Summary:
- Remove unnecessary d-cache operation to make boot fast
Impact:
- armv7-a SMP only
Testing:
- Tested with sabre-6quad:smp (QEMU and dev board)
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
Summary:
- This commit adds L2CC to smp/defconfig
- Also adds CLOCK_MONOTONIC
Impact:
- sabre-6quad:smp only
Testing:
- Tested with both QEMU and dev board
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
Summary:
- This commit adds L2CC to nsh/defconfig
- Also adds EXAMPLES_HELLO, TESTING_GETPRIME and TESTING_OSTEST
Impact:
- sabre-6quad:nsh only
Testing:
- Tested with both QEMU and dev board
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
MAX11612: 4 channels VCC=5V0 Int VRef=4.096V
MAX11613: 4 channels VCC=3V3 Int VRef=2.048V
MAX11614: 8 channels VCC=5V0 Int VRef=4.096V
MAX11615: 8 channels VCC=3V3 Int VRef=2.048V
MAX11616: 12 channels VCC=5V0 Int VRef=4.096V
MAX11617: 12 channels VCC=3V3 Int VRef=2.048V
Note: The chips' auto-scanning feature is not supported in this revision.
Summary:
- This commit fixes armv7-a deadlocks with D-cache in SMP mode.
- In SMP mode, MMU for SDRAM area must be set to shareable
Impact:
- SMP only
Testing:
- Tested with sabre-6quad:smp (QEMU and dev board)
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
Summary:
- I noticed waitpid_test stops with lc823450-xgevk:rndis
- The condition was CONFIG_DEBUG_ASSERTION=y
- Actually, the child task sent SIGCHILD but the parent couldn't catch the signal
- Then, I found that nx_waitid(), nx_waitpid() use sched_lock()
- However, a parent task and a child task are running on different CPUs
- So, sched_lock() is not enough and need to use a critical section
- Also, signal handling in nxtask_exithook() must be done in a critical section
Impact:
- SMP only
Testing:
- Tested with ostest with the following configurations
- lc823450-xgevk:rndis (CONFIG_DEBUG_ASSERTION=y and n)
- spresense:smp
- spresense:wifi_smp (NCPUS=2 and 4)
- sabre-6quad:smp (QEMU)
- esp32-core:smp (QEMU)
- maix-bit:smp (QEMU)
- sim:smp
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
arch/arm/src/stm32/hardware/stm32_dmamux.h,
arch/arm/src/stm32/hardware/stm32g47xxx_dmamux.h:
* New files, based on STM32G474RE reference manual, RM0440 Rev 4.
Used reference manual for STM32G071CB. The F0 and L0 families do not
appear to have a DMAMUX.
arch/arm/src/stm32f0l0g0/hardware/stm32_dmamux.h:
* Remove all mentions of DMAMUX12 from comments. This family has
at most DMAMUX1 only.
* Add missing defines DMAMUX_CCR_SPOL_NONE,
DMAMUX_CCR_SPOL_RISING, DMAMUX_CCR_SPOL_FALLING, and
DMAMUX_CCR_SPOL_BOTH.
* DMAMUX_CCR_SYNCID_SHIFT: Fix comment. Was "Bits 24-26" (3 bits)
but datasheet shows bits 24-28 (5 bits).
* DMAMUX_CCR_SYNCID_MASK: Fix mask. Was 0x7 (3 bits) but datasheet
shows (5 bits) 0x1f.
* DMAMUX1_CSR_SOF(x): Add parenthesis around macro parameter
expansion.
* DMAMUX1_CFR_SOF(x): Rename to DMAMUX1_CFR_CSOF(x) for
consistency with datasheet and add parenthesis around macro
parameter expansion.
* DMAMUX_RGCR_GPOL_MASK: Fix incorrect mask. Was 0x7 (3 bits) but
datasheet shows only 2 bits (0x3).
* Add missing defines DMAMUX_RGCR_GPOL_NONE,
DMAMUX_RGCR_GPOL_RISING, DMAMUX_RGCR_GPOL_FALLING, and
DMAMUX_RGCR_GPOL_BOTH.
* DMAMUX_RGCR_GNBREQ_SHIFT: Fix incorrect value. Was 17 (collision
with DMAMUX_RGCR_GPOL_SHIFT) but datasheet and comment both show
this bitfield at bits 19-23.
* DMAMUX_RGCR_GNBREQL_MASK: Fix incorrect mask. Was 0x7 (3 bits)
but datasheet shows 5 bits (0x1f).
* DMAMUX1_RGSR_SOF(x): Rename to DMAMUX1_RGSR_OF(x) for
consistency with datasheet and add parenthesis around macro
parameter expansion.
* DMAMUX1_RGCFR_SOF(x): Rename to DMAMUX1_RGCFR_COF(x) for
consistency with datasheet and add parenthesis around macro
parameter expansion.
* DMAMAP_MAP(d,c): Add parenthesis around macro parameter
expansion.
* Fix nxstyle errors.
