Alin Jerpelea
67d02a45eb
net: migrate to SPDX identifier
...
Most tools used for compliance and SBOM generation use SPDX identifiers
This change brings us a step closer to an easy SBOM generation.
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
2024-09-12 01:08:11 +08:00
daichuan
fe01d7c462
modify for offload checksum and add macro with tcp/icmp/icmpv6/igmp checksum
...
Signed-off-by: daichuan <daichuan@xiaomi.com>
2024-08-24 20:41:40 +08:00
liqinhui
05b101134a
net:Support jumbo frame prealloc the iob for the ICMP/UDP/TCP.
...
For the ICMP, UDP and TCP, pre-alloc an iob for a jumbo frame.
Signed-off-by: liqinhui <liqinhui@xiaomi.com>
2024-06-02 09:31:37 -03:00
Zhe Weng
2b9633e652
net: Support multiple IPv6 address per netdev
...
Note that user-space related code, like procfs and lifreq related ioctl commands, are not touched in this commit.
Signed-off-by: Zhe Weng <wengzhe@xiaomi.com>
2023-11-07 19:30:36 +08:00
liqinhui
3f08f32486
net: allow icmpv6 and udp to find the dev by the ifindex with s_boundto.
...
In order to support the dhcpv6c.
Signed-off-by: liqinhui <liqinhui@xiaomi.com>
2023-10-11 23:34:01 +08:00
chao an
7d1763a57c
net/assert: remove all unnecessary check for psock/conn
...
Since inet/socket layer already contains sanity checks, so remove unnecessary lower half checks
Signed-off-by: chao an <anchao@xiaomi.com>
2023-08-30 20:36:49 +08:00
Zhe Weng
d98bfc3e49
net/icmpv6: Fix `icmpv6_neighbor` for link-local address
...
The netdev of link-local address cannot be auto decided, and the link-local address should always be reguarded as address on local network.
The problem we met:
When using `icmpv6_autoconfig` with multiple netdev, the `icmpv6_neighbor` may take out wrong netdev with ip address already set, then it may send solicitation with wrong address (`dev->d_ipv6draddr`) on wrong device, and regard the link-local address as conflict (because `dev->d_ipv6draddr` exists on this network).
Signed-off-by: Zhe Weng <wengzhe@xiaomi.com>
2023-08-11 02:00:39 +08:00
zhanghongyu
35dee8fdd2
icmpv6: add SOCK_RAW type support
...
The third-party library we are porting will send and receive ICMPV6 messages
(router_advert / router_solicit / neighbor_advert / neighbor_solicit etc.)
from the user mode itself, so we added the SOCK_RAW related implementation
for ICMPV6.
Signed-off-by: zhanghongyu <zhanghongyu@xiaomi.com>
2023-05-07 22:43:10 +08:00
梁超众
5012195bde
support ipv4 ToS and ipv6 TrafficClass
...
Signed-off-by: 梁超众 <liangchaozhong@xiaomi.com>
2023-01-29 13:43:44 +08:00
luojun1234
ff3733b5b5
Support fragmentation and reassembly
...
Signed-off-by: luojun1 <luojun1@xiaomi.com>
2023-01-17 14:01:37 +08:00
Xiang Xiao
a851ad84c3
net: consistent the net sem wait naming conversion
...
to prepare the new mutex wait function
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
2023-01-15 12:31:30 -03:00
chao an
0cbbbb9215
net/devif: reuse devif_send() for can/pkt/icmp stack
...
Signed-off-by: chao an <anchao@xiaomi.com>
2023-01-13 16:41:10 +08:00
Zhe Weng
6222ad5764
Revert "net: downgrade iob priority of input/udp/icmp to avoid blocking devif"
...
This reverts commit d87620abc9
.
2023-01-12 01:56:18 +08:00
Zhe Weng
d87620abc9
net: downgrade iob priority of input/udp/icmp to avoid blocking devif
...
When trying to use iperf2, we found it comsumes all the IOB when sending UDP packets, then devif_poll has no IOB to send the packet out, so speed drops to 0 and never recovers.
