected and the TCP state is not yet correct for a connected socket. However, because of other changes net_startmonitor(0 no returns a failure condition that causes worse problems when trying to connect. The fix is to move the logic that starts the network monitor to AFTER the socket has been successfully connected.
2015-05-31 11:35:28 -06:00
33085cb309
Networking: The network device list was protected by a re-entrant semaphore. With the recent change to support network device callback, the network stack needs to access the network device list too. Some drivers, however, run the network stack from the interrupt level -- this is bad but a fact in the current state. Of course,those drivers are unable to take the semaphore and will assert.
...
The solution here is to eliminate the device devices semaphore altogether. This eliminates netdev_semtake() and netdev_semgive() and replaces them with net_lock() and net_unlock() which have larger scope as needed for this purpose.
2015-05-31 08:34:03 -06:00
6687e156e6
Revamp last change. IFF_UP only required when allocating callback, not freeing.
2015-05-30 21:13:58 -06:00
28b46c7bfa
To be valid, a network device must not only exist, but be in the UP state
2015-05-30 12:54:18 -06:00
04a661a97c
TCP networking: Add support for network driver events
2015-05-30 09:12:27 -06:00
ab50e9d04d
Networking: Get rid of g_ipv4_allzeroaddr and g_ipv4_alloneaddr. It is more efficient and more intuitive to use INADDR_ANY and INADDR_BROADCAST
2015-05-29 15:16:11 -06:00
fa8b7c19b7
Forgot to add a file in the last commit
2015-05-29 11:03:02 -06:00
f10fdf7ad4
Networking: Add a test to see a device pointer is still valid
2015-05-29 11:01:03 -06:00
e81f279315
Networking: Modify event list handling: Now there are two event lists each device structure: (1) One is for ARP and ICMP data related evetns, the other is for device related events. Callback allocation/free routines no accept a device paramter as well as a list: If the device paramter is added, then the callback goes into both the connection-related liast AND the device event list. Thus each socket type can received both custom data-related events as well as common device related events.
2015-05-28 12:01:38 -06:00
390eeaae69
Add function headers to netdev.h header file
2015-05-27 14:34:15 -06:00
b94321cfb4
Extend device specific callbacks to ICMPv6 and ARP. Fix some IPv6 compilation errors that have crept in
2015-05-27 11:39:44 -06:00
8ecb84ed89
Improve icmp handling if MULTINIC enabled. From Max Neklyudov
2015-05-27 09:26:00 -06:00
8cb4e78a1a
Complete implementation of the IPv6 routing logic. From Max Neklyudov.
2015-05-13 07:22:02 -06:00
21d6e41032
Add TUN device. From Max Neklyudov
2015-03-11 06:52:56 -06:00
5c13722416
Networking: Improve the network device registration logic. When multiple link types are used, modify how each interface number is assigned to the device name by incrementing the device number individually for each interface link type. From Max Neklyudov.
2015-02-27 08:23:14 -06:00
19f3d46eb0
Fix a list handling error in netdev_unregister(). From Max Neklyudov
2015-02-27 08:01:31 -06:00
b756df982d
net/: Lots of build problems introduced into multiple NIC support. Many places where conditional logic based on CONFIG_NETDEV_MULTINIC is confused with CONFIG_NET_MULTILINK. Lots of code changed with IPv6 that was never compiled with MULTINIC enabled. Still some problem with parameter passing.
2015-02-09 18:15:34 -06:00
1928feafca
Networking: Fix some errors that crept in with IPv6
2015-02-06 13:34:19 -06:00
9791e829f5
ICMPv6: This completes coding of the ICMPv6 auto-configuration feature. It is not yet functional
2015-02-03 15:40:56 -06:00
0e23712db4
Add an ioctal() that can be used to perform ICMPv6 auto-configuration
2015-02-03 08:54:42 -06:00
55d94b6748
Unix domain: With these changes I can build a system with no link layer enabled, only Unix domain sockets
2015-01-27 15:26:03 -06:00
c250c97186
Unix domain: More fixed to build without Ethernet or Slip
2015-01-27 14:26:10 -06:00
5d31687e75
Correct name of fields in struct sockaddr_in6: sin6_port and sin6_family, not sin_port and sin_family
2015-01-20 18:14:09 -06:00
aec4528882
Cosmetic standardization of some naming in comments
2015-01-19 16:02:56 -06:00
59c0757183
Fix a few more dangling IPv6 issues found by code inspection
2015-01-18 10:33:27 -06:00
eb3c6e8390
Networking: Some fixes for compilation when both IPv4 and IPv6 are enabled
2015-01-18 09:23:22 -06:00
2663538b0a
Networking: Replace all references to the macros net_ipaddr_copy, net_ipaddr_hdrcopy, net_ipaddr_cmp, net_ipaddr_hdrcmp, and net_ipaddr_maskcmp with the appropriate IPv4 or IPv6 version of the macro (such as net_ipv4addr_copy). The goal is to support both IPv4 and IPv6 simultaneously. This requires that the macros be distinct and not conditionally defined to one on or the other.
