86239d4a73
Experimental change to STM32 Ethernet driver a success. Porting change to all other Ethernet drivers.
2017-03-03 14:45:09 -06:00
32383556fd
PIC32MZ: Pin IRQ logic no longer returns the xcpt_t oldhandler. There value is useless and dangerous after the recent changes to interrupt argument passing.
2017-03-02 12:23:45 -06:00
1564b384e1
PIC32MX: Pin IRQ logic no longer returns the xcpt_t oldhandler. There value is useless and dangerous after the recent changes to interrupt argument passing.
2017-03-02 12:10:05 -06:00
a581e9206d
Convert remaining serial drivers to use use irq_attach.
2017-02-27 10:27:14 -06:00
b3222bbc8a
irq_dispatch: Add argument pointer to irq_dispatch
...
Provide a user defined callback context for irq's, such that when
registering a callback users can provide a pointer that will get
passed back when the isr is called.
2017-02-27 06:27:56 -06:00
8ee2e8d8b0
Most Ethernet drviers: Check if the poll timer is running before restarting it at the end of each TX.
2017-02-24 15:58:17 -06:00
1d290c2b37
setvbuf: Add support for disabling I/O buffering. Initially cut; untested.
2017-02-09 09:24:44 -06:00
62a1f6f110
up_timer_initialize() is named incorrectly. The prefix should be the architecture name, not up_ since it is private to the architecture. up_timerisr() is similarly misnamed and should also be private since it is used only with the xyz_timerisr.c files. Also updat TODO list.
2017-02-07 10:35:04 -06:00
3ed091376c
In all implementations of _exit(), use enter_critical_section() vs. disabling local interrupts.
2017-01-13 11:08:24 -06:00
13d00344c9
Add configuration to prevent selection of Windows native toolchains when using Ubuntu under Windows 10
2017-01-02 07:16:47 -06:00
3a0413c048
Back out most of 34be3e7c3c and update README again. Windows native tools cannot be used with Ubuntu under Windows 10 now. For Cygwin, that support depends on the 'cygpath -w' tool to convert POSIX paths to Windows paths. There is no corresponding tool for Ubuntu under Windows 10.
2017-01-01 16:29:03 -06:00
34be3e7c3c
Add configuration support for builds with Ubuntu under Windows 10
2017-01-01 15:34:23 -06:00
7467329a98
Eliminate CONFIG_NO_NOINTS. Lots of files changed -> lots of testing needed.
2016-12-03 16:28:19 -06:00
41e35c88bf
eZ80 Ethernet now supports CONFIG_NET_NOINTS
2016-12-03 10:43:35 -06:00
eba1e076ec
PIC32MX/Z Ethernet: Now supports CONFIG_NET_NOINT
2016-12-03 09:50:14 -06:00
934aded293
arch/: Adapt all Ethernet drivers to work as though CONFIG_NET_MULTIBUFFER were set. Remove all references to CONFIG_NET_MULTIBUFFER
2016-11-29 16:06:48 -06:00
b0dffdc2ca
Fix a number of header files with mismatched 'extern C {' and '}'
2016-11-05 07:25:05 -06:00
912fe06a86
Add architecture-specific inttypes.h
2016-10-27 16:01:38 -04:00
d41008e220
Update some header commments
2016-08-06 18:16:31 -06:00
4b4dbc79a2
Move driver related prototypes out of include/nuttx/fs/fs.h and into new include/drivers/drivers.h
2016-07-20 13:15:37 -06:00
d5388eca05
devrandom_register() must be called before devurandom_register()
2016-07-18 11:24:04 -06:00
1660329d06
Rename up_rnginitialize to devrandom_register
2016-07-18 10:55:37 -06:00
6cefbc0c3f
This change provides an option to add /dev/urandom to all architectures. The pseudo-random algorithm I choose strikes an arguably-good balance between being "random" and small/fast enough for 8/16 bit MCUs. It’s the well-documented xorshift128 algorithm. It has an internal state of 128 bits that can be [re-]seeded with a write.
