incubator-nuttx

Commit Graph

Author	SHA1	Message	Date
Xiang Xiao	bd4e8e19d3	Run codespell -w against all files and fix the wrong correction	2020-02-22 14:45:07 -06:00
Xiang Xiao	80277d1630	Refine the preprocessor conditional guard style (#190 )	2020-01-31 19:07:39 +01:00
Xiang Xiao	68951e8d72	Remove exra whitespace from files (#189 ) * Remove multiple newlines at the end of files * Remove the whitespace from the end of lines	2020-01-31 09:24:49 -06:00
Xiang Xiao	6a3c2aded6	Fix wait loop and void cast (#24 ) * Simplify EINTR/ECANCEL error handling 1. Add semaphore uninterruptible wait function 2 .Replace semaphore wait loop with a single uninterruptible wait 3. Replace all sem_xxx to nxsem_xxx * Unify the void cast usage 1. Remove void cast for function because many place ignore the returned value witout cast 2. Replace void cast for variable with UNUSED macro	2020-01-02 10:54:43 -06:00
Gregory Nutt	66a55c91e7	Linker scripts: Fix some alignment problems.	2019-09-15 18:06:36 -06:00
Gregory Nutt	2925c28f8f	All linker scripts: Preface all _edata defininitions with . = ALIGN(4). Otherwise, the last bytes in the .data section may not be initialized properly. Also convert all linker scripts indent in units of 8-spaces to units of 4-spaces.	2019-09-15 17:22:16 -06:00
Gregory Nutt	0bd60c3722	All linker scripts: Preface all _ebss defininitions with . = ALIGN(4). Otherwise, the last bytes in the .bss section will not be initialized properly. Also convert all linker scripts that use TABs to spaces.	2019-09-15 15:27:58 -06:00
Gregory Nutt	fb50a65756	boards/: Move more drivers directories at were placed too high in the hieararchy.	2019-08-24 14:42:14 -06:00
Alin Jerpelea	c6355f58d6	Merged in alinjerpelea/nuttx (pull request #1014 ) boards: add stub drivers folder for later use * boards: add stub drivers folder for later use The board/drivers folder is added for future use. In this folder we should place drives that are platform specific and depend on HW that is present only on a specific platform. NOTE: All shared drivers should go to the regular driver folder Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * tools: shift BOARD_DIR one level up In preparation for drivers and common folders we are moving the BOARD_DIR path up one level. Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * tools: add drivers/platform symlink Link the boards/<arch>/<chip>/drivers dir to drivers/platform Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * drivers: add platform specifc drivers extension There are platforms that use specific drivers and we should be able to include those drivers in the build Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * board: cxd56xx: drivers: add AK09912 driver for SCU This is a platform specific driver connected on the SCU unit. Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> Approved-by: Gregory Nutt <gnutt@nuttx.org>	2019-08-21 13:39:29 +00:00
Alin Jerpelea	a06033df64	Merged in alinjerpelea/nuttx (pull request #971 ) codestyle fixes * misoc: codestyle fixes After the board restructuration is time for codestyle cleanup Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * or1k: codestyle fixes After the board restructuration is time for codestyle cleanup Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * renesas: codestyle fixes After the board restructuration is time for codestyle cleanup Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * risc-v: codestyle fixes After the board restructuration is time for codestyle cleanup Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * sim: codestyle fixes After the board restructuration is time for codestyle cleanup Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * x86: codestyle fixes After the board restructuration is time for codestyle cleanup Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * xtensa: codestyle fixes After the board restructuration is time for codestyle cleanup Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * z16: codestyle fixes After the board restructuration is time for codestyle cleanup Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * z80: codestyle fixes After the board restructuration is time for codestyle cleanup Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> Approved-by: Gregory Nutt <gnutt@nuttx.org>	2019-08-09 13:22:39 +00:00
Gregory Nutt	8ecb72ded6	Add defconfig files must include CONFIG_ARCH_CHIP= to break and chicken-and-egg problem.	2019-08-07 15:37:35 -06:00
Alin Jerpelea	1358e829ad	Merged in alinjerpelea/nuttx (pull request #967 ) group boards based on chip * a1x: group boards based on chip All boards based on the same chip are moved to the same folder following the arch layout <arch>/<chip>/<board>. Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * am335x: group boards based on chip All boards based on the same chip are moved to the same folder following the arch layout <arch>/<chip>/<board>. Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * c5471: group boards based on chip All boards based on the same chip are moved to the same folder following the arch layout <arch>/<chip>/<board>. Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * scx56xx: group boards based on chip All boards based on the same chip are moved to the same folder following the arch layout <arch>/<chip>/<board>. Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * dm320: group boards based on chip All boards based on the same chip are moved to the same folder following the arch layout <arch>/<chip>/<board>. Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * efm32: group boards based on chip All boards based on the same chip are moved to the same folder following the arch layout <arch>/<chip>/<board>. Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * imx6: group boards based on chip All boards based on the same chip are moved to the same folder following the arch layout <arch>/<chip>/<board>. Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * imxrt: group boards based on chip All boards based on the same chip are moved to the same folder following the arch layout <arch>/<chip>/<board>. Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * kinetis: group boards based on chip All boards based on the same chip are moved to the same folder following the arch layout <arch>/<chip>/<board>. Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * kl: group boards based on chip All boards based on the same chip are moved to the same folder following the arch layout <arch>/<chip>/<board>. Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * lc823450: group boards based on chip All boards based on the same chip are moved to the same folder following the arch layout <arch>/<chip>/<board>. Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * lpc17xx_40xx: group boards based on chip All boards based on the same chip are moved to the same folder following the arch layout <arch>/<chip>/<board>. Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * lpc214x: group boards based on chip All boards based on the same chip are moved to the same folder following the arch layout <arch>/<chip>/<board>. Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * lpc2378: group boards based on chip All boards based on the same chip are moved to the same folder following the arch layout <arch>/<chip>/<board>. Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * lpc31xx: group boards based on chip All boards based on the same chip are moved to the same folder following the arch layout <arch>/<chip>/<board>. Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * lpc43xx: group boards based on chip All boards based on the same chip are moved to the same folder following the arch layout <arch>/<chip>/<board>. Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * lpc54xx: group boards based on chip All boards based on the same chip are moved to the same folder following the arch layout <arch>/<chip>/<board>. Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * max326xx: group boards based on chip All boards based on the same chip are moved to the same folder following the arch layout <arch>/<chip>/<board>. Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * moxart: group boards based on chip All boards based on the same chip are moved to the same folder following the arch layout <arch>/<chip>/<board>. Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * nrf52: group boards based on chip All boards based on the same chip are moved to the same folder following the arch layout <arch>/<chip>/<board>. Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * nuc1xx: group boards based on chip All boards based on the same chip are moved to the same folder following the arch layout <arch>/<chip>/<board>. Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * sam34: group boards based on chip All boards based on the same chip are moved to the same folder following the arch layout <arch>/<chip>/<board>. Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * sama5: group boards based on chip All boards based on the same chip are moved to the same folder following the arch layout <arch>/<chip>/<board>. Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * samd2l2: group boards based on chip All boards based on the same chip are moved to the same folder following the arch layout <arch>/<chip>/<board>. Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * samd5e5: group boards based on chip All boards based on the same chip are moved to the same folder following the arch layout <arch>/<chip>/<board>. Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * samv7: group boards based on chip All boards based on the same chip are moved to the same folder following the arch layout <arch>/<chip>/<board>. Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * stm32f0l0g0: group boards based on chip All boards based on the same chip are moved to the same folder following the arch layout <arch>/<chip>/<board>. Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * stm32f7: group boards based on chip All boards based on the same chip are moved to the same folder following the arch layout <arch>/<chip>/<board>. Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * stm32h7: group boards based on chip All boards based on the same chip are moved to the same folder following the arch layout <arch>/<chip>/<board>. Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * stm32l4: group boards based on chip All boards based on the same chip are moved to the same folder following the arch layout <arch>/<chip>/<board>. Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * stm32: group boards based on chip All boards based on the same chip are moved to the same folder following the arch layout <arch>/<chip>/<board>. Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * str71x: group boards based on chip All boards based on the same chip are moved to the same folder following the arch layout <arch>/<chip>/<board>. Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * tiva: group boards based on chip All boards based on the same chip are moved to the same folder following the arch layout <arch>/<chip>/<board>. Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * tms570: group boards based on chip All boards based on the same chip are moved to the same folder following the arch layout <arch>/<chip>/<board>. Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * xmc4: group boards based on chip All boards based on the same chip are moved to the same folder following the arch layout <arch>/<chip>/<board>. Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * p112: typo fix this boars is a z80 board and was moved to the wrong arch Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * avr: at32uc3: group boards based on chip All boards based on the same chip are moved to the same folder following the arch layout <arch>/<chip>/<board>. Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * avr: at90usb: group boards based on chip All boards based on the same chip are moved to the same folder following the arch layout <arch>/<chip>/<board>. Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * avr: atmega: group boards based on chip All boards based on the same chip are moved to the same folder following the arch layout <arch>/<chip>/<board>. Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * hc: mcs92s12ne64: group boards based on chip All boards based on the same chip are moved to the same folder following the arch layout <arch>/<chip>/<board>. Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * mips: pic32mx: group boards based on chip All boards based on the same chip are moved to the same folder following the arch layout <arch>/<chip>/<board>. Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * mips: pic32mz: group boards based on chip All boards based on the same chip are moved to the same folder following the arch layout <arch>/<chip>/<board>. Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * misoc: lm32: group boards based on chip All boards based on the same chip are moved to the same folder following the arch layout <arch>/<chip>/<board>. Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * or1k: mor1kx: group boards based on chip All boards based on the same chip are moved to the same folder following the arch layout <arch>/<chip>/<board>. Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * renesas: m32262f8: group boards based on chip All boards based on the same chip are moved to the same folder following the arch layout <arch>/<chip>/<board>. Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * renesas: sh7032: group boards based on chip All boards based on the same chip are moved to the same folder following the arch layout <arch>/<chip>/<board>. Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * risk-v: gap8: group boards based on chip All boards based on the same chip are moved to the same folder following the arch layout <arch>/<chip>/<board>. Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * risk-v: nr5m100: group boards based on chip All boards based on the same chip are moved to the same folder following the arch layout <arch>/<chip>/<board>. Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * sim: sim: group boards based on chip All boards based on the same chip are moved to the same folder following the arch layout <arch>/<chip>/<board>. Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * x86: qemu: group boards based on chip All boards based on the same chip are moved to the same folder following the arch layout <arch>/<chip>/<board>. Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * xtensa: esp32: group boards based on chip All boards based on the same chip are moved to the same folder following the arch layout <arch>/<chip>/<board>. Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * z16: z16f2811: group boards based on chip All boards based on the same chip are moved to the same folder following the arch layout <arch>/<chip>/<board>. Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * z80: ez80: group boards based on chip All boards based on the same chip are moved to the same folder following the arch layout <arch>/<chip>/<board>. Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * z80: z180: group boards based on chip All boards based on the same chip are moved to the same folder following the arch layout <arch>/<chip>/<board>. Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * z80: z80: group boards based on chip All boards based on the same chip are moved to the same folder following the arch layout <arch>/<chip>/<board>. Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * z80: z8: group boards based on chip All boards based on the same chip are moved to the same folder following the arch layout <arch>/<chip>/<board>. Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * tools: update tools for boards based on chip This patch updates only the linux tools Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * pcduino-a10: defconfig update add ARCH_CHIP to defconfig Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * beaglebone-black: defconfig update add ARCH_CHIP to defconfig Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * c5471evm: defconfig update add ARCH_CHIP to defconfig Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * spresense: defconfig update add ARCH_CHIP to defconfig Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * ntosd-dm320: defconfig update add ARCH_CHIP to defconfig Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * efm32-g8xx-stk: defconfig update add ARCH_CHIP to defconfig Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * efm32gg-stk3700: defconfig update add ARCH_CHIP to defconfig Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * olimex-efm32g880f128-stk: defconfig update add ARCH_CHIP to defconfig Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * sabre-6quad: defconfig update add ARCH_CHIP to defconfig Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * imxrt1050-evk: defconfig update add ARCH_CHIP to defconfig Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * imxrt1060-evk: defconfig update add ARCH_CHIP to defconfig Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * freedom-k28f: defconfig update add ARCH_CHIP to defconfig Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * freedom-k64f: defconfig update add ARCH_CHIP to defconfig Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * freedom-k66f: defconfig update add ARCH_CHIP to defconfig Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * kwikstik-k40: defconfig update add ARCH_CHIP to defconfig Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * teensy-3.x: defconfig update add ARCH_CHIP to defconfig Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * twr-k60n512: defconfig update add ARCH_CHIP to defconfig Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * twr-k64f120m: defconfig update add ARCH_CHIP to defconfig Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * freedom-kl25z: defconfig update add ARCH_CHIP to defconfig Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * freedom-kl26z: defconfig update add ARCH_CHIP to defconfig Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * teensy-lc: defconfig update add ARCH_CHIP to defconfig Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * lc823450: defconfig update add ARCH_CHIP to defconfig Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * lincoln60: defconfig update add ARCH_CHIP to defconfig Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * lpc4088-devkit: defconfig update add ARCH_CHIP to defconfig Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * lpc4088-quickstart: defconfig update add ARCH_CHIP to defconfig Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * lpcxpresso-lpc1768: defconfig update add ARCH_CHIP to defconfig Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * mbed: defconfig update add ARCH_CHIP to defconfig Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * mcb1700: defconfig update add ARCH_CHIP to defconfig Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * olimex-lpc1766stk: defconfig update add ARCH_CHIP to defconfig Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * open1788: defconfig update add ARCH_CHIP to defconfig Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * pnev5180b: defconfig update add ARCH_CHIP to defconfig Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * u-blox-c027: defconfig update add ARCH_CHIP to defconfig Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * zkit-arm-1769: defconfig update add ARCH_CHIP to defconfig Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * mcu123-lpc214x: defconfig update add ARCH_CHIP to defconfig Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * zp214xpa: defconfig update add ARCH_CHIP to defconfig Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * olimex-lpc2378: defconfig update add ARCH_CHIP to defconfig Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * ea3131: defconfig update add ARCH_CHIP to defconfig Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * ea3152: defconfig update add ARCH_CHIP to defconfig Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * olimex-lpc-h3131: defconfig update add ARCH_CHIP to defconfig Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * bambino-200e: defconfig update add ARCH_CHIP to defconfig Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * lpc4330-xplorer: defconfig update add ARCH_CHIP to defconfig Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * lpc4337-ws: defconfig update add ARCH_CHIP to defconfig Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * lpc4337-evb: defconfig update add ARCH_CHIP to defconfig Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * lpc4370-link2: defconfig update add ARCH_CHIP to defconfig Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * lpcxpresso-lpc54628: defconfig update add ARCH_CHIP to defconfig Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * max32660-evsys: defconfig update add ARCH_CHIP to defconfig Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * moxa: defconfig update add ARCH_CHIP to defconfig Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * nrf52-generic: defconfig update add ARCH_CHIP to defconfig Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * nutiny-nuc120: defconfig update add ARCH_CHIP to defconfig Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * arduino-due: defconfig update add ARCH_CHIP to defconfig Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * flipnclick-sam3x: defconfig update add ARCH_CHIP to defconfig Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * sam3u-ek: defconfig update add ARCH_CHIP to defconfig Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * sam4cmp-db: defconfig update add ARCH_CHIP to defconfig Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * sam4e-ek: defconfig update add ARCH_CHIP to defconfig Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * sam4l-xplained: defconfig update add ARCH_CHIP to defconfig Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * sam4s-xplained: defconfig update add ARCH_CHIP to defconfig Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * sam4s-xplained-pro: defconfig