2015-01-16 13:01:08 -06:00
5e938941a6
Networking: Replace all references to net_ipaddr_t with either in_addr_t on net_ipv6addr_t. The goal is to support both IPv4 and IPv6 simultaneously. This requires that the two types be distinct and not conditionally typedef'ed to net_ipaddr_t.
2015-01-16 12:30:18 -06:00
bee89be4f4
Networking: Drivers can have both IPv4 and IPv6 addesses, but a socket can only only one or the other; The socket connnection structures need to include a union of IPv4 and IPv6 addresses for the local address binding and for the remote address connections
2015-01-16 10:01:54 -06:00
fe8b3c5220
Networking: More detangling of IPv6 logic. Next steps will be more invasive and will get moved to a branch
2015-01-16 08:51:18 -06:00
60e50ff3b5
Networking: More IPv6 detanglement
2015-01-15 13:08:28 -06:00
7d68c22d7f
Networking: Add support for IPv6 ioctls
2015-01-14 13:03:12 -06:00
6a3a2f466c
Update comments and README
2014-11-24 07:25:40 -06:00
aa9700c1ab
Update comments and read me
2014-11-23 12:52:18 -06:00
b36dbe1d89
Add logic to netdev_findbyaddr() to return the correct network device for the case where a broadcast address is used. This change caused trivial ripples through other files because additional parameters are required for netdev_findbyaddr() when CONFIG_NET_MULTINIC
2014-11-23 11:00:22 -06:00
fbd82712da
Add a comment
2014-11-22 09:08:31 -06:00
80fc094734
Make tcp_listener static scope; it is not used outside of tcp_conn.c
2014-11-22 07:14:17 -06:00
735aa4289a
Network: Add logic to get a default network device (for the case where are multiple devices). For INADDR_ANY
2014-11-21 14:14:39 -06:00
8b2b7afdae
Update TODO; Cosmetic changes to comments
2014-11-17 15:34:50 -06:00
57bcb28991
changes for clean build with Ethernet+SLIP
2014-11-16 11:27:53 -06:00
38754a3466
Completes basic changes to support per-device/per-link TCP receive window size
2014-11-16 11:15:21 -06:00
2340d46d20
Rename NET_LL_MTU to NET_DEV_MTU; rename d_llmtu to d_mtu
2014-11-16 10:42:19 -06:00
859748a94e
Completes conversion of CONFIG_NET_BUFIZE to CONFIG_NET_ETH/SLIP_MTU
2014-11-16 09:22:38 -06:00
ca7486d7f3
Add link MTU size to network device structure.
2014-11-16 08:49:14 -06:00
daa94934eb
Network: netdev_register() must assign the device name appropriately according to the link layer type
2014-11-15 14:21:11 -06:00
ebb6fd1e9c
Resove merge conflicts
2014-11-15 10:04:33 -06:00
2b758537ea
Network: Misc fixes for clean complete with both Ethernet and SLIP enabled
2014-11-15 08:55:50 -06:00
388ef8db1a
Netwoek: Ada a parameter to netdev_register() to indicate the link protocol supported by the driver. Use this value to replace some logic commited yesterday
2014-11-15 08:22:51 -06:00
057af36c1d
More of the PHY event notification logic change: Fix some compile errors when full feature is enabled; Add some missing ioctol logic
2014-08-16 15:04:09 -06:00
eb5e2e4b20
Finishes the ioctl definition to subscribe to PHY events. Revamp network ioctl signature to support arguments other than struct mii_ioctl_data.
2014-08-16 14:08:04 -06:00
Gregory Nutt