fca919f3d2
Networking: Fix some compilation issues noted with network is build with CONFIG_BUILD_KERNEL
2015-07-05 11:18:56 -06:00
342f5fe33d
Fix references to the no-longer-existent misc/ directory in comments, README files, and documentation
2015-06-28 08:08:57 -06:00
0ad53183e1
Networking: Fix a compile problem introduced in NuttX-7.6 when CONFIG_NET_SENDFILE=y
2015-06-24 14:52:57 -06:00
ed9c45bcef
Networking: Fix compilation error if IPv6 is enabled
2015-06-17 15:00:04 -06:00
e22deff1ab
TCP connect. Move the location where the socket is marked as connected in order to avoid a potential race condition
2015-05-31 12:24:24 -06:00
b493dde4cf
TCP networking: In the TCP connection operation, it was trying to setup the network monitor BEFORE the socket was successfully connected. This, of course, has ALWAYS failed because the socket is not yet connected and the TCP state is not yet correct for a connected socket. However, because of other changes net_startmonitor(0 no returns a failure condition that causes worse problems when trying to connect. The fix is to move the logic that starts the network monitor to AFTER the socket has been successfully connected.
2015-05-31 11:35:28 -06:00
a47a0d237c
Costmetic changes to networking logic
2015-05-31 10:29:53 -06:00
33085cb309
Networking: The network device list was protected by a re-entrant semaphore. With the recent change to support network device callback, the network stack needs to access the network device list too. Some drivers, however, run the network stack from the interrupt level -- this is bad but a fact in the current state. Of course,those drivers are unable to take the semaphore and will assert.
...
The solution here is to eliminate the device devices semaphore altogether. This eliminates netdev_semtake() and netdev_semgive() and replaces them with net_lock() and net_unlock() which have larger scope as needed for this purpose.
2015-05-31 08:34:03 -06:00
cc340aaa92
TCP networking: Since the network monitor now allocates a callback structure, it is critical to make sure that the networking monitor is stopped when the socket is closed or any other loss of connection. What was innocuous before would now be a memory leak
2015-05-30 11:49:55 -06:00
8b029fbbee
TCP networking: Hook the network monitor into the device event notification logic
2015-05-30 11:29:47 -06:00
04a661a97c
TCP networking: Add support for network driver events
2015-05-30 09:12:27 -06:00
0bdf2d5360
UDP Networking: Misc fixes to get the last changes working + cleanup
2015-05-29 14:32:56 -06:00
2102892e7b
Fix missing file and some compilation errors from the last UDP committ
2015-05-29 10:45:41 -06:00
e672bcebfd
UDP Networking: Add support for device event notification for UDP transfers.
2015-05-29 10:21:06 -06:00
e28a8b1416
Raw sockets: Correct some compile issues; better modularized device-related logic
2015-05-29 08:47:21 -06:00
988fbf0dcc
Merge branch 'master' of ssh://git.code.sf.net/p/nuttx/git into multinic
...
Conflicts:
nuttx/ChangeLog
2015-05-29 08:15:17 -06:00
5337176cdf
Networking: setsockopt() fails when setting timeouts to values less that an 100 msec. That is because the timeout is limited to stops of 1 decisecond and because the conversion of structure timeval was truncating the microsecond remainder. The utility net_timeval2dsec now accespts and option to determin how it handles the remainder: truncate, discarding the remainder, use the remainder to round to the closed decisecond value, or use any non-zero remainder to the next larger whole decisecond value.
...
For the setsockopt() case, it will always use the final option. This means that a time of zero (i.e., not timeout) can only occur if the value zero was explicated provided to setsockopt().
2015-05-29 07:17:15 -06:00
b5c005d5a4
Merge remote-tracking branch 'origin/master' into multinic
...
Conflicts:
nuttx/ChangeLog
2015-05-28 19:30:48 -06:00
d319b7c6f0
Networking: PKT logic now uses the device event list
2015-05-28 12:40:05 -06:00
01d176af76
net_startmonitor.c always returned zero. In the case where a socket has already been closed, it correctly handled the disconnetion event but still returned OK. Returning OK causes the callers of net_startmonitor to assume that the connection was okay, undoing the good things that net_startmonitor did and causing the socket to be marked as connected. This behavior was noted by Pelle Windestam.
2015-05-28 08:23:51 -06:00
0e2b6929b4
Add function headers to prototypes in net/socket/socket.h
2015-05-28 07:26:03 -06:00
b94321cfb4
Extend device specific callbacks to ICMPv6 and ARP. Fix some IPv6 compilation errors that have crept in
2015-05-27 11:39:44 -06:00
00011d4766
Another newly missing semicolon after a debug assertion. Noted by Librae
2015-04-29 15:56:08 -06:00
621eae86b1
Networking: If IPV6 is not enabled, an warning occurs for an unused variable, which is currently used inside the IPV6 block, but declared outside. From ObitalFox.
