2da3da7fd6
Costmetic changes from review of last commit
2016-09-25 17:24:39 -06:00
9742757f26
Remove GPIO_ETH_RMII_TX_CLK. TX_CLK is not present in RMII
2016-09-22 10:05:45 +02:00
d2e03daeb1
Fix some strange spacing apparently introduced by tools/indent.sh
2016-09-21 16:06:05 -06:00
54eee5b303
Review of PR 135
2016-09-21 09:36:39 -06:00
cf99e50b7a
Add QEI lower-half driver impl. for Tiva series chip
2016-09-21 17:08:31 +08:00
1c20376e39
SAM GPIO: Apply Wolfgang's change for SAM3/4 to SAMA5 and SAMV7
2016-09-20 15:33:31 -06:00
3f22b63321
SAM3/4: Fix GPIO pull-up/down code.
...
Enabling the pull-down resistor while the pull-up resistor is still enabled
is not possible. In this case, the write of PIO_PPDER for the relevant I/O
line is discarded. Likewise, enabling the pull-up resistor while the
pull-down resistor is still enabled is not possible. In this case, the
write of PIO_PUER for the relevant I/O line is discarded.
2016-09-20 13:32:04 -07:00
ed22c93d7a
Tiva Ethernet: Needs support for CONFIG_NET_MULTIBUFFER=y
2016-09-20 13:02:24 -06:00
4dc3521743
All SAM Ethernet Drivers: Add support so that the drivers can be built with CONFIG_NET_MULTIBUFFER=y
2016-09-20 08:56:36 -06:00
7f1a88e243
Pierre's assertion-avoidance change should also be applied to STM32 F7 and L4
2016-09-15 08:41:49 -06:00
829de7d5bd
Set USB address to avoid a failed assertion
2016-09-15 08:36:45 -06:00
5d73f114b5
STM32L4: Add support for USART3-USART5
...
For STM32L4 parts, the higher number USART ports supported
varies. Add the HAVE_USARTx definitions to the configuration
to allow enabling the higher numbered USART ports.
Signed-off-by: Jim Wylder <jwylder@motorola.com>
2016-09-14 15:20:18 -05:00
50dd745e23
restore stm32l4 name
2016-09-07 14:17:38 +02:00
87d2f86968
Register renames to allow stm32l4 usb device compilation
2016-09-05 08:50:09 +02:00
944902a24d
F7 Usb Fix for FIFO loosing first word
2016-09-02 07:14:16 -10:00
81ba54b650
Using uinfo
2016-09-02 03:50:26 -10:00
e4a713477a
Apply stm32 fix to stm32l4
2016-08-31 13:12:49 +02:00
bef7f5be23
STM32 F7: Remove duplicate call to pkt_input from Ethernet driver.
2016-08-30 08:04:18 -06:00
9c3bade7b4
net/tcp: tcp_ipvX_bind() not actually using the ported selected with port==0. Also removes duplicate call to pkt_input(). Issues noted by Pascal Speck.
2016-08-30 07:59:57 -06:00
f2809d52d3
stm32_otgfsdev.c edited online with Bitbucket
...
dup SOF removed as noted by Sébastien Lorquet
2016-08-26 17:20:38 +00:00
87f4a8033a
BugFix:Lost first word from FIFO
...
1) Do not overwrite Reserved Bits in GINTSTS (per ref manual)*
2) Acknowledge all pending int on entry to ISR that are Only rc_w1*
3) Do not disable RXFVL*
4) Loop until RXFVL is cleared*
5) Only clear the NAK on the endpoint on the OTGFS_GRXSTSD_PKTSTS_SETUPDONE to
not loose the first WORD of FIFO all the data (Bug Fix)
Changed marked *are just driver clean up and ensure ints are not lost.
The bug fix is #5
Test case open putty and observer the Set/Get LineCoding
Without this fix #5 the Get will not match the Set, and
infact the data might be skewed by 4 bytes, that are lost
from the FIFO if the OTGFS_DOEPCTL0_CNAK bit is set in the
OTGFS_GRXSTSD_PKTSTS_SETUPRECVD as opposed to the OTGFS_GRXSTSD_PKTSTS_SETUPDONE
Set Line Coding DATA1: 4B | 00 c2 01 00 00 00 08 | c8 1B
Get Line Coding DATA1: 4B | .. .. .. .. 00 00 08 c8 .. 00 00 07 | 7a 72
2016-08-25 06:51:52 -10:00
4ebace37a9
Fix typos in LPC43 serial driver. Found by Vytautas Lukenskas
2016-08-24 10:34:56 -06:00
6bc952a2cc
STM32: Add IAR-style STM32F1xx vectors. Tested on STM32F103RB and STM32F107RC.