Signed-off-by: Zhe Weng <wengzhe@xiaomi.com>
2023-01-05 22:25:19 +08:00
chao an
34d2cde8a8
net/l2/l3/l4: add support of iob offload
...
1. Add new config CONFIG_NET_LL_GUARDSIZE to isolation of l2 stack,
which will benefit l3(IP) layer for multi-MAC(l2) implementation,
especially in some NICs such as celluler net driver.
new configuration options: CONFIG_NET_LL_GUARDSIZE
CONFIG_NET_LL_GUARDSIZE will reserved l2 buffer header size of
network buffer to isolate the L2/L3 (MAC/IP) data on network layer,
which will be beneficial to L3 network layer protocol transparent
transmission and forwarding
------------------------------------------------------------
Layout of frist iob entry:
iob_data (aligned by CONFIG_IOB_ALIGNMENT)
|
| io_offset(CONFIG_NET_LL_GUARDSIZE)
| |
-------------------------------------------------
iob | Reserved | io_len |
-------------------------------------------------
-------------------------------------------------------------
Layout of different NICs implementation:
iob_data (aligned by CONFIG_IOB_ALIGNMENT)
|
| io_offset(CONFIG_NET_LL_GUARDSIZE)
| |
-------------------------------------------------
Ethernet | Reserved | ETH_HDRLEN | io_len |
---------------------------------|---------------
8021Q | Reserved | ETH_8021Q_HDRLEN | io_len |
---------------------------------|---------------
ipforward | Reserved | io_len |
-------------------------------------------------
--------------------------------------------------------------------
2. Support iob offload to l2 driver to avoid unnecessary memory copy
Support send/receive iob vectors directly between the NICs and l3/l4
stack to avoid unnecessary memory copies, especially on hardware that
supports Scatter/gather, which can greatly improve performance.
new interface to support iob offload:
------------------------------------------
| IOB version | original |
|----------------------------------------|
| devif_iob_poll() | devif_poll() |
| ... | ... |
------------------------------------------
--------------------------------------------------------------------
1> NIC hardware support Scatter/gather transfer
TX:
tcp_poll()/udp_poll()/pkt_poll()/...(l3|l4)
/ \
/ \
devif_poll_[l3|l4]_connections() devif_iob_send() (nocopy:udp/icmp/...)
/ \ (copy:tcp)
/ \
devif_iob_poll("NIC"_txpoll) callback() // "NIC"_txpoll
|
dev->d_iob: |
--------------- ---------------
io_data iob1 | | | iob3 | | |
\ --------------- ---------------
--------------- | --------------- |
iob0 | | | | iob2 | | | |
--------------- | --------------- |
\ | / /
\ | / /
----------------------------------------------
NICs io vector | | | | | | | | | |
----------------------------------------------
RX:
[tcp|udp|icmp|...]ipv[4|6]_data_handler()(iob_concat/append to readahead)
|
|
[tcp|udp|icmp|...]_ipv[4|6]_in()/...
|
|
pkt/ipv[4/6]_input()/...
|
|
NICs io vector receive(iov_base to each iobs)
--------------------------------------------------------------------
2> CONFIG_IOB_BUFSIZE is greater than MTU:
TX:
"(CONFIG_IOB_BUFSIZE) > (MAX_NETDEV_PKTSIZE + CONFIG_NET_GUARDSIZE + CONFIG_NET_LL_GUARDSIZE)"
tcp_poll()/udp_poll()/pkt_poll()/...(l3|l4)
/ \
/ \
devif_poll_[l3|l4]_connections() devif_iob_send() (nocopy:udp/icmp/...)
/ \ (copy:tcp)
/ \
devif_iob_poll("NIC"_txpoll) callback() // "NIC"_txpoll
|
"NIC"_send()
(dev->d_iob->io_data[CONFIG_NET_LL_GUARDSIZE - NET_LL_HDRLEN(dev)])
RX:
[tcp|udp|icmp|...]ipv[4|6]_data_handler()(iob_concat/append to readahead)
|
|
[tcp|udp|icmp|...]_ipv[4|6]_in()/...
|
|
pkt/ipv[4/6]_input()/...
|
|
NICs io vector receive(iov_base to io_data)
--------------------------------------------------------------------
3> Compatible with all old flat buffer NICs
TX:
tcp_poll()/udp_poll()/pkt_poll()/...(l3|l4)
/ \
/ \
devif_poll_[l3|l4]_connections() devif_iob_send() (nocopy:udp/icmp/...)