2016-07-17 06:42:26 -06:00
e7f0a56498
Correct some comments
2016-07-15 13:13:53 -06:00
7b298a828d
up_pminitialize() needs to be called from instances of up_initialize()
2016-07-15 13:11:28 -06:00
d3b3c71d97
All architectures: Add logic to automatically register /dev/ptmx a boot time
2016-07-15 11:54:41 -06:00
5118264e6c
Rename CONFIG_SYSLOG_CONSOLE to CONFIG_CONSOLE_SYSLOG
2016-06-21 09:35:51 -06:00
62d8f839c7
SYSLOG: Now a two phase initialization. Some SYSLOG channels cannot be initialized until later in the bringup
2016-06-21 07:52:24 -06:00
7f16548f57
Replaces last three commits. Does the same thing, but does it in a way that does not change the usage model.
2016-06-21 05:26:08 -06:00
c05da80a27
Eliminate a warning
2016-06-20 22:54:58 -06:00
505ca542e8
Remove some last traces of lowvsyslog that were missed; Add a SYSLOG emergency channel for handling assertion output more cleanly
2016-06-20 16:11:50 -06:00
2a751068e6
Without lowsyslog() *llerr() is not useful. Eliminate and replace with *err().
2016-06-20 12:44:38 -06:00
43eb04bb8f
Without lowsyslog() *llinfo() is not useful. Eliminate and replace with *info().
2016-06-20 11:59:15 -06:00
d40a473f72
Without lowsyslog() *llwarn() is not useful. Eliminate and replace with *warn().
2016-06-20 09:37:08 -06:00
5b2aa7bf99
Remove all traces of CONFIG_SYSLOG
2016-06-19 13:59:43 -06:00
0f18f3bd15
Move RAMLOG initialize from up_initialilize.c files to syslog_initialize(). up_initialize.c files now call syslog_initialize() unconditionally
2016-06-19 09:39:21 -06:00
ac18dc27ca
Common/Calypso/C5471: Convert *err() to either *info() or add ERROR:, depending on if an error is reported
2016-06-17 15:22:48 -06:00
b39e53391d
Add underscore at beginning of alert() as well
2016-06-16 12:38:05 -06:00
0c8c7fecf0
Add _ to the beginning of all debug macros to avoid name collisions
2016-06-16 12:33:32 -06:00
6f08216621
Centralize definitions associated with CONFIG_DEBUG_SYSCALL
2016-06-16 08:12:38 -06:00
ba03134bed
Centralize definitions associated with CONFIG_DEBUG_SPI
2016-06-15 10:41:13 -06:00
a97d3ae707
Centralize definitions associated with CONFIG_DEBUG_GPIO
2016-06-15 09:20:23 -06:00
64fa0ab51f
Fix Kconfig dependency
2016-06-14 12:36:59 -06:00
080aa07110
arch/mips/: Change some *err() message to *info() messages if what was a *dbg() message does not indicate and error condition.
2016-06-14 12:34:29 -06:00
a98bc05f65
New debug macro: alert(). This is high priority, unconditional output and is used to simplify and stanardize crash error reporting.
2016-06-14 09:07:53 -06:00
0f249016a0
Eliminate some warnings
2016-06-13 14:01:32 -06:00
d5275e48d0
Eliminate some warnings
2016-06-13 13:16:03 -06:00
a1469a3e95
Add CONFIG_DEBUG_ERROR. Change names of *dbg() * *err()
2016-06-11 15:50:49 -06:00
e99301d7c2
Rename *lldbg to *llerr
2016-06-11 14:55:27 -06:00
1cdc746726
Rename CONFIG_DEBUG to CONFIG_DEBUG_FEATURES
2016-06-11 14:14:08 -06:00
Gregory Nutt