2016-08-24 10:10:33 -06:00
300361539a
sched/sched_cpuload_oneshot: Use the oneshot timer with optional entropy to measuer cPU load if so configured.
2016-08-20 12:47:07 -06:00
ae37c9859f
Cosmetic changes from review of PR 120
2016-08-19 06:32:28 -06:00
0f175039ad
Fix compilation warnings for stm32 eth with certain configs
2016-08-19 09:18:18 +02:00
c0074fd6b8
Merged in mlyszczek/nuttx/stm32butterfly2_board (pull request #118 )
...
add stm32butterfly2 development board
2016-08-18 11:14:10 -06:00
a3e1bdde14
STM32 SPI: Fix STM32F3XXX SPI driver to read 8-bit correctly.
2016-08-18 08:38:49 -06:00
3c58e8e9b4
SAMA5: Add oneshot max_delay method
2016-08-18 08:11:40 -06:00
d369eeec95
Remove a misleading comment
2016-08-18 07:13:04 -06:00
01ae660c6c
Merged in K-man23/nuttx/stm32_adc_fix (pull request #117 )
...
Change stm32 adc dma callback to send channel number instead of index
2016-08-17 14:05:37 -06:00
9b3bbc0f09
Change stm32 adc dma callback to send channel number instead of index
2016-08-17 13:02:36 -07:00
319ad528cd
Revert "sam_tc_clockselect() reworked to calculate frequency error using smallest possible divisor minimizing the frequency error rather than largest possible divisor which maximized the error."
...
This reverts commit 5d5851a5cd
2016-08-17 12:34:54 -06:00
a05d9c18da
Add connectivity line stm32 to be able to compile SYSCFG, add definitions for
...
usb clock divs
2016-08-17 20:11:15 +02:00
42ee88fe89
STM32F411 and STM32F446 map i2c2_sda_4 to different alternate function numbers
2016-08-17 11:01:44 -07:00
5d5851a5cd
sam_tc_clockselect() reworked to calculate frequency error using smallest possible divisor minimizing the frequency error rather than largest possible divisor which maximized the error.
2016-08-17 09:51:54 -06:00
17e5da96ea
SAMV7: DAC1 not available GMAC is enabled
2016-08-17 07:14:59 -06:00
e57891b41f
Kinetis I2C: Review and extend I2C register definitions for K40 and K60
2016-08-16 12:17:23 -06:00
a337494221
Kinetis I2C: Remove literal hex register values. Replace with symbolic definitions from kinetis_i2c.h
2016-08-16 11:44:04 -06:00
7f4488dc80
Review I2C register definitions and add support for the K64
2016-08-16 10:18:52 -06:00
a3b061e54f
Kinetis: Add support for I2C2
2016-08-16 10:02:28 -06:00
be83e73957
Kinetis I2C: Add comments, DEBUGASSERTions, and some I2C debug output.
2016-08-16 08:42:30 -06:00
32c1189f51
Re-order some fields so that the structure packs better and so is smaller.
2016-08-16 08:20:55 -06:00
f40bb14495
Kinetis: Add support for I2C1
2016-08-16 07:21:03 -06:00
b2be0be3a6
Simulated oneshot max_delay() method should not return a failure.
2016-08-15 11:43:55 -06:00
3f48392974
Add defaults in SAMV7 configuration for all DAC settings
2016-08-15 10:22:12 -06:00
e53118ffc2
SAMV7 DAC configuration needs some conditional logic
2016-08-15 08:55:11 -06:00
c367e4985f
Add configuration logic for the SAMV7 DAC module
2016-08-15 08:21:46 -06:00
053aea552f
Add support for SAMV7 DACC module
2016-08-15 08:00:36 -06:00
f84780f36e
Changes from review of PR 114
2016-08-14 13:38:47 -06:00
Gregory Nutt