update add ARCH_CHIP to defconfig Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * sama5d2-xult: defconfig update add ARCH_CHIP to defconfig Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * sama5d3-xplained: defconfig update add ARCH_CHIP to defconfig Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * sama5d3x-ek: defconfig update add ARCH_CHIP to defconfig Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * sama5d4-ek: defconfig update add ARCH_CHIP to defconfig Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * samd20-xplained: defconfig update add ARCH_CHIP to defconfig Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * samd21-xplained: defconfig update add ARCH_CHIP to defconfig Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * saml21-xplained: defconfig update add ARCH_CHIP to defconfig Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * metro-m4: defconfig update add ARCH_CHIP to defconfig Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * same70-xplained: defconfig update add ARCH_CHIP to defconfig Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * same71-xult: defconfig update add ARCH_CHIP to defconfig Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * axoloti: defconfig update add ARCH_CHIP to defconfig Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * clicker2-stm32: defconfig update add ARCH_CHIP to defconfig Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * cloudctrl: defconfig update add ARCH_CHIP to defconfig Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * fire-stm32v2: defconfig update add ARCH_CHIP to defconfig Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * hymini-stm32v: defconfig update add ARCH_CHIP to defconfig Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * maple: defconfig update add ARCH_CHIP to defconfig Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * mikroe-stm32f4: defconfig update add ARCH_CHIP to defconfig Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * nucleo-f103rb: defconfig update add ARCH_CHIP to defconfig Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * nucleo-f207zg: defconfig update add ARCH_CHIP to defconfig Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * nucleo-f302r8: defconfig update add ARCH_CHIP to defconfig Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * nucleo-f303re: defconfig update add ARCH_CHIP to defconfig Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * nucleo-f303ze: defconfig update add ARCH_CHIP to defconfig Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * nucleo-f334r8: defconfig update add ARCH_CHIP to defconfig Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * nucleo-f410rb: defconfig update add ARCH_CHIP to defconfig Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * nucleo-f446re: defconfig update add ARCH_CHIP to defconfig Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * nucleo-f4x1re: defconfig update add ARCH_CHIP to defconfig Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * nucleo-1152re: defconfig update add ARCH_CHIP to defconfig Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * olimex-stm32-e407: defconfig update add ARCH_CHIP to defconfig Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * olimex-stm32-h405: defconfig update add ARCH_CHIP to defconfig Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * olimex-stm32-h407: defconfig update add ARCH_CHIP to defconfig Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * olimex-stm32-p107: defconfig update add ARCH_CHIP to defconfig Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * olimex-stm32-p207: defconfig update add ARCH_CHIP to defconfig Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * olimex-stm32-p407: defconfig update add ARCH_CHIP to defconfig Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * olimex-stm32: defconfig update add ARCH_CHIP to defconfig Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * omnibusf4: defconfig update add ARCH_CHIP to defconfig Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * photon: defconfig update add ARCH_CHIP to defconfig Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * shenzou: defconfig update add ARCH_CHIP to defconfig Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * stm3210e-eval: defconfig update add ARCH_CHIP to defconfig Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * stm3220g-eval: defconfig update add ARCH_CHIP to defconfig Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * stm3240g-eval: defconfig update add ARCH_CHIP to defconfig Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * stm32_tiny: defconfig update add ARCH_CHIP to defconfig Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * stm32butterfly2: defconfig update add ARCH_CHIP to defconfig Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * stm32f103-minimum: defconfig update add ARCH_CHIP to defconfig Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * stm32f334-disco: defconfig update add ARCH_CHIP to defconfig Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * stm32f3discovery: defconfig update add ARCH_CHIP to defconfig Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * stm32f411e-disco: defconfig update add ARCH_CHIP to defconfig Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * stm32f429i-disco: defconfig update add ARCH_CHIP to defconfig Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * stm32f4discovery: defconfig update add ARCH_CHIP to defconfig Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * stm32ldiscovery: defconfig update add ARCH_CHIP to defconfig Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * stm32vldiscovery: defconfig update add ARCH_CHIP to defconfig Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * viewtool-stm32f107: defconfig update add ARCH_CHIP to defconfig Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * b-l072z-lrwan1: defconfig update add ARCH_CHIP to defconfig Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * nucleo-f072rb: defconfig update add ARCH_CHIP to defconfig Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * nucleo-f091rc: defconfig update add ARCH_CHIP to defconfig Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * nucleo-f071rg: defconfig update add ARCH_CHIP to defconfig Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * nucleo-l073rz: defconfig update add ARCH_CHIP to defconfig Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * stm32f051-discovery: defconfig update add ARCH_CHIP to defconfig Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * stm32f072-discovery: defconfig update add ARCH_CHIP to defconfig Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * nucleo-144: defconfig update add ARCH_CHIP to defconfig Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * stm32f746-ws: defconfig update add ARCH_CHIP to defconfig Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * stm32f746g-disco: defconfig update add ARCH_CHIP to defconfig Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * stm32f746g-disco: defconfig update add ARCH_CHIP to defconfig Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * nucleo-h743zi: defconfig update add ARCH_CHIP to defconfig Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * b-l475e-iot01a: defconfig update add ARCH_CHIP to defconfig Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * nucleo-l432kc: defconfig update add ARCH_CHIP to defconfig Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * nucleo-l432re: defconfig update add ARCH_CHIP to defconfig Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * nucleo-l476rg: defconfig update add ARCH_CHIP to defconfig Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * nucleo-l496zg: defconfig update add ARCH_CHIP to defconfig Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * stm32l476-mdk: defconfig update add ARCH_CHIP to defconfig Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * stm32l476vg-disco: defconfig update add ARCH_CHIP to defconfig Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * stm32l4r9ai-disco: defconfig update add ARCH_CHIP to defconfig Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * olimex-strp711: defconfig update add ARCH_CHIP to defconfig Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * dk-tm4c129x: defconfig update add ARCH_CHIP to defconfig Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * eagle100: defconfig update add ARCH_CHIP to defconfig Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * ekk-lm3s9b96: defconfig update add ARCH_CHIP to defconfig Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * launchxl-cc1310: defconfig update add ARCH_CHIP to defconfig Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * launchxl-cc1312r1: defconfig update add ARCH_CHIP to defconfig Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * lm3s6432-s2e: defconfig update add ARCH_CHIP to defconfig Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * lm3s6965-ek: defconfig update add ARCH_CHIP to defconfig Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * lm3s8962-ek: defconfig update add ARCH_CHIP to defconfig Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * lm4f120-launchpad: defconfig update add ARCH_CHIP to defconfig Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * lm4c123g-launchpad: defconfig update add ARCH_CHIP to defconfig Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * lm4c1294-launchpad: defconfig update add ARCH_CHIP to defconfig Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * launchxl-tms57004: defconfig update add ARCH_CHIP to defconfig Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * tms570ls31x-usb-kit: defconfig update add ARCH_CHIP to defconfig Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * xmc4500-relax: defconfig update add ARCH_CHIP to defconfig Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * zp214xpa: typo fix add missing tools/oocd.sh Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> Approved-by: Gregory Nutt <gnutt@nuttx.org>	2019-08-07 20:49:39 +00:00