The previous implementation of strtoul(l) is flawed. The range check
assumed that when overflow happens, the truncated value is smaller than
the original value. As a counter example, passing "10000000000" to
strtol will not trigger ERANGE, but return a truncated value. This patch
adds more accurate range checks.
Change-Id: I239e034e390b4974157ed6efa17110f2e74904cf
Signed-off-by: Peter Bee <bijunda1@xiaomi.com>
arch/arm/src/stm32/hardware/stm32_spi.h:
* Avoid numerous ifdef on STM32 part numbers and make the
different variations of SPI peripheral features more
self-documenting: based on STM32_HAVE_IP_SPI_V* defines
from chip.h, define some or all of HAVE_SPI_I2S,
HAVE_SPI_TI_MODE, HAVE_SPI_ARB_DATA_SIZE, HAVE_SPI_FIFOS,
HAVE_SPI_NSSP, HAVE_SPI_I2S_ASTRT, and make decisions on
which registers and bitfields to define based on them.
* Define registers and bitfields for STM32_HAVE_IP_SPI_V4,
currently used only for STM32G47XX family MCUs, including
SPI_CR1_CRCL, SPI_CR2_NSSP, SPI_CR2_FRXTH, SPI_CR2_LDMARX,
SPI_CR2_LDMATX, SPI_CR2_DS_SHIFT/SPI_CR2_DS_MASK,
SPI_SR_FRLVL_SHIFT/SPI_SR_FRLVL_MASK, and
SPI_I2SCFGR_ASTRTEN.
* SPI_I2SCFGR_I2SSTD_PHILLIPS: Was defined incorrectly as
(xx << SPI_I2SCFGR_I2SSTD_SHIFT). Corrected this to
(0 << SPI_I2SCFGR_I2SSTD_SHIFT).
* SPI_I2SCFGR_I2SSTD_MSB: Was defined incorrectly as
(0 << SPI_I2SCFGR_I2SSTD_SHIFT). Corrected this to
(1 << SPI_I2SCFGR_I2SSTD_SHIFT).
* Fix nxstyle errors.
arch/arm/include/stm32/chip.h:
* Add new section "Peripheral IP versions" and specify version of
SPI IP block for STM32F10XX, STM32F20XX, STM32F30XX, STM32F33XX,
STM32F37XX, STM32F4XXX, STM32G47XX, and STM32L15XX.
arch/arm/src/stm32h7/hardware/stm32_dmamux.h:
* DMAMUX1_CSR_SOF(x): Add parenthesis around macro parameter
expansion.
* DMAMUX1_CFR_SOF(x): Rename to DMAMUX1_CFR_CSOF(x) for
consistency with datasheet and add parenthesis around macro
parameter expansion.
* DMAMUX_RGCR_GPOL_MASK: Fix incorrect mask. Was 7 (3 bits) but
datasheet shows only 2 bits.
* Add missing defines DMAMUX_RGCR_GPOL_NONE,
DMAMUX_RGCR_GPOL_RISING, DMAMUX_RGCR_GPOL_FALLING, and
DMAMUX_RGCR_GPOL_BOTH.
* DMAMUX_RGCR_GNBREQ_SHIFT: Fix incorrect value. Was 17 (collision
with DMAMUX_RGCR_GPOL_SHIFT) but datasheet and comment both show
this bitfield at bits 19-23.
* DMAMUX_RGCR_GNBREQL_MASK: Fix incorrect mask. Was 7 (3 bits) but
datasheet shows 5 bits.
* DMAMUX1_RGSR_SOF(x): Rename to DMAMUX1_RGSR_OF(x) for
consistency with datasheet and add parenthesis around macro
parameter expansion.
* DMAMUX1_RGCFR_SOF(x): Rename to DMAMUX1_RGCFR_COF(x) for
consistency with datasheet and add parenthesis around macro
parameter expansion.
* DMAMAP_MAP(d,c): Add parenthesis around macro parameter
expansion.
The unique minor limit of 255 will overflow easily in
some scenarios where eventfd needs to be create/destroy
frequently:
while (1)
{
fd = eventfd(0, 0); // minor++
sleep(1);
close(fd);
}
remove the unique minor limit.
Change-Id: I0ea1c825ce9b542c883166cb3e72574455ffdd0d
Signed-off-by: chao.an <anchao@xiaomi.com>
1.use userspace buffer rather than intermediate buffer of upperhalf driver
2.support block and non-block ways.
Change-Id: I1d0cecfaa20ce54961c58713d8f2f8857e349791
Signed-off-by: dongjiuzhu <dongjiuzhu1@xiaomi.com>
1.support for multi-user access
2.support special cmd to control sensor
3.support userspace to set size of intermediate buffer
by ioctl: SNOIC_SET_BUFFER_SIZE
Change-Id: I9ce3a65b88b12c28388ec397431f1a277b120c2a
Signed-off-by: dongjiuzhu <dongjiuzhu1@xiaomi.com>
YAMAMOTO Takashi