This PR adds the existing Goodix GT9XX Touch Panel Driver to the Bringup Function for PINE64 PinePhone.
With this PR, LVGL Touchscreen Apps will respond to Touch Input on PinePhone.
### Modified Files
`boards/arm64/a64/pinephone/src/pinephone_bringup.c`: Added GT9XX Touch Panel Driver to PinePhone Bringup Function
`boards/arm64/a64/pinephone/src/Makefile`: Added `pinephone_touch.c` to the Makefile
`include/nuttx/input/gt9xx.h`: Fixed a comment in GT9XX Touch Panel Driver
### New Files
`boards/arm64/a64/pinephone/src/pinephone_touch.c`, `pinephone_touch.h`: Register GT9XX Touch Panel Driver on PinePhone
`boards/arm64/a64/pinephone/configs/lvgl/defconfig`: Added PinePhone Board Config `lvgl` to support LVGL Touchscreen Apps
### Updated Documentation
`Documentation/platforms/arm/a64/boards/pinephone/index.rst`: Added PinePhone Board Config `lvgl` for LVGL Touchscreen Apps
The memalign is special to multiple mempool because multiple mempool
doesn't support split and shrink chunk operate. So When you alloc a
memory block and find an aligned address in this block, you need to
occupy 8 bytes before the address to save the address of the padding
size and pool to ensure correct use in realloc and free operations.
So we will use bit1 in the previous address of the address to represent
that it is applied by memalign.
Signed-off-by: dongjiuzhu1 <dongjiuzhu1@xiaomi.com>
This delta describes the relationship between the block size of each
mempool in multiple mempool by user initialized. It is automatically
detected by the mempool_multiple_init function. If the delta is not
equal to 0, the block size of the pool in the multiple mempool is an
arithmetic progressions, otherwise it is an increasing progressions.
Signed-off-by: dongjiuzhu1 <dongjiuzhu1@xiaomi.com>
Let's specify size instead of number, so that we can unify the size of
expansion memory in the multiple mempool.
Signed-off-by: dongjiuzhu1 <dongjiuzhu1@xiaomi.com>
the crash backtrace:
kasan_report (addr=0xf3d02fd4, size=4, is_write=false) at
kasan/kasan.c:106
0x5658518d in __asan_loadN_noabort (addr=0xf3d02fd4, size=4) at
kasan/kasan.c:300
0x565851ee in __asan_load4_noabort (addr=0xf3d02fd4) at
kasan/kasan.c:334
0x56580b02 in sq_remfirst (queue=0xf3d02b08) at
queue/sq_remfirst.c:45
0x565e0e0b in mempool_alloc (pool=0xf3d02aec) at
mempool/mempool.c:161
0x566033d2 in mempool_multiple_alloc (mpool=0xf3d02a30, size=16) at
mempool/mempool_multiple.c:147
Signed-off-by: dongjiuzhu1 <dongjiuzhu1@xiaomi.com>
- Also remove the nuttx private shm.h file nuttx/mm/shm.h, which became redundant
- Also remove the gran allocator initialization/release in binfmt since common
vpage allocator is initialized in group_create/group_leave
Signed-off-by: Jukka Laitinen <jukkax@ssrc.tii.ae>
The dependency should be vice versa; the MM_SHM should depend on the
existence of the virtual memory range allocator.
Create a new CONFIG flag CONFIG_ARCH_VMA_MAPPING, which will define that
there is a virtual memory range allocator. Make MM_SHM select that flag
Signed-off-by: Jukka Laitinen <jukkax@ssrc.tii.ae>
Replace static gs_vaddr with a new dynamic mapping list. Collecting all
this kind of virtual memory mappings into a single structure makes
things more consistent.
This still leaves the task group specific granule alloocator, gs_handle,
in the task group
Signed-off-by: Jukka Laitinen <jukkax@ssrc.tii.ae>
The task_group specific list can be used to store information about
mmappings.
For a driver or filesystem performing mmap can also enable munmap by
adding an item to this list using mm_map_add(). The item is then
returned in the corresponding munmap call.
Signed-off-by: Jukka Laitinen <jukkax@ssrc.tii.ae>
and Fix include/nuttx/mm/map.h:55:28: error: 'struct task_group_s' declared inside parameter list will not be visible outside of this definition or declaration
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
change 1: rename sysview.c to note_sysview.c
change 2: add note_ prefix to sysview's public function
Signed-off-by: yinshengkai <yinshengkai@xiaomi.com>
since mmap may exist in block_operations, but truncate may not,
moving mmap beforee truncate could make three struct more compatible
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
ECG sensors usually output some status info besides ECG data, such as lead and fast-recovery status. Thus a new member "status" is added into sensor_ecg struct.
Signed-off-by: liucheng5 <liucheng5@xiaomi.com>
- Add mmap into file_operations and remove it from ioctl definitions.
- Add mm_map structure definitions to support future unmapping
- Modify all drivers to initialize the operations struct accordingly
Signed-off-by: Jukka Laitinen <jukkax@ssrc.tii.ae>
- Add truncate into file_operations
- Move truncate to be common for mountpt_operations and file_operations
- Modify all drivers to initialize the operations struct accordingly
Signed-off-by: Jukka Laitinen <jukkax@ssrc.tii.ae>
This is preparation for flushing streams from user space, like it should
be done.
- Move tg_streamlist (group, kernel space) ->
ta_streamlist (TLS, user space)
- Access stream list via tg_info in kernel
- Access stream list via TLS in user space
- Remove / rename nxsched_get_streams -> lib_getstreams
- Remove system call for nxsched_get_streams
Lee Lup Yuen