2015-04-27 11:28:28 -06:00
3ba9dda227
socket: net_dupsd: Do not call sockfd_socket() twice. From Juha Niskanen
2015-03-12 08:11:08 -06:00
db741dd695
Move some useful internal logic from recvfrom.c and udp_callback.c and put them in ip.h where they can be used more generally
2015-02-17 07:37:44 -06:00
eb8f5e548f
Purely cosmetic changes resulting from last review IPv6 UDP change
2015-02-16 15:23:02 -06:00
3f5ff4b210
IPv4 mapping to IPv6 implementation. Just for UDP. From Macs Neklyudov
2015-02-16 14:33:58 -06:00
d6704a1cd7
Suffer the consequences of moving struct timeval to its correct location
2015-02-15 15:18:35 -06:00
005643de2c
Networking: Fix a compilation error recently introduced into the raw packet logic
2015-02-11 09:30:30 -06:00
b756df982d
net/: Lots of build problems introduced into multiple NIC support. Many places where conditional logic based on CONFIG_NETDEV_MULTINIC is confused with CONFIG_NET_MULTILINK. Lots of code changed with IPv6 that was never compiled with MULTINIC enabled. Still some problem with parameter passing.
2015-02-09 18:15:34 -06:00
a07a764d42
ICMPv6: Adds basic logic to support verification that we have the IPv6 address in the Neighbor Table. This feature is important because otherwise the first packet sent to a remote peer will fail (it will be replaced with a Neighbor Solicitation).
2015-02-02 13:44:31 -06:00
0fc8d2fcc5
Unix domain: Add options to build in stream or datagram support separately
2015-01-31 07:58:51 -06:00
6b8da59df6
Networking: Add fcntl support for Unix domain sockets and UDP sockets with read-ahead enabled
2015-01-30 14:41:09 -06:00
62b706fa68
If a Unix domain socket is non-blocking, then the underlying FIFO should also be opened non-blocking
2015-01-30 12:43:37 -06:00
f357ba6c80
Fix error just introduces into recvfrom. From Macs N.
2015-01-30 08:22:44 -06:00
5736cf10af
Networking: Separate TCP poll logic out of net/sockets/net_poll.c and move it into the new net/tcp/tcp_netpoll.c.
2015-01-30 07:25:01 -06:00
de91d34a19
Networking: Separate out UDP poll logic from socket/net_poll.c into a new udp/udp_netpoll.c; Create a skeleton local/local_netpoll.c for future poll support on Unix domain sockets.
2015-01-30 07:09:25 -06:00
6eda06888a
Eliminate a warning
2015-01-30 06:39:23 -06:00
ccc72edc0b
Networking: Add UDP read-ahead support and support for poll/select on UDP sockets. From Macs N.
2015-01-30 06:08:26 -06:00
7e7d228cd7
Update a comment
2015-01-30 05:40:28 -06:00
7f95e4fb2c
Networking: Fix a major TCP bug introduced with commit e71c09ce9777ff732cb60bd07fb43d85522f79d6. Some connection logic was reorder -- setting the socket got moved BEFORE the point where the check was made if the socket was already connected. The resulting behavior was odd: Telnet would connect, but then when you exit and reconnect, it would fail to connect. But then if try again, it would connect okay. So the symptom was connect-fail-connect-fail-...
2015-01-29 16:30:47 -06:00
8b9958b7ba
Fix two compilation errors that occur when Unix domain occurs an IPv6 are enabled
2015-01-29 12:31:29 -06:00
0deca5b039
Unix domain: Various fixes to get apps/examplex/udgram working
2015-01-29 11:05:04 -06:00
9abd8e2e64
Fix typo in conditional compilation
2015-01-29 10:08:16 -06:00
f6bec26e53
Elminate some warnings with TCP and UDP are disabled
2015-01-29 09:33:45 -06:00
1c8ddae655
Fix a typo in comments
2015-01-28 17:51:59 -06:00
72ac79e7a1
Minor fixes after initial tests with apps/examples/udgram
2015-01-28 15:27:54 -06:00
dfa642601a
Merge remote-tracking branch 'origin/master' into afunix
2015-01-28 14:58:49 -06:00
35a814abca
net/socket/accept.c: Ooops.. deleted one too many header files
2015-01-28 14:56:06 -06:00
Gregory Nutt