This does the following:
1. Fetches mkimage_imx8 (same used with imx9) source code
2. Fetches the ELE / AHAB binary
3. Extracts the ELE / AHAB binary
4. Compiles the mkimage with hostcc
5. Utilizes the mkimage tool to create a bootable SD image,
combining the ELE / AHAB image with the NuttX bootloader
6. dd is used to prepend empty space in place of BL31
7. Outputs sdimage.img which is a bootable binary
8. Removes all binaries, sources code images that have been
downloaded
Signed-off-by: Eero Nurkkala <eero.nurkkala@offcode.fi>
The Simple Boot feature for Espressif chips is a method of booting
that doesn't depend on a 2nd stage bootloader. Its not the
intention to replace a 2nd stage bootloader such as MCUboot and
ESP-IDF bootloader, but to have a minimal and straight-forward way
of booting, and also simplify the building.
This commit also removes deprecated code and makes this bootloader
configuration as default for esp32 targets and removes the need
for running 'make bootloader' command for it.
Signed-off-by: Almir Okato <almir.okato@espressif.com>
For newer devices, IDF bootloader is not supported because the
devices are able to boot directly into NuttX or use MCUBoot to
enable OTA and security features.
Need to distinguish between 32bit and 64bit registers, format the gdb reply message using struct.pack with correct format.
'<I' is used for 32bit registers, '<Q' for 64bit
Do not raise exeption for unrecognized registers in log, since they are
not used.
Signed-off-by: Xu Xingliang <xuxingliang@xiaomi.com>
*Note:* ldmd2 is ldc2-wrapper, allow using dmd frontend flags.
This support may be extended to gdc (gnu) if nuttx developers demand it
or are interested in it.
The Simple Boot feature for Espressif chips is a method of booting
that doesn't depend on a 2nd stage bootloader. Its not the
intention to replace a 2nd stage bootloader such as MCUboot and
ESP-IDF bootloader, but to have a minimal and straight-forward way
of booting, and also simplify the building.
This commit also removes deprecated code and makes this bootloader
configuration as default for esp32s2 targets and removes the need
for running 'make bootloader' command for it.
Signed-off-by: Almir Okato <almir.okato@espressif.com>
This provides a capable bootloader that may be run from OCRAM.
The OCRAM contains regions that are always zero, so the linker
file avoids those with best effort.
iMX9 infrastructure expects:
- 0x20480000 (Start of OCRAM, AHAB)
- 0x2049a000 (NuttX or SPL)
- 0x204e0000 (ARM Trustzone, not used)
When started from SD-card, the offsets are:
- 0x1f000 with AHAB
- 0xa000 without AHAB
Signed-off-by: Eero Nurkkala <eero.nurkkala@offcode.fi>
fix CI compilation errors:
github/workspace/sources/apps/database/sqlite/sqlite/configure: line 5204: /usr/bin/file: No such file or directory
/github/workspace/sources/apps/database/sqlite/sqlite/configure: line 10376: tclsh: command not found
/github/workspace/sources/apps/database/sqlite/sqlite/configure: line 10812: tclsh: command not found
/github/workspace/sources/apps/database/sqlite/sqlite/configure: line 10826: tclsh: command not found
configure: WARNING: Can't find Tcl configuration definitions
configure: WARNING: *** Without Tcl the regression tests cannot be executed ***
configure: WARNING: *** Consider using --with-tcl=... to define location of Tcl ***
make[4]: warning: -j0 forced in submake: resetting jobserver mode.
/github/workspace/sources/apps/database/sqlite/sqlite/tool/cktclsh.sh: 5: tclsh: not found
make[4]: *** [Makefile:793: has_tclsh84] Error 1
make[4]: Target 'sqlite3.c' not remade because of errors.
make[3]: *** [Makefile:52: context] Error 2
make[2]: *** [Makefile:53: /github/workspace/sources/apps/database/sqlite_context] Error 2
make[2]: Target 'context_all' not remade because of errors.
make[1]: *** [Makefile:175: context] Error 2
make: *** [tools/Unix.mk:452: /github/workspace/sources/apps/.context] Error 2
Signed-off-by: yinshengkai <yinshengkai@xiaomi.com>
This patch fixes the issue reported by PR #12345 where the file
path existent in the second line of each source file on NuttX.
Sometimes the path could be too long and could raise a nxstyle
issue during the CI test.
Signed-off-by: Alan C. Assis <acassis@gmail.com>
* Extends tools/configure.sh default appdir search paths.
* Search for apps in ../nuttx-apps and ../nuttx-apps.git locations.
* This allows -a parameter skip when nuttx-apps or nuttx-apps.git is used.
Signed-off-by Tomasz 'CeDeROM' CEDRO <tomek@cedro.info>
This fixes names of program entry and linker script files so that to
support building kernel mode apps using CMake and export package.
flat and protected mode should be the same as before.
Signed-off-by: Yanfeng Liu <yfliu2008@qq.com>
The Simple Boot feature for Espressif chips is a method of booting
that doesn't depend on a 2nd stage bootloader. Its not the
intention to replace a 2nd stage bootloader such as MCUboot and
ESP-IDF bootloader, but to have a minimal and straight-forward way
of booting, and also simplify the building.
