OrgApache/incubator-nuttx
OrgApache
/
incubator-nuttx
mirror of https://github.com/apache/incubator-nuttx.git
1
0
Fork 0
Code Issues Releases Wiki Activity
49,301 Commits 18 Branches 185 Tags 383 MiB
Commit Graph

13 Commits

Author SHA1 Message Date
luojun1234 ff3733b5b5 Support fragmentation and reassembly 
Signed-off-by: luojun1 <luojun1@xiaomi.com>
 2023-01-17 14:01:37 +08:00
Zhe Weng 7f9cf184e5 net/devif_loopback: Add robustness to avoid infinite loop 
When ipv4_input/ipv6_input called by devif_loopback writes wrong data into buffer (another bug we're fixing), the else block does nothing but only record the 'dropped' statistic, then infinite loop happens.

Refers to previous lo device with dropping logic:
https://github.com/apache/nuttx/blob/releases/11.0/drivers/net/loopback.c#L178-L180

Signed-off-by: Zhe Weng <wengzhe@xiaomi.com>
 2022-12-24 16:20:17 +08:00
chao an 62004a28a6 net/d_buf: remove d_buf reference from l3/l4 
l3/l4 stack will decouple the reference of d_buf gradually, Only legacy
devices still retain d_buf support, new net devices will use d_iob

Signed-off-by: chao an <anchao@xiaomi.com>
 2022-12-04 20:37:14 +08:00
chao an 34d2cde8a8 net/l2/l3/l4: add support of iob offload 
1. Add new config CONFIG_NET_LL_GUARDSIZE to isolation of l2 stack,
   which will benefit l3(IP) layer for multi-MAC(l2) implementation,
   especially in some NICs such as celluler net driver.

new configuration options: CONFIG_NET_LL_GUARDSIZE

CONFIG_NET_LL_GUARDSIZE will reserved l2 buffer header size of
network buffer to isolate the L2/L3 (MAC/IP) data on network layer,
which will be beneficial to L3 network layer protocol transparent
transmission and forwarding

------------------------------------------------------------
Layout of frist iob entry:

        iob_data (aligned by CONFIG_IOB_ALIGNMENT)
            |
            |                  io_offset(CONFIG_NET_LL_GUARDSIZE)
            |                                |
            -------------------------------------------------
      iob   |            Reserved            |    io_len    |
            -------------------------------------------------

-------------------------------------------------------------
Layout of different NICs implementation:

        iob_data (aligned by CONFIG_IOB_ALIGNMENT)
            |
            |                 io_offset(CONFIG_NET_LL_GUARDSIZE)
            |                                |
            -------------------------------------------------
 Ethernet   |       Reserved    | ETH_HDRLEN |    io_len    |
            ---------------------------------|---------------
 8021Q      |   Reserved  | ETH_8021Q_HDRLEN |    io_len    |
            ---------------------------------|---------------
 ipforward  |            Reserved            |    io_len    |
            -------------------------------------------------

--------------------------------------------------------------------

2. Support iob offload to l2 driver to avoid unnecessary memory copy

Support send/receive iob vectors directly between the NICs and l3/l4
stack to avoid unnecessary memory copies, especially on hardware that
supports Scatter/gather, which can greatly improve performance.

new interface to support iob offload:

  ------------------------------------------
  |    IOB version     |     original      |
  |----------------------------------------|
  |  devif_iob_poll()  |   devif_poll()    |
  |       ...          |       ...         |
  ------------------------------------------

--------------------------------------------------------------------

1> NIC hardware support Scatter/gather transfer

TX:

                tcp_poll()/udp_poll()/pkt_poll()/...(l3|l4)
                           /              \
                          /                \
devif_poll_[l3|l4]_connections()     devif_iob_send() (nocopy:udp/icmp/...)
           /                                   \      (copy:tcp)
          /                                     \
  devif_iob_poll("NIC"_txpoll)                callback() // "NIC"_txpoll
                                                  |
                            dev->d_iob:           |
                                                ---------------         ---------------
                             io_data       iob1 |  |          |    iob3 |  |          |
                                    \           ---------------         ---------------
                                  ---------------  |       --------------- |
                             iob0 |  |          |  |  iob2 |  |          | |
                                  ---------------  |       --------------- |
                                     \             |          /           /
                                        \          |       /           /
                                   ----------------------------------------------
                    NICs io vector |    |    |    |    |    |    |    |    |    |
                                   ----------------------------------------------

RX:

  [tcp|udp|icmp|...]ipv[4|6]_data_handler()(iob_concat/append to readahead)
                    |
                    |
      [tcp|udp|icmp|...]_ipv[4|6]_in()/...
                    |
                    |
          pkt/ipv[4/6]_input()/...
                    |
                    |
     NICs io vector receive(iov_base to each iobs)

