83cdb0c552
Squashed commit of the following:
...
libc/semaphore: Add nxsem_getvalue() which is identical to sem_getvalue() except that it never modifies the errno variable. Changed all references to sem_getvalue in the OS to nxsem_getvalue().
sched/semaphore: Rename all internal private functions from sem_xyz to nxsem_xyz. The sem_ prefix is (will be) reserved only for the application semaphore interfaces.
libc/semaphore: Add nxsem_init() which is identical to sem_init() except that it never modifies the errno variable. Changed all references to sem_init in the OS to nxsem_init().
sched/semaphore: Rename sem_tickwait() to nxsem_tickwait() so that it is clear this is an internal OS function.
sched/semaphoate: Rename sem_reset() to nxsem_reset() so that it is clear this is an internal OS function.
2017-10-03 12:52:31 -06:00
b274a97840
Miscellaneous fixes from astyle tool.
2017-08-14 17:19:27 -06:00
6b6d7ce9b9
sig_timedwait: Pending signal structure used after it has been releasd. From anonymous Bitbucket Issue 59.
2017-07-27 12:32:47 -06:00
2245dddaf9
Break up some long lines
2017-06-14 13:42:56 -06:00
c57d49f420
clock: Add new type ssystime_t for relative 64-bit ticks, change ticks<->time conversion functions to use ssystime_t
2017-04-21 08:51:31 -06:00
54b1f5ce2a
Merged in masayuki2009/nuttx.nuttx/remove_unused_variable (pull request #233 )
...
Remove unused variable
Approved-by: Gregory Nutt
2017-03-02 12:39:32 +00:00
094795e0ed
Review parameter usage in sigtimedwait(); update some comments.
2017-03-02 06:39:05 -06:00
237e041fba
Remove an unused variable when calling sigwaitinfo()
2017-03-02 13:14:00 +09:00
4043239cfc
Remove an unused variable when calling sigtimedwait()
2017-03-02 13:13:53 +09:00
dca77fa06a
sigtimedwait: When timer expires, up_unblock_task() is called. This is okay in the single CPU case because interrupts are disable in the timer interrupt handler. But it is insufficient in the SMP case. enter_ and leave_critical_section() must be called in order to manage spinlocks correctly.
2017-02-24 10:07:23 -06:00
b52e4e5ecd
Move cancellation point definitions to their own header file.
2016-12-10 09:08:26 -06:00
bc3ca25cc7
Cancellation points: Close up some logic to eliminte some race conditions.
2016-12-10 08:36:58 -06:00
7fce8022c6
Finishes all cancellation point logic
2016-12-09 16:50:34 -06:00
e24f281401
This commit adds a new internal interfaces and fixes a problem with three APIs in the SMP configuration. The new internal interface is sched_cpu_pause(tcb). This function will pause a CPU if the task associated with 'tcb' is running on that CPU. This allows a different CPU to modify that OS data stuctures associated with the CPU. When the other CPU is resumed, those modifications can safely take place.
...
The three fixes are to handle cases in the SMP configuration where one CPU does need to make modifications to TCB and data structures on a task that could be running running on another CPU. Those three cases are task_delete(), task_restart(), and execution of signal handles. In all three cases the solutions is basically the same: (1) Call sched_cpu_pause(tcb) to pause the CPU on which the task is running, (2) perform the necessary operations, then (3) call up_cpu_resume() to restart the paused CPU.
2016-11-20 07:57:18 -06:00
5ea77118aa
Explicitly initialize the group tg_exitsem with sem_init(). The existing logic worked because the correct initialization value is all zero, but it is better to initialize the semaphore explicitly. Noted by Jouko Holopainen.
2016-08-10 07:38:07 -06:00
13cac3b592
sched/: Change some *err() message to *info() messages if what was a *dbg() message does not indicate and error condition.
2016-06-11 16:42:42 -06:00
a1469a3e95
Add CONFIG_DEBUG_ERROR. Change names of *dbg() * *err()
2016-06-11 15:50:49 -06:00
1cdc746726
Rename CONFIG_DEBUG to CONFIG_DEBUG_FEATURES
2016-06-11 14:14:08 -06:00
0fb035f76b
Standardize some naming in code section comments
2016-02-21 18:09:04 -06:00
6d97249348
Trivial, cosmetic changes
2016-02-18 14:56:48 -06:00
7d9287958f
Minor simplication to last commit; Update TODO list
2016-02-18 09:21:43 -06:00
52fbbaf778
1. SMP: Fix an assertion. SMP-specific change accidentally made in non-SMP code
...