/ \ (copy:tcp)
/ \
devif_iob_poll(devif_poll_callback()) devif_poll_callback() /* new interface, gather iobs to flat buffer */
/ \
/ \
devif_poll("NIC"_txpoll) "NIC"_send()(dev->d_buf)
RX:
[tcp|udp|icmp|...]ipv[4|6]_data_handler()(iob_concat/append to readahead)
|
|
[tcp|udp|icmp|...]_ipv[4|6]_in()/...
|
|
netdev_input() /* new interface, Scatter/gather flat/iob buffer */
|
|
pkt/ipv[4|6]_input()/...
|
|
NICs io vector receive(Orignal flat buffer)
3. Iperf passthrough on NuttX simulator:
-------------------------------------------------
| Protocol | Server | Client | |
|-----------------------------------------------|
| TCP | 813 | 834 | Mbits/sec |
| TCP(Offload) | 1720 | 1100 | Mbits/sec |
| UDP | 22 | 757 | Mbits/sec |
| UDP(Offload) | 25 | 1250 | Mbits/sec |
-------------------------------------------------
Signed-off-by: chao an <anchao@xiaomi.com>
2022-12-03 11:47:04 +08:00
liyi
391b501639
net: extract l3 header build code into new functions
...
Signed-off-by: liyi <liyi25@xiaomi.com>
2022-11-29 18:36:15 +08:00
chao an
873023f89b
net/icmp[v6]: destroy nxsem properly
...
Signed-off-by: chao an <anchao@xiaomi.com>
2022-11-21 01:15:48 +08:00
chao an
a8d3286258
net: move device buffer define to common header
...
Signed-off-by: chao an <anchao@xiaomi.com>
2022-10-28 00:32:16 -04:00
anjiahao
5724c6b2e4
sem:remove sem default protocl
...
Signed-off-by: anjiahao <anjiahao@xiaomi.com>
2022-10-22 14:50:48 +08:00
chao.an
162fcd10ca
net: cleanup pvconn reference to avoid confuse
...
More reference:
https://github.com/apache/incubator-nuttx/pull/5252
https://github.com/apache/incubator-nuttx/pull/5434
Signed-off-by: chao.an <anchao@xiaomi.com>
2022-08-26 20:58:11 +08:00
Xiang Xiao
ba9486de4a
iob: Remove iob_user_e enum and related code
...
since it is impossible to track producer and consumer
correctly if TCP/IP stack pass IOB directly to netdev
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
2022-08-15 08:41:20 +03:00
Xiang Xiao
abc72ad128
net: Ensure sendmsg and sendfile return -EAGAIN in case of timeout
...
instead of -ETIMEOUT, as specify here:
https://pubs.opengroup.org/onlinepubs/009604599/functions/sendmsg.html
https://man7.org/linux/man-pages/man2/sendfile.2.html
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
2022-06-28 06:19:13 +03:00
chao.an
3fce144aeb
net/inet: move recv/send timeout into socket_conn_s
...
Signed-off-by: chao.an <anchao@xiaomi.com>
2022-02-10 15:04:33 -03:00
Petro Karashchenko
08043fb5bc
net: unify FAR keyword usage for all net buffer memory mapped buffers
...
Signed-off-by: Petro Karashchenko <petro.karashchenko@gmail.com>
2022-01-20 01:42:56 +08:00
Peter Bee
e223f60c09
net/socket: move si_send/recv into sendmsg/recvmsg
...
Implement si_send/sendto/recvfrom with si_sendmsg/recvmsg, instead of
the other way round.
Change-Id: I7b858556996e0862df22807a6edf6d7cfe6518fc
Signed-off-by: Peter Bee <bijunda1@xiaomi.com>
2021-03-05 04:46:13 -08:00