Alin Jerpelea	af28821c77	Merged in alinjerpelea/nuttx (pull request #966 ) group boards by architecture * z80: group boards by architecture all boards that share the same architecture are moved to the same arch folder following the soc layout Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * z16: group boards by architecture all boards that share the same architecture are moved to the same arch folder following the soc layout Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * xtensa: group boards by architecture all boards that share the same architecture are moved to the same arch folder following the soc layout Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * x86: group boards by architecture all boards that share the same architecture are moved to the same arch folder following the soc layout Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * sim: group boards by architecture all boards that share the same architecture are moved to the same arch folder following the soc layout Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * risc-v: group boards by architecture all boards that share the same architecture are moved to the same arch folder following the soc layout Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * renesas: group boards by architecture all boards that share the same architecture are moved to the same arch folder following the soc layout Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * or1k: group boards by architecture all boards that share the same architecture are moved to the same arch folder following the soc layout Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * misoc: group boards by architecture all boards that share the same architecture are moved to the same arch folder following the soc layout Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * mips: group boards by architecture all boards that share the same architecture are moved to the same arch folder following the soc layout Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * hc: group boards by architecture all boards that share the same architecture are moved to the same arch folder following the soc layout Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * avr: group boards by architecture all boards that share the same architecture are moved to the same arch folder following the soc layout Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * arm: group boards by architecture all boards that share the same architecture are moved to the same arch folder following the soc layout Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * boards: group boards by architecture Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> Approved-by: Gregory Nutt <gnutt@nuttx.org>	2019-08-06 14:37:27 +00:00
Alin Jerpelea	31e87abd1c	Merged in alinjerpelea/nuttx (pull request #964 ) move board configs to configs folder * amber: move board configs to configs folder This is a cleanup that will move all configs from the board folder to a board/configs folder NOTE: The configure.sh script must be used with the new path <board-name>/configs/<config-name> Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * arduino-due: move board configs to configs folder This is a cleanup that will move all configs from the board folder to a board/configs folder NOTE: The configure.sh script must be used with the new path <board-name>/configs/<config-name> Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * arduino-mega: move board configs to configs folder This is a cleanup that will move all configs from the board folder to a board/configs folder NOTE: The configure.sh script must be used with the new path <board-name>/configs/<config-name> Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * avr32dev1: move board configs to configs folder This is a cleanup that will move all configs from the board folder to a board/configs folder NOTE: The configure.sh script must be used with the new path <board-name>/configs/<config-name> Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * axoloti: move board configs to configs folder This is a cleanup that will move all configs from the board folder to a board/configs folder NOTE: The configure.sh script must be used with the new path <board-name>/configs/<config-name> Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * b-l072z-lrwan1: move board configs to configs folder This is a cleanup that will move all configs from the board folder to a board/configs folder NOTE: The configure.sh script must be used with the new path <board-name>/configs/<config-name> Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * b-l475e-iot01a: move board configs to configs folder This is a cleanup that will move all configs from the board folder to a board/configs folder NOTE: The configure.sh script must be used with the new path <board-name>/configs/<config-name> Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * bambino-200e: move board configs to configs folder This is a cleanup that will move all configs from the board folder to a board/configs folder NOTE: The configure.sh script must be used with the new path <board-name>/configs/<config-name> Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * beaglebone-black: move board configs to configs folder This is a cleanup that will move all configs from the board folder to a board/configs folder NOTE: The configure.sh script must be used with the new path <board-name>/configs/<config-name> Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * c5471evm: move board configs to configs folder This is a cleanup that will move all configs from the board folder to a board/configs folder NOTE: The configure.sh script must be used with the new path <board-name>/configs/<config-name> Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * clicker2-stm32: move board configs to configs folder This is a cleanup that will move all configs from the board folder to a board/configs folder NOTE: The configure.sh script must be used with the new path <board-name>/configs/<config-name> Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * cloudctrl: move board configs to configs folder This is a cleanup that will move all configs from the board folder to a board/configs folder NOTE: The configure.sh script must be used with the new path <board-name>/configs/<config-name> Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * demo9s12ne64: move board configs to configs folder This is a cleanup that will move all configs from the board folder to a board/configs folder NOTE: The configure.sh script must be used with the new path <board-name>/configs/<config-name> Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * dk-tm4c129x: move board configs to configs folder This is a cleanup that will move all configs from the board folder to a board/configs folder NOTE: The configure.sh script must be used with the new path <board-name>/configs/<config-name> Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * ea3131: move board configs to configs folder This is a cleanup that will move all configs from the board folder to a board/configs folder NOTE: The configure.sh script must be used with the new path <board-name>/configs/<config-name> Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * ea3152: move board configs to configs folder This is a cleanup that will move all configs from the board folder to a board/configs folder NOTE: The configure.sh script must be used with the new path <board-name>/configs/<config-name> Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * eagle100: move board configs to configs folder This is a cleanup that will move all configs from the board folder to a board/configs folder NOTE: The configure.sh script must be used with the new path <board-name>/configs/<config-name> Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * efm32-g8xx-stk: move board configs to configs folder This is a cleanup that will move all configs from the board folder to a board/configs folder NOTE: The configure.sh script must be used with the new path <board-name>/configs/<config-name> Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * efm32gg-stk3700: move board configs to configs folder This is a cleanup that will move all configs from the board folder to a board/configs folder NOTE: The configure.sh script must be used with the new path <board-name>/configs/<config-name> Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * ekk-lm3s9b96: move board configs to configs folder This is a cleanup that will move all configs from the board folder to a board/configs folder NOTE: The configure.sh script must be used with the new path <board-name>/configs/<config-name> Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * esp32-core: move board configs to configs folder This is a cleanup that will move all configs from the board folder to a board/configs folder NOTE: The configure.sh script must be used with the new path <board-name>/configs/<config-name> Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * ez80f910200kitg: move board configs to configs folder This is a cleanup that will move all configs from the board folder to a board/configs folder NOTE: The configure.sh script must be used with the new path <board-name>/configs/<config-name> Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * ez80f910200zco: move board configs to configs folder This is a cleanup that will move all configs from the board folder to a board/configs folder NOTE: The configure.sh script must be used with the new path <board-name>/configs/<config-name> Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * fire-stm32v2: move board configs to configs folder This is a cleanup that will move all configs from the board folder to a board/configs folder NOTE: The configure.sh script must be used with the new path <board-name>/configs/<config-name> Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * flipnclick-pic32mz: move board configs to configs folder This is a cleanup that will move all configs from the board folder to a board/configs folder NOTE: The configure.sh script must be used with the new path <board-name>/configs/<config-name> Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * flipnclick-sam3x: move board configs to configs folder This is a cleanup that will move all configs from the board folder to a board/configs folder NOTE: The configure.sh script must be used with the new path <board-name>/configs/<config-name> Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * freedom-k28f: move board configs to configs folder This is a cleanup that will move all configs from the board folder to a board/configs folder NOTE: The configure.sh script must be used with the new path <board-name>/configs/<config-name> Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * freedom-k64f: move board configs to configs folder This is a cleanup that will move all configs from the board folder to a board/configs folder NOTE: The configure.sh script must be used with the new path <board-name>/configs/<config-name> Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * freedom-k66f: move board configs to configs folder This is a cleanup that will move all configs from the board folder to a board/configs folder NOTE: The configure.sh script must be used with the new path <board-name>/configs/<config-name> Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * freedom-k125z: move board configs to configs folder This is a cleanup that will move all configs from the board folder to a board/configs folder NOTE: The configure.sh script must be used with the new path <board-name>/configs/<config-name> Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * freedom-k126z: move board configs to configs folder This is a cleanup that will move all configs from the board folder to a board/configs folder NOTE: The configure.sh script must be used with the new path <board-name>/configs/<config-name> Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * gapuino: move board configs to configs folder This is a cleanup that will move all configs from the board folder to a board/configs folder NOTE: The configure.sh script must be used with the new path <board-name>/configs/<config-name> Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * hymini-stm32v: move board configs to configs folder This is a cleanup that will move all configs from the board folder to a board/configs folder NOTE: The configure.sh script must be used with the new path <board-name>/configs/<config-name> Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * imxrt1050-evk: move board configs to configs folder This is a cleanup that will move all configs from the board folder to a board/configs folder NOTE: The configure.sh script must be used with the new path <board-name>/configs/<config-name> Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * imxrt1060-evk: move board configs to configs folder This is a cleanup that will move all configs from the board folder to a board/configs folder NOTE: The configure.sh script must be used with the new path <board-name>/configs/<config-name> Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * kwikstik-k40: move board configs to configs folder This is a cleanup that will move all configs from the board folder to a board/configs folder NOTE: The configure.sh script must be used with the new path <board-name>/configs/<config-name> Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * launchxl-cc1310: move board configs to configs folder This is a cleanup that will move all configs from the board folder to a board/configs folder NOTE: The configure.sh script must be used with the new path <board-name>/configs/<config-name> Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * launchxl-cc1312r1: move board configs to configs folder This is a cleanup that will move all configs from the board folder to a board/configs folder NOTE: The configure.sh script must be used with the new path <board-name>/configs/<config-name> Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * launchxl-tms57004: move board configs to configs folder This is a cleanup that will move all configs from the board folder to a board/configs folder NOTE: The configure.sh script must be used with the new path <board-name>/configs/<config-name> Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * lc823450-xgevk: move board configs to configs folder This is a cleanup that will move all configs from the board folder to a board/configs folder NOTE: The configure.sh script must be used with the new path <board-name>/configs/<config-name> Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * lincoln60: move board configs to configs folder This is a cleanup that will move all configs from the board folder to a board/configs folder NOTE: The configure.sh script must be used with the new path <board-name>/configs/<config-name> Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * lm3s6432-s2e: move board configs to configs folder This is a cleanup that will move all configs from the board folder to a board/configs folder NOTE: The configure.sh script must be used with the new path <board-name>/configs/<config-name> Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * lm3s6965-ek: move board configs to configs folder This is a cleanup that will move all configs from the board folder to a board/configs folder NOTE: The configure.sh script must be used with the new path <board-name>/configs/<config-name> Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * lm3s8962-ek: move board configs to configs folder This is a cleanup that will move all configs from the board folder to a board/configs folder NOTE: The configure.sh script must be used with the new path <board-name>/configs/<config-name> Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * lm4f120-launchpad: move board configs to configs folder This is a cleanup that will move all configs from the board folder to a board/configs folder NOTE: The configure.sh script must be used with the new path <board-name>/configs/<config-name> Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * lpc4088-devkit: move board configs to configs folder This is a cleanup that will move all configs from the board folder to a board/configs folder NOTE: The configure.sh script must be used with the new path <board-name>/configs/<config-name> Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * lpc4088-quickstart: move board configs to configs folder This is a cleanup that will move all configs from the board folder to a board/configs folder NOTE: The configure.sh script must be used with the new path <board-name>/configs/<config-name> Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * lpc4330-xplorer: move board configs to configs folder This is a cleanup that will move all configs from the board folder to a board/configs folder NOTE: The configure.sh script must be used with the new path <board-name>/configs/<config-name> Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * lpc4337-ws: move board configs to configs folder This is a cleanup that will move all configs from the board folder to a board/configs folder NOTE: The configure.sh script must be used with the new path <board-name>/configs/<config-name> Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * lpc4357-evb: move board configs to configs folder This is a cleanup that will move all configs from the board folder to a board/configs folder NOTE: The configure.sh script must be used with the new path <board-name>/configs/<config-name> Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * lpc4370-link2: move board configs to configs folder This is a cleanup that will move all configs from the board folder to a board/configs folder NOTE: The configure.sh script must be used with the new path <board-name>/configs/<config-name> Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * lpcxpresso-lpc1768: move board configs to configs folder This is a cleanup that will move all configs from the board folder to a board/configs folder NOTE: The configure.sh script must be used with the new path <board-name>/configs/<config-name> Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * lpcxpresso-lpc54628: move board configs to configs folder This is a cleanup that will move all configs from the board folder to a board/configs folder NOTE: The configure.sh script must be used with the new path <board-name>/configs/<config-name> Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * makerlisp: move board configs to configs folder This is a cleanup that will move all configs from the board folder to a board/configs folder NOTE: The configure.sh script must be used with the new path <board-name>/configs/<config-name> Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * maple: move board configs to configs folder This is a cleanup that will move all configs from the board folder to a board/configs folder NOTE: The configure.sh script must be used with the new path <board-name>/configs/<config-name> Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * max32660-evsys: move board configs to configs folder This is a cleanup that will move all configs from the board folder to a board/configs folder NOTE: The configure.sh script must be used with the new path <board-name>/configs/<config-name> Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * mbed: move board configs to configs folder This is a cleanup that will move all configs from the board folder to a board/configs folder NOTE: The configure.sh script must be used with the new path <board-name>/configs/<config-name> Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * mbc1700: move board configs to configs folder This is a cleanup that will move all configs from the board folder to a board/configs folder NOTE: The configure.sh script must be used with the new path <board-name>/configs/<config-name> Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * mcu123-lpc214x: move board configs to configs folder This is a cleanup that will move all configs from the board folder to a board/configs folder NOTE: The configure.sh script must be used with the new path <board-name>/configs/<config-name> Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * metro-m4: move board configs to configs folder This is a cleanup that will move all configs from the board folder to a board/configs folder NOTE: The configure.sh script must be used with the new path <board-name>/configs/<config-name> Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * micropendous3: move board configs to configs folder This is a cleanup that will move all configs from the board folder to a board/configs folder NOTE: The configure.sh script must be used with the new path <board-name>/configs/<config-name> Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * mikroe-stm32f4: move board configs to configs folder This is a cleanup that will move all configs from the board folder to a board/configs folder NOTE: The configure.sh script must be used with the new path <board-name>/configs/<config-name> Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * mirtoo: move board configs to configs folder This is a cleanup that will move all configs from the board folder to a board/configs folder NOTE: The configure.sh script must be used with the new path <board-name>/configs/<config-name> Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * misoc: move board configs to configs folder This is a cleanup that will move all configs from the board folder to a board/configs folder NOTE: The configure.sh script must be used with the new path <board-name>/configs/<config-name> Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * moteino-mega: move board configs to configs folder This is a cleanup that will move all configs from the board folder to a board/configs folder NOTE: The configure.sh script must be used with the new path <board-name>/configs/<config-name> Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * moxa: move board configs to configs folder This is a cleanup that will move all configs from the board folder to a board/configs folder NOTE: The configure.sh script must be used with the new path <board-name>/configs/<config-name> Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * ne64badge: move board configs to configs folder This is a cleanup that will move all configs from the board folder to a board/configs folder NOTE: The configure.sh script must be used with the new path <board-name>/configs/<config-name> Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * nr5m100-nexys4: move board configs to configs folder This is a cleanup that will move all configs from the board folder to a board/configs folder NOTE: The configure.sh script must be used with the new path <board-name>/configs/<config-name> Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * nrf52-generic: move board configs to configs folder This is a cleanup that will move all configs from the board folder to a board/configs folder NOTE: The configure.sh script must be used with the new path <board-name>/configs/<config-name> Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * ntosd-dm320: move board configs to configs folder This is a cleanup that will move all configs from the board folder to a board/configs folder NOTE: The configure.sh script must be used with the new path <board-name>/configs/<config-name> Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * nucleo-144: move board configs to configs folder This is a cleanup that will move all configs from the board folder to a board/configs folder NOTE: The configure.sh script must be used with the new path <board-name>/configs/<config-name> Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * nucleo-f072rb: move board configs to configs folder This is a cleanup that will move all configs from the board folder to a board/configs folder NOTE: The configure.sh script must be used with the new path <board-name>/configs/<config-name> Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * nucleo-f091rc: move board configs to configs folder This is a cleanup that will move all configs from the board folder to a board/configs folder NOTE: The configure.sh script must be used with the new path <board-name>/configs/<config-name> Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * nucleo-f103rb: move board configs to configs folder This is a cleanup that will move all configs from the board folder to a board/configs folder NOTE: The configure.sh script must be used with the new path <board-name>/configs/<config-name> Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * nucleo-f207zg: move board configs to configs folder This is a cleanup that will move all configs from the board folder to a board/configs folder NOTE: The configure.sh script must be used with the new path <board-name>/configs/<config-name> Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * nucleo-f302r8: move board configs to configs folder This is a cleanup that will move all configs from the board folder to a board/configs folder NOTE: The configure.sh script must be used with the new path <board-name>/configs/<config-name> Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * nucleo-f303re: move board configs to configs folder This is a cleanup that will move all configs from the board folder to a board/configs folder NOTE: The configure.sh script must be used with the new path <board-name>/configs/<config-name> Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * nucleo-f303ze: move board configs to configs folder This is a cleanup that will move all configs from the board folder to a board/configs folder NOTE: The configure.sh script must be used with the new path <board-name>/configs/<config-name> Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * nucleo-f334r8: move board configs to configs folder This is a cleanup that will move all configs from the board folder to a board/configs folder NOTE: The configure.sh script must be used with the new path <board-name>/configs/<config-name> Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * nucleo-f410rb: move board configs to configs folder This is a cleanup that will move all configs from the board folder to a board/configs folder NOTE: The configure.sh script must be used with the new path <board-name>/configs/<config-name> Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * nucleo-f446re: move board configs to configs folder This is a cleanup that will move all configs from the board folder to a board/configs folder NOTE: The configure.sh script must be used with the new path <board-name>/configs/<config-name> Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * nucleo-f4x1re: move board configs to configs folder This is a cleanup that will move all configs from the board folder to a board/configs folder NOTE: The configure.sh script must be used with the new path <board-name>/configs/<config-name> Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * nucleo-g071rb: move board configs to configs folder This is a cleanup that will move all configs from the board folder to a board/configs folder NOTE: The configure.sh script must be used with the new path <board-name>/configs/<config-name> Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * nucleo-h743zi: move board configs to configs folder This is a cleanup that will move all configs from the board folder to a board/configs folder NOTE: The configure.sh script must be used with the new path <board-name>/configs/<config-name> Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * nucleo-l073rz: move board configs to configs folder This is a cleanup that will move all configs from the board folder to a board/configs folder NOTE: The configure.sh script must be used with the new path <board-name>/configs/<config-name> Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * nucleo-l152re: move board configs to configs folder This is a cleanup that will move all configs from the board folder to a board/configs folder NOTE: The configure.sh script must be used with the new path <board-name>/configs/<config-name> Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * nucleo-l432kc: move board configs to configs folder This is a cleanup that will move all configs from the board folder to a board/configs folder NOTE: The configure.sh script must be used with the new path <board-name>/configs/<config-name> Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * nucleo-l452re: move board configs to configs folder This is a cleanup that will move all configs from the board folder to a board/configs folder NOTE: The configure.sh script must be used with the new path <board-name>/configs/<config-name> Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * nucleo-l476rg: move board configs to configs folder This is a cleanup that will move all configs from the board folder to a board/configs folder NOTE: The configure.sh script must be used with the new path <board-name>/configs/<config-name> Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * nucleo-l496zg: move board configs to configs folder This is a cleanup that will move all configs from the board folder to a board/configs folder NOTE: The configure.sh script must be used with the new path <board-name>/configs/<config-name> Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * nutiny-nuc120: move board configs to configs folder This is a cleanup that will move all configs from the board folder to a board/configs folder NOTE: The configure.sh script must be used with the new path <board-name>/configs/<config-name> Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * olimex-efm32g880f128-stk: move board configs to configs folder This is a cleanup that will move all configs from the board folder to a board/configs folder NOTE: The configure.sh script must be used with the new path <board-name>/configs/<config-name> Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * olimex-lpc-h3131: move board configs to configs folder This is a cleanup that will move all configs from the board folder to a board/configs folder NOTE: The configure.sh script must be used with the new path <board-name>/configs/<config-name> Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * olimex-lpc1766stk: move board configs to configs folder This is a cleanup that will move all configs from the board folder to a board/configs folder NOTE: The configure.sh script must be used with the new path <board-name>/configs/<config-name> Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * olimex-lpc2378: move board configs to configs folder This is a cleanup that will move all configs from the board folder to a board/configs folder NOTE: The configure.sh script must be used with the new path <board-name>/configs/<config-name> Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * olimex-stm32-e407: move board configs to configs folder This is a cleanup that will move all configs from the board folder to a board/configs folder NOTE: The configure.sh script must be used with the new path <board-name>/configs/<config-name> Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * olimex-stm32-h405: move board configs to configs folder This is a cleanup that will move all configs from the board folder to a board/configs folder NOTE: The configure.sh script must be used with the new path <board-name>/configs/<config-name> Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * olimex-stm32-h407: move board configs to configs folder This is a cleanup that will move all configs from the board folder to a board/configs folder NOTE: The configure.sh script must be used with the new path <board-name>/configs/<config-name> Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * olimex-stm32-p107: move board configs to configs folder This is a cleanup that will move all configs from the board folder to a board/configs folder NOTE: The configure.sh script must be used with the new path <board-name>/configs/<config-name> Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * olimex-stm32-p207: move board configs to configs folder This is a cleanup that will move all configs from the board folder to a board/configs folder NOTE: The configure.sh script must be used with the new path <board-name>/configs/<config-name> Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * olimex-stm32-p407: move board configs to configs folder This is a cleanup that will move all configs from the board folder to a board/configs folder NOTE: The configure.sh script must be used with the new path <board-name>/configs/<config-name> Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * olimex-strp711: move board configs to configs folder This is a cleanup that will move all configs from the board folder to a board/configs folder NOTE: The configure.sh script must be used with the new path <board-name>/configs/<config-name> Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * olimexino-stm32: move board configs to configs folder This is a cleanup that will move all configs from the board folder to a board/configs folder NOTE: The configure.sh script must be used with the new path <board-name>/configs/<config-name> Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * omnibusf4: move board configs to configs folder This is a cleanup that will move all configs from the board folder to a board/configs folder NOTE: The configure.sh script must be used with the new path <board-name>/configs/<config-name> Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * open1788: move board configs to configs folder This is a cleanup that will move all configs from the board folder to a board/configs folder NOTE: The configure.sh script must be used with the new path <board-name>/configs/<config-name> Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * or1k: move board configs to configs folder This is a cleanup that will move all configs from the board folder to a board/configs folder NOTE: The configure.sh script must be used with the new path <board-name>/configs/<config-name> Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * p112: move board configs to configs folder This is a cleanup that will move all configs from the board folder to a board/configs folder NOTE: The configure.sh script must be used with the new path <board-name>/configs/<config-name> Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * pcduino-a10: move board configs to configs folder This is a cleanup that will move all configs from the board folder to a board/configs folder NOTE: The configure.sh script must be used with the new path <board-name>/configs/<config-name> Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * photon: move board configs to configs folder This is a cleanup that will move all configs from the board folder to a board/configs folder NOTE: The configure.sh script must be used with the new path <board-name>/configs/<config-name> Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * pic32mx-starterkit: move board configs to configs folder This is a cleanup that will move all configs from the board folder to a board/configs folder NOTE: The configure.sh script must be used with the new path <board-name>/configs/<config-name> Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * pic32mx7mmb: move board configs to configs folder This is a cleanup that will move all configs from the board folder to a board/configs folder NOTE: The configure.sh script must be used with the new path <board-name>/configs/<config-name> Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * pic32mz-starterkit: move board configs to configs folder This is a cleanup that will move all configs from the board folder to a board/configs folder NOTE: The configure.sh script must be used with the new path <board-name>/configs/<config-name> Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * pnev5180b: move board configs to configs folder This is a cleanup that will move all configs from the board folder to a board/configs folder NOTE: The configure.sh script must be used with the new path <board-name>/configs/<config-name> Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * qemu-i486: move board configs to configs folder This is a cleanup that will move all configs from the board folder to a board/configs folder NOTE: The configure.sh script must be used with the new path <board-name>/configs/<config-name> Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * sabre-6quad: move board configs to configs folder This is a cleanup that will move all configs from the board folder to a board/configs folder NOTE: The configure.sh script must be used with the new path <board-name>/configs/<config-name> Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * sam3u-ek: move board configs to configs folder This is a cleanup that will move all configs from the board folder to a board/configs folder NOTE: The configure.sh script must be used with the new path <board-name>/configs/<config-name> Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * sam4cmp-db: move board configs to configs folder This is a cleanup that will move all configs from the board folder to a board/configs folder NOTE: The configure.sh script must be used with the new path <board-name>/configs/<config-name> Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * sam4e-ek: move board configs to configs folder This is a cleanup that will move all configs from the board folder to a board/configs folder NOTE: The configure.sh script must be used with the new path <board-name>/configs/<config-name> Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * sam4l-xplained: move board configs to configs folder This is a cleanup that will move all configs from the board folder to a board/configs folder NOTE: The configure.sh script must be used with the new path <board-name>/configs/<config-name> Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * sam4s-xplained: move board configs to configs folder This is a cleanup that will move all configs from the board folder to a board/configs folder NOTE: The configure.sh script must be used with the new path <board-name>/configs/<config-name> Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * sam4s-xplained-pro: move board configs to configs folder This is a cleanup that will move all configs from the board folder to a board/configs folder NOTE: The configure.sh script must be used with the new path <board-name>/configs/<config-name> Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * sama5d2-xult: move board configs to configs folder This is a cleanup that will move all configs from the board folder to a board/configs folder NOTE: The configure.sh script must be used with the new path <board-name>/configs/<config-name> Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * sama5d3-xplained: move board configs to configs folder This is a cleanup that will move all configs from the board folder to a board/configs folder NOTE: The configure.sh script must be used with the new path <board-name>/configs/<config-name> Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * sama5d3x-ek: move board configs to configs folder This is a cleanup that will move all configs from the board folder to a board/configs folder NOTE: The configure.sh script must be used with the new path <board-name>/configs/<config-name> Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * sama5d4-ek: move board configs to configs folder This is a cleanup that will move all configs from the board folder to a board/configs folder NOTE: The configure.sh script must be used with the new path <board-name>/configs/<config-name> Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * samd20-xplained: move board configs to configs folder This is a cleanup that will move all configs from the board folder to a board/configs folder NOTE: The configure.sh script must be used with the new path <board-name>/configs/<config-name> Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * samd21-xplained: move board configs to configs folder This is a cleanup that will move all configs from the board folder to a board/configs folder NOTE: The configure.sh script must be used with the new path <board-name>/configs/<config-name> Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * same70-xplained: move board configs to configs folder This is a cleanup that will move all configs from the board folder to a board/configs folder NOTE: The configure.sh script must be used with the new path <board-name>/configs/<config-name> Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * saml21-xplained: move board configs to configs folder This is a cleanup that will move all configs from the board folder to a board/configs folder NOTE: The configure.sh script must be used with the new path <board-name>/configs/<config-name> Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * samv71-xult: move board configs to configs folder This is a cleanup that will move all configs from the board folder to a board/configs folder NOTE: The configure.sh script must be used with the new path <board-name>/configs/<config-name> Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * shenzhou: move board configs to configs folder This is a cleanup that will move all configs from the board folder to a board/configs folder NOTE: The configure.sh script must be used with the new path <board-name>/configs/<config-name> Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * sim: move board configs to configs folder This is a cleanup that will move all configs from the board folder to a board/configs folder NOTE: The configure.sh script must be used with the new path <board-name>/configs/<config-name> Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * skp16c26: move board configs to configs folder This is a cleanup that will move all configs from the board folder to a board/configs folder NOTE: The configure.sh script must be used with the new path <board-name>/configs/<config-name> Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * spresense: move board configs to configs folder This is a cleanup that will move all configs from the board folder to a board/configs folder NOTE: The configure.sh script must be used with the new path <board-name>/configs/<config-name> Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * stm3210e-eval: move board configs to configs folder This is a cleanup that will move all configs from the board folder to a board/configs folder NOTE: The configure.sh script must be used with the new path <board-name>/configs/<config-name> Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * stm3220g-eval: move board configs to configs folder This is a cleanup that will move all configs from the board folder to a board/configs folder NOTE: The configure.sh script must be used with the new path <board-name>/configs/<config-name> Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * stm3240g-eval: move board configs to configs folder This is a cleanup that will move all configs from the board folder to a board/configs folder NOTE: The configure.sh script must be used with the new path <board-name>/configs/<config-name> Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * stm32_tiny: move board configs to configs folder This is a cleanup that will move all configs from the board folder to a board/configs folder NOTE: The configure.sh script must be used with the new path <board-name>/configs/<config-name> Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * stm32butterfly2: move board configs to configs folder This is a cleanup that will move all configs from the board folder to a board/configs folder NOTE: The configure.sh script must be used with the new path <board-name>/configs/<config-name> Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * stm32f051-discovery: move board configs to configs folder This is a cleanup that will move all configs from the board folder to a board/configs folder NOTE: The configure.sh script must be used with the new path <board-name>/configs/<config-name> Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * stm32f072-discovery: move board configs to configs folder This is a cleanup that will move all configs from the board folder to a board/configs folder NOTE: The configure.sh script must be used with the new path <board-name>/configs/<config-name> Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * stm32f103-minimum: move board configs to configs folder This is a cleanup that will move all configs from the board folder to a board/configs folder NOTE: The configure.sh script must be used with the new path <board-name>/configs/<config-name> Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * stm32f334-disco: move board configs to configs folder This is a cleanup that will move all configs from the board folder to a board/configs folder NOTE: The configure.sh script must be used with the new path <board-name>/configs/<config-name> Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * stm32f3discovery: move board configs to configs folder This is a cleanup that will move all configs from the board folder to a board/configs folder NOTE: The configure.sh script must be used with the new path <board-name>/configs/<config-name> Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * stm32f411e-disco: move board configs to configs folder This is a cleanup that will move all configs from the board folder to a board/configs folder NOTE: The configure.sh script must be used with the new path <board-name>/configs/<config-name> Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * stm32f429i-disco: move board configs to configs folder This is a cleanup that will move all configs from the board folder to a board/configs folder NOTE: The configure.sh script must be used