--------------------------------------------------------------------

2> CONFIG_IOB_BUFSIZE is greater than MTU:

TX:

"(CONFIG_IOB_BUFSIZE) > (MAX_NETDEV_PKTSIZE + CONFIG_NET_GUARDSIZE + CONFIG_NET_LL_GUARDSIZE)"

                tcp_poll()/udp_poll()/pkt_poll()/...(l3|l4)
                           /              \
                          /                \
devif_poll_[l3|l4]_connections()     devif_iob_send() (nocopy:udp/icmp/...)
           /                                   \      (copy:tcp)
          /                                     \
  devif_iob_poll("NIC"_txpoll)                callback() // "NIC"_txpoll
                                                  |
                                             "NIC"_send()
                          (dev->d_iob->io_data[CONFIG_NET_LL_GUARDSIZE - NET_LL_HDRLEN(dev)])

RX:

  [tcp|udp|icmp|...]ipv[4|6]_data_handler()(iob_concat/append to readahead)
                    |
                    |
      [tcp|udp|icmp|...]_ipv[4|6]_in()/...
                    |
                    |
          pkt/ipv[4/6]_input()/...
                    |
                    |
     NICs io vector receive(iov_base to io_data)

--------------------------------------------------------------------

3> Compatible with all old flat buffer NICs

TX:
                tcp_poll()/udp_poll()/pkt_poll()/...(l3|l4)
                           /              \
                          /                \
devif_poll_[l3|l4]_connections()     devif_iob_send() (nocopy:udp/icmp/...)
           /                                   \      (copy:tcp)
          /                                     \
  devif_iob_poll(devif_poll_callback())  devif_poll_callback() /* new interface, gather iobs to flat buffer */
       /                                           \
      /                                             \
 devif_poll("NIC"_txpoll)                     "NIC"_send()(dev->d_buf)

RX:

  [tcp|udp|icmp|...]ipv[4|6]_data_handler()(iob_concat/append to readahead)
                    |
                    |
      [tcp|udp|icmp|...]_ipv[4|6]_in()/...
                    |
                    |
               netdev_input()  /* new interface, Scatter/gather flat/iob buffer */
                    |
                    |
          pkt/ipv[4|6]_input()/...
                    |
                    |
    NICs io vector receive(Orignal flat buffer)

3. Iperf passthrough on NuttX simulator:

  -------------------------------------------------
  |  Protocol      | Server | Client |            |
  |-----------------------------------------------|
  |  TCP           |  813   |   834  |  Mbits/sec |
  |  TCP(Offload)  | 1720   |  1100  |  Mbits/sec |
  |  UDP           |   22   |   757  |  Mbits/sec |
  |  UDP(Offload)  |   25   |  1250  |  Mbits/sec |
  -------------------------------------------------

Signed-off-by: chao an <anchao@xiaomi.com>
 2022-12-03 11:47:04 +08:00
chao an 823252261f net/devif: remove link layer length from loopback 
Add link layer length in loopback is unnecessary after below change checkin:

 | commit 6fa60627eb
 | Author: chao an <anchao@xiaomi.com>
 | Date:   Sun Nov 27 02:13:21 2022 +0800
 |
 |     net/devif/ip: build l2 header on the IP layer
 |
 |     Signed-off-by: chao an <anchao@xiaomi.com>

Signed-off-by: chao an <anchao@xiaomi.com>
 2022-11-30 10:07:14 +08:00
chao an a8d3286258 net: move device buffer define to common header 
Signed-off-by: chao an <anchao@xiaomi.com>
 2022-10-28 00:32:16 -04:00
Xiang Xiao ae356001cf Change all files come from Xiaomi/Pinecone to Apache License 2.0 
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
 2020-08-22 17:37:21 -06:00
Xiang Xiao f618de9c97 Fix nxstyle warning 
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
 2020-08-08 17:30:26 -03:00
Juha Niskanen f3490e42c3 Fix typos in comments 2020-03-03 09:11:57 -06:00
Xiang Xiao 68951e8d72 Remove exra whitespace from files (#189) 
* Remove multiple newlines at the end of files
* Remove the whitespace from the end of lines
 2020-01-31 09:24:49 -06:00
Gregory Nutt bfa8c362c6 net/devif/devif_loopback.c: Fix warning: implicit declaration of memcmp. 2018-11-11 11:56:37 -06:00
Gregory Nutt a85f0e4cd5 networking: Update some comments to correct the naming used for the link layer. 2018-10-20 06:35:39 -06:00
Gregory Nutt 5d042b41c3 Rename the file devif_loopbackout.c to devif_loopback.c 2018-08-25 08:36:02 -06:00