2. Move list of signal actions from the task TCB to the task group. Signal handlers are a property of the entire task group and not of individual threads in the group. I know, I preferred it the other way too but this is more compliant with POSIX.
2016-02-18 08:34:54 -06:00
269c242f7b
Update TODO list
2016-02-17 16:51:58 -06:00
6e3107650d
nuttx/sched: Replace irqsave() with enter_critical_section(); replace irqrestore() with leave_critical_section()
2016-02-14 08:17:46 -06:00
74db48202e
sched/: Replace explict references to g_readytorun with indirect references via the this_task() macro
2016-02-06 17:44:41 -06:00
f348e68069
Update to use 64-bit timer when available
2016-01-21 11:54:26 -06:00
c1fff4706c
signals: Adds a very limited, minimal implementation for SIGEV_THREAD
2015-12-30 15:01:14 -06:00
f45e2a247e
Cosmetic fix to comment
2015-12-11 10:06:40 -06:00
79d554939e
sched/: Fix some spacing issues
2015-10-07 19:59:14 -06:00
5b51a9fcdd
Standardize the width of all comment boxes in C files
2015-10-02 17:43:18 -06:00
cb9e27c3b0
Standardize naming used for public data and function groupings
2015-10-02 16:30:35 -06:00
768d892188
Add si_errno to siginfo_t
2015-08-14 10:10:32 -06:00
4adda9d428
Fix numerous typos in configuration variable names. Tracked down by Alan Carvalho de Assis
2015-05-23 17:08:35 -06:00
3adcae8ffb
Update the type passed to watchdog timer handlers. Using uint32_t is a problem for 64-bit machines.
2015-05-18 08:53:42 -06:00
cc77a28f40
If HAVE_GROUP_MEMBERS is not defined, then pthread_kill() really is the same as kill()
2015-05-13 20:34:21 -06:00
4417728955
Re-implemened pthread_kill(). It as just a simple wrapper around kill() but since the correct dispatching of singles for multi-threaded task groups has been implemented, calling kill() does no work. The corrected implementation of pthread_kill() will direct the signal specifically to the specific pthread and no other.
2015-05-13 14:43:43 -06:00
b4423c1eed
Make some file section headers more consistent with standard
2015-04-08 06:47:36 -06:00
322f9f401c
Simplify how C source files are selected in the build
2014-10-07 07:42:36 -06:00
47d55c28dc
Mostly cosmetic changes
2014-09-04 10:28:38 -06:00
1780810d3d
Rename kmalloc to kmm_malloc for consistency
2014-08-31 17:26:36 -06:00
e3ff0689bb
Rename CONFIG_NUTTX_KERNEL to CONFIG_BUILD_PROTECTED; Partially integrate new CONFIG_BUILD_KERNEL
2014-08-29 14:47:22 -06:00
ad9b3f8ab8
wdog.h does not contain any application interface, only internal OS interface. Further, it is non-standard. Move wdog.h from include/ to include/nuttx. For the same reason, move the description of the watchdog timer interfaces from the Users Guide to the Porting Guide.
2014-08-21 11:16:55 -06:00
e1769b22f1
Remove os_internal.h it has been replace by several new header files under sched/. There have been some sneak inclusion paths via os_internal.h, so expect a few compilation errors for some architectures
2014-08-08 18:39:28 -06:00
d798dd37a7
Replace os_internal.h with sched/sched.h in files that actually reference something in sched.h
2014-08-08 17:53:55 -06:00
224ee05957
Move a few files in sched/ that did not seem to have a home to sched/signal and sched/task
2014-08-08 16:57:47 -06:00
d4b56eb3cc
Move clock functions from sched/ to sched/clock
2014-08-08 14:43:02 -06:00
0f318e9249
Move watchdog functions from sched/ to sched/wdog
2014-08-08 14:21:48 -06:00
4ff17b3904
Move group logic from sched/ to sched/group
2014-08-08 14:06:42 -06:00
e10a23ae50
Move environment files from sched/ to sched/environ
2014-08-08 13:53:29 -06:00
cb79407ced
Move all pthread files from sched/ to sched/pthread
2014-08-08 12:55:02 -06:00
Gregory Nutt