1. CONFIG_ARCH_COVERAGE has been replaced by CONFIG_SCHED_GCOV
2. Delete the SIM-specific GCOV_ALL configuration and change it to a universal configuration for all architectures
Signed-off-by: wangmingrong1 <wangmingrong1@xiaomi.com>
Some app with same code runs on different cores in AMP mode,
need the physical core on which the function is called.
Signed-off-by: hujun5 <hujun5@xiaomi.com>
Signed-off-by: fangxinyong <fangxinyong@xiaomi.com>
reason:
In the kernel, we are planning to remove all occurrences of up_cpu_pause as one of the steps to
simplify the implementation of critical sections. The goal is to enable spin_lock_irqsave to encapsulate critical sections,
thereby facilitating the replacement of critical sections(big lock) with smaller spin_lock_irqsave(small lock)
Signed-off-by: hujun5 <hujun5@xiaomi.com>
Revert "Parallelize depend file generation"
This reverts commit d5b6ec450f.
parallel depend ddc does not significantly speed up compilation,
intermediately generated .ddc files can cause problems if compilation is interrupted unexpectedly
Signed-off-by: xuxin19 <xuxin19@xiaomi.com>
reason:
1 On different architectures, we can utilize more optimized strategies
to implement up_current_regs/up_set_current_regs.
eg. use interrupt registersor percpu registers.
code size
before
text data bss dec hex filename
262848 49985 63893 376726 5bf96 nuttx
after
text data bss dec hex filename
262844 49985 63893 376722 5bf92 nuttx
size change -4
Configuring NuttX and compile:
$ ./tools/configure.sh -l qemu-armv8a:nsh_smp
$ make
Running with qemu
$ qemu-system-aarch64 -cpu cortex-a53 -smp 4 -nographic \
-machine virt,virtualization=on,gic-version=3 \
-net none -chardev stdio,id=con,mux=on -serial chardev:con \
-mon chardev=con,mode=readline -kernel ./nuttx
Signed-off-by: hujun5 <hujun5@xiaomi.com>
tc3xx/tc3xx_timerisr.c: In function ‘up_timer_initialize’:
tc3xx/tc3xx_timerisr.c:58:39: warning: passing argument 1 of ‘tricore_systimer_initialize’ discards ‘volatile’ qualifier from pointer target type [-Wdiscarded-qualifiers]
58 | lower = tricore_systimer_initialize(&MODULE_STM0, 192, SCU_FREQUENCY);
In file included from tc3xx/tc3xx_timerisr.c:31:
nuttx/arch/tricore/src/common/tricore_internal.h:252:35: note: expected ‘void *’ but argument is of type ‘volatile Ifx_STM *’ {aka ‘volatile struct _Ifx_STM *’}
252 | tricore_systimer_initialize(void *tbase, int irq, uint64_t freq);
| ~~~~~~^~~~~
tc3xx/tc3xx_serial.c:177:16: warning: initialization discards ‘volatile’ qualifier from pointer target type [-Wdiscarded-qualifiers]
177 | .uartbase = &MODULE_ASCLIN0,
| ^
tc3xx/tc3xx_serial.c:178:16: warning: initialization discards ‘const’ qualifier from pointer target type [-Wdiscarded-qualifiers]
178 | .pins = &g_uart0_pins,
| ^
common/tricore_trapcall.c: In function ‘tricore_trapcall’:
common/tricore_trapcall.c:66:3: warning: passing argument 4 of ‘_assert’ discards ‘volatile’ qualifier from pointer target type [-Wdiscarded-qualifiers]
66 | PANIC_WITH_REGS("Trap", CURRENT_REGS);
| ^~~~~~~~~~~~~~~
In file included from common/tricore_trapcall.c:29:
nuttx/include/assert.h:189:45: note: expected ‘void *’ but argument is of type ‘volatile uintptr_t *’ {aka ‘volatile long unsigned int *’}
189 | FAR const char *msg, FAR void *regs);
Signed-off-by: chao an <anchao@lixiang.com>
Add support for tricore TC397
1. Porting based on AURIX TC397 KIT_A2G_TC397_5V_TFT evaluation board
https://www.infineon.com/cms/en/product/evaluation-boards/kit_a2g_tc397_5v_tft/
2. In order to avoid license and coding style issues, The chip-level code
still uses the implementation of AURIX Development Studio SDK.
The SDK package will be downloaded as a third-party package during compilation:
https://github.com/anchao/tc397_sdk
3. Single core only, SMP implementation will be provided in the future.
4. Implemented the basic System Timer, ASCLIN UART driver.
5. Only the Tasking tool chain is supported (ctc/ltc, license maybe required)
6. 'ostest' can be completed on the TC397 development board.
How to run?
1. Setup the tasking toolchain and license
$ export TSK_LICENSE_KEY_SW160800=d22f-7473-ff5d-1b70
$ export TSK_LICENSE_SERVER=192.168.36.12:9090
2. Build nuttx ELF
$ ./tools/configure.sh tc397/nsh
$ make -j
...
artc I800: creating archive libc_fpu.a
LD: nuttx
3. Switch to windows PC, setup AURIX-studio to Debugger Launcher
4. Replace runing ELF to nuttx, and re-download ELF
Signed-off-by: chao an <anchao@lixiang.com>
wangmingrong1