231b8518b7
NuttX: Ken Pettit: update licenses to Apache
...
Ken Pettit has submitted the ICLA and we can migrate the licenses
to Apache.
Sebastien Lorquet has submitted the ICLA and we can migrate the licenses
to Apache.
Gregory Nutt has submitted the SGA and we can migrate the licenses
to Apache.
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
2021-04-10 06:42:19 -05:00
fbb3cd660b
add simple wm8994 codec driver
2020-11-28 10:23:40 -03:00
c06c6ffa81
cxd56: add initial audio SRC implementation
...
Add basic sample rate conversion to the CXD56 Spresense audio
driver using libsamplerate. Currently conversion is only done
during playback and all output is fixed at 48 kHz.
Issues:
- 16 kHz SRC has glitches (unless data dump is enabled)
- 44.1 kHz SRC gets stuck
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
2020-11-19 07:29:07 +09:00
8da4b02350
drivers/audio: Add CS4344 driver.
2020-06-05 15:54:17 -03:00
57e8f0451a
cxd56: add initial Nuttx audio driver
...
Adds an initial Nuttx audio driver supporting the Spresense CXD56.
Being a work in progress the driver has a number of limitations:
- Audio playback only, no recording yet.
- Only 16 bit stereo playback is supported.
- In practice only 48kHz playback is supported due to missing SRC.
- Configure driver in "Device Drivers --> Audio Device Support".
2020-04-16 12:50:05 -06:00
85a993999e
drivers/audio/audio_i2s.c: Add audio_i2s device driver.
2018-08-27 08:52:08 -06:00
eb02b28428
drivers/audio: Move the I2S character driver to a dedicated folder.
2018-08-27 07:26:22 -06:00
51b19d5f38
Merged in masayuki2009/nuttx.nuttx/lc823450 (pull request #531 )
...
lc823450-xgevk audio support
* arch/arm/src/lc823450: Add IPL2 support
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
* configs/lc823450-xgevk: Add IPL2 support
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
* libc/audio: Fix compilation error in lib_buffer.c
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
* drivers/audio: Add WM8774 support
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
* arch/arm/src/lc823450: Add I2S support
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
* configs/lc823450-xgevk: Add WM8774 support
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
Approved-by: Gregory Nutt <gnutt@nuttx.org>
2017-11-08 12:25:13 +00:00
9b2a8e8c0e
Rename CONFIG_AUDIO_DEVICES to CONFIG_DRIVERS_AUDIO to conform better to the evolving configuration naming standard.
2017-09-12 14:10:15 -06:00
53ef64aae6
drivers/audio: Fix naming of configurations to be compliant for vs1053 audio driver.
2017-08-24 11:11:06 -06:00
4ab2a3661e
STM32F4: add cs43l22 audio driver and i2s driver
2017-05-21 14:14:09 -06:00
8b99dd4cdb
drivers/audio: Add Audio Tone Generator for NuttX
2016-08-16 13:20:05 -06:00
72b739fbcb
WM8904: Add logic to analyze BCLK setup
2014-08-03 17:11:38 -06:00
f4bc0ad99a
WM8904: Add an option to control WM8904 register dumping
2014-08-02 06:52:42 -06:00
e59bb45b33
Add debug logic to dump WM8904 registers
2014-08-01 18:07:20 -06:00
ca7d7c34ce
Audio: Add a NULL audio device that can be used to simply unit-level testing of audio decoders
2014-07-23 10:12:32 -06:00
3b8c4a399d
Framework for a WM8904 audio driver. The initial driver check-in is simply Ken Pettit's VS1053 driver forced to compile with only WM8904 definitions
2014-07-18 15:35:12 -06:00
f5c82c0df9
Add an I2S character driver. This driver is only intended to support I2S testing and is inappropriate for use with real I2S devices
2013-11-10 10:24:09 -06:00
5fe465749f
Updated VS1053 audio driver from Ken Pettit
2013-10-27 08:00:16 -06:00
5b86207177
Add audio/ sub-syste, include/nuttx/audio.h interface, and drivers/audio/vs1053.c driver to NuttX. From Ken Pettit
2013-05-19 15:12:28 -06:00
Alin Jerpelea