This commit also removes deprecated code and makes this bootloader
configuration as default for esp32s3 targets and removes the need
for running 'make bootloader' command for it.
Other related fix, but not directly to Simple Boot:
- Instrumentation is required to run from IRAM to support it during
initialization. `is_eco0` function also needs to run from IRAM.
- `rtc.data` section placement was fixed.
- Provide arch-defined interfaces for efuses, in order to decouple
board config level from arch-defined values.
Signed-off-by: Almir Okato <almir.okato@espressif.com>
This disables the leading spaces removal for block comments to
avoid changing well-formatted blocks.
Based on test with uncrusity 0.72.0+dfsg1-2 on Ubuntu 22.04, the
leading spaces of block comment lines are unexpectedly removed by
current version w/o this patch.
Signed-off-by: Yanfeng Liu <yfliu2008@qq.com>
This patch supports listing configs for a given board like
- `tools/configure.sh -L sama5`
- `tools/configure.sh -L rv-virt`
- `tools/configure.sh -L virt`
Signed-off-by: Yanfeng Liu <yfliu2008@qq.com>
Extracting global variable information using scripts:
kasan_global.py:
1. Extract the global variable information provided by the -- param asan globals=1 option
2. Generate shadow regions for global variable out of bounds detection
Makefile:
1. Implement multiple links, embed the shadow area into the program, and call it by the Kasan module
Signed-off-by: W-M-R <mike_0528@163.com>
ERROR: pip's dependency resolver does not currently take into account all the packages that are installed. This behaviour is the source of the following dependency conflicts.
codechecker 6.23.1 requires PyYAML==6.0.1, but you have pyyaml 5.4.1 which is incompatible.
Signed-off-by: chao an <anchao@lixiang.com>
This adds support for multiple ELF files so that to help Kernel build
dump analysis with both nuttx and app ELF files.
Signed-off-by: Yanfeng Liu <yfliu2008@qq.com>
find: boards/risc-v/esp32c3/esp32c3-devkit/configs/cxx: No such file or directory
find: boards/risc-v/esp32c3/esp32c3-devkit/configs/wifi: No such file or directory
The video_controls.h is a public header file, and it is used by
videoio.h. So it should be moved to the include/sys directory.
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
function bloaty() Add -D CMAKE_INSTALL_PREFIX="${NUTTXTOOLS}"/bloaty.
Improves workflow execution time because it is now cached.
Changed reference file to calculate the hash for key of actions/cache@v4. Now it is darwin.sh.
The method of passing in parameters to memdump is modified and the
incoming address is added. After traversing the node to which the
address belongs, the memdump command will end.
Signed-off-by: wangmingrong <wangmingrong@xiaomi.com>
./helloxx_main.cxx:29:10: fatal error: cxxabi.h: No such file or directory
29 | #include <cxxabi.h>
| ^~~~~~~~~~
CONFIG_LIBCXXABI is turned on, but the library include is not linked to nuttx/include, causing the compilation to fail.
Signed-off-by: wangmingrong <wangmingrong@xiaomi.com>
This patch adds rv64 targets support and checked with gdb-multiarch
on Ubuntu. It also marks `-arch` parameter optional as it often can
be learnt from ELF file.
Signed-off-by: Yanfeng Liu <yfliu2008@qq.com>
This is a wrapper for apps/Make.defs or nuttx/Make.defs
Since apps/Make.defs include nuttx/Make.defs, we check if it the
apps dir is available and include it, otherwise we just include
nuttx/Make.defs and keep the old behavior.
This allows EXTRA_LIBS and some other system-wide tweaks be
applied in any apps and make it work with the nuttx Makefiles.
cibuild.sh -> modify scripts
platforms -> new folder +scripts
add header
tools/ci/platforms: Set the execute permissions on the updated files.
tools/ci/platforms/linux.sh: fix header
Corrected Apache Foundation copyright header.
tools/ci: Modify cibuild.sh to adapt to new platforms.
cibuild.sh -> modify scripts
platforms -> new folder +scripts
add header
tools/ci/platforms: Set the execute permissions on the updated files.
tools/ci: Modify cibuild.sh to adapt to new platforms.
cibuild.sh -> modify scripts
platforms -> new folder +scripts
add header
tools/ci/platforms: Set the execute permissions on the updated files.
tools/ci: Kept the common code in cibuild.sh.
Kept the common code in cibuild.sh.
tools/ci: Storing all Environment Variables in env.sh script.
Added in cibuild.sh this command "source "${CIWORKSPACE}"/tools/env.sh" to activate installed tools.
tools/ci: shared the tools path in cibuild.sh
Added in cibuild.sh enviroment variable "NUTTXTOOLS" for installed tools.
Removed bashisms from scripts darwin.sh, linux.sh, msys2.sh and ubuntu.sh.
tools/ci: Fixed build problems with macOS
Fix Error: /Users/runner/work/nuttx/nuttx/sources/tools/bloaty-src/build is not a directory
Eero Nurkkala