with the new path <board-name>/configs/<config-name> Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * stm32f4discovery: move board configs to configs folder This is a cleanup that will move all configs from the board folder to a board/configs folder NOTE: The configure.sh script must be used with the new path <board-name>/configs/<config-name> Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * stm32f746-ws: move board configs to configs folder This is a cleanup that will move all configs from the board folder to a board/configs folder NOTE: The configure.sh script must be used with the new path <board-name>/configs/<config-name> Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * stm32f746g-disco: move board configs to configs folder This is a cleanup that will move all configs from the board folder to a board/configs folder NOTE: The configure.sh script must be used with the new path <board-name>/configs/<config-name> Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * stm32f769i-disco: move board configs to configs folder This is a cleanup that will move all configs from the board folder to a board/configs folder NOTE: The configure.sh script must be used with the new path <board-name>/configs/<config-name> Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * stm32l476-mdk: move board configs to configs folder This is a cleanup that will move all configs from the board folder to a board/configs folder NOTE: The configure.sh script must be used with the new path <board-name>/configs/<config-name> Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * stm32l476vg-disco: move board configs to configs folder This is a cleanup that will move all configs from the board folder to a board/configs folder NOTE: The configure.sh script must be used with the new path <board-name>/configs/<config-name> Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * stm32l4r9ai-disco: move board configs to configs folder This is a cleanup that will move all configs from the board folder to a board/configs folder NOTE: The configure.sh script must be used with the new path <board-name>/configs/<config-name> Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * stm32ldiscovery: move board configs to configs folder This is a cleanup that will move all configs from the board folder to a board/configs folder NOTE: The configure.sh script must be used with the new path <board-name>/configs/<config-name> Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * stm32vldiscovery: move board configs to configs folder This is a cleanup that will move all configs from the board folder to a board/configs folder NOTE: The configure.sh script must be used with the new path <board-name>/configs/<config-name> Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * sure-pic32mx: move board configs to configs folder This is a cleanup that will move all configs from the board folder to a board/configs folder NOTE: The configure.sh script must be used with the new path <board-name>/configs/<config-name> Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * teensy-2.0: move board configs to configs folder This is a cleanup that will move all configs from the board folder to a board/configs folder NOTE: The configure.sh script must be used with the new path <board-name>/configs/<config-name> Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * teensy-3.x: move board configs to configs folder This is a cleanup that will move all configs from the board folder to a board/configs folder NOTE: The configure.sh script must be used with the new path <board-name>/configs/<config-name> Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * teensy-lc: move board configs to configs folder This is a cleanup that will move all configs from the board folder to a board/configs folder NOTE: The configure.sh script must be used with the new path <board-name>/configs/<config-name> Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * tm4c123g-launchpad: move board configs to configs folder This is a cleanup that will move all configs from the board folder to a board/configs folder NOTE: The configure.sh script must be used with the new path <board-name>/configs/<config-name> Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * tm4c1294-launchpad: move board configs to configs folder This is a cleanup that will move all configs from the board folder to a board/configs folder NOTE: The configure.sh script must be used with the new path <board-name>/configs/<config-name> Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * tms570ls31x-usb-kit: move board configs to configs folder This is a cleanup that will move all configs from the board folder to a board/configs folder NOTE: The configure.sh script must be used with the new path <board-name>/configs/<config-name> Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * twr-k60n512: move board configs to configs folder This is a cleanup that will move all configs from the board folder to a board/configs folder NOTE: The configure.sh script must be used with the new path <board-name>/configs/<config-name> Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * twr-k64f120m: move board configs to configs folder This is a cleanup that will move all configs from the board folder to a board/configs folder NOTE: The configure.sh script must be used with the new path <board-name>/configs/<config-name> Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * u-blox-c027: move board configs to configs folder This is a cleanup that will move all configs from the board folder to a board/configs folder NOTE: The configure.sh script must be used with the new path <board-name>/configs/<config-name> Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * ubw32: move board configs to configs folder This is a cleanup that will move all configs from the board folder to a board/configs folder NOTE: The configure.sh script must be used with the new path <board-name>/configs/<config-name> Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * viewtool-stm32f107: move board configs to configs folder This is a cleanup that will move all configs from the board folder to a board/configs folder NOTE: The configure.sh script must be used with the new path <board-name>/configs/<config-name> Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * us7032evb1: move board configs to configs folder This is a cleanup that will move all configs from the board folder to a board/configs folder NOTE: The configure.sh script must be used with the new path <board-name>/configs/<config-name> Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * xmc4500-relax: move board configs to configs folder This is a cleanup that will move all configs from the board folder to a board/configs folder NOTE: The configure.sh script must be used with the new path <board-name>/configs/<config-name> Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * z16f2800100zcog: move board configs to configs folder This is a cleanup that will move all configs from the board folder to a board/configs folder NOTE: The configure.sh script must be used with the new path <board-name>/configs/<config-name> Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * z80sim: move board configs to configs folder This is a cleanup that will move all configs from the board folder to a board/configs folder NOTE: The configure.sh script must be used with the new path <board-name>/configs/<config-name> Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * z8encore000zco: move board configs to configs folder This is a cleanup that will move all configs from the board folder to a board/configs folder NOTE: The configure.sh script must be used with the new path <board-name>/configs/<config-name> Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * z8f64200100kit: move board configs to configs folder This is a cleanup that will move all configs from the board folder to a board/configs folder NOTE: The configure.sh script must be used with the new path <board-name>/configs/<config-name> Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * zkit-arm-1769: move board configs to configs folder This is a cleanup that will move all configs from the board folder to a board/configs folder NOTE: The configure.sh script must be used with the new path <board-name>/configs/<config-name> Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * zp214xpa: move board configs to configs folder This is a cleanup that will move all configs from the board folder to a board/configs folder NOTE: The configure.sh script must be used with the new path <board-name>/configs/<config-name> Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * tools: configure.sh: adjust the script to use boards/configs folder Script update to pick the configs from the new configuration folder Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * tools: configure.bat: adjust the script to use boards/configs folder Now we update the script to pick the configs from the new configuration folder Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> Approved-by: Gregory Nutt <gnutt@nuttx.org>	2019-08-05 14:30:34 +00:00
Gregory Nutt	615c0ea7ee	Change naming configs/ to boards in comments, Documentation, etc. Still a few more to go.	2019-08-05 07:13:48 -06:00
Alin Jerpelea	a1c991d921	Merged in alinjerpelea/nuttx (pull request #963 ) Move boards to boards folder * boards: rename configs folder to boards This is the proposed layout after the change: boards: - folder containing board folders <board>: - name of each board drivers: - extra drivers specific for platform include: - header files for the boars scripts: - extra scripts specific for platform src: - board specific code tools: - extra tools specific for platform <config>: - board specific configuration(s) Note: <xxx> names are dependent on platform This is a logical change to aim to the arch layout but this is a huge change it should be done in several steps to lower the risk. Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * Kconfig: replace configs with boards The change is needed after the path change Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * Makefile: replace configs with boards The change is needed after the path change Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * Makefile.: replace configs with boards The change is needed after the path change Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> Make.defs: replace configs with boards The change is needed after the path change Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * .sh: replace configs with boards The change is needed after the path change Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * .mk: replace configs with boards The change is needed after the path change Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * .c & .h: replace configs with boards The change is needed after the path change Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * .bat: replace configs with boards The change is needed after the path change Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> Approved-by: Gregory Nutt <gnutt@nuttx.org>	2019-08-05 12:04:14 +00:00

16 Commits