Gregory Nutt
|
76007d28f5
|
Add support for dumping board-specific information on assertion. From David Sidrane
|
2015-03-04 07:00:29 -06:00 |
|
Gregory Nutt
|
beaf976626
|
arch/: board function prototypes are now in include/nuttx/board.h. Remove from architecture header file; Add inclusion of nuttx/board.h to all files referencing board functions
|
2015-02-27 17:19:38 -06:00 |
|
Gregory Nutt
|
4f9998b4a8
|
Big, very risky change: Remove all occurrences of up_maskack_irq() that disable and enable interrupts with up_ack_irq() that only acknowledges the interrupts. This is only used in interrupt decoding logic. Also remove the logic that unconditionally re-enables interrupts with the interrupt exits. This interferes with the drivers ability to control the interrupt state. This is a necessary, sweeping, global change and unfortunately impossible to test.
|
2015-02-09 16:12:11 -06:00 |
|
Gregory Nutt
|
3465cb6138
|
SYSLOG: Add an option to use the syslog'ing device as the system consolution. This option enables a low-level, write-only console device at /dev/console (similar to the low-level UART console device). From Pierre-noel Bouteville.
|
2015-02-08 06:53:24 -06:00 |
|
Gregory Nutt
|
7e46e94546
|
Remove CONFIG_DEBUG_STACK. Adding CONFIG_STACK_COLORATION makes this configuration option pointless
|
2015-01-24 06:49:51 -06:00 |
|
Gregory Nutt
|
7b310711a1
|
Update everything under nuttx/arch to use the corrected syslog interfaces
|
2014-10-08 12:48:47 -06:00 |
|
Gregory Nutt
|
56dc80cf59
|
The 'make export' target needs to bundle up the user C startup file (crt0), not the kernel head object
|
2014-09-04 13:31:34 -06:00 |
|
Gregory Nutt
|
64ab35b399
|
There used to be two ways to pass parameters to new tasks, depending upon the configuration: Either (1) argv[] as created as an array with each string strdup'ed. Or (1) argv[] array and strings were created on the stack before the new task was started. Now, there is only one way, way (1). Way (2) might be slightly more compact, but this is not worth carry the complexity of two different ways of doing the same thing.
|
2014-09-01 15:39:34 -06:00 |
|
Gregory Nutt
|
9aca0c1c84
|
Rename kumalloc to kumm_malloc and kuzalloc to kumm_zalloc for consistency with other naming
|
2014-08-31 16:24:24 -06:00 |
|
Gregory Nutt
|
e3ff0689bb
|
Rename CONFIG_NUTTX_KERNEL to CONFIG_BUILD_PROTECTED; Partially integrate new CONFIG_BUILD_KERNEL
|
2014-08-29 14:47:22 -06:00 |
|
Gregory Nutt
|
e1769b22f1
|
Remove os_internal.h it has been replace by several new header files under sched/. There have been some sneak inclusion paths via os_internal.h, so expect a few compilation errors for some architectures
|
2014-08-08 18:39:28 -06:00 |
|
Gregory Nutt
|
d798dd37a7
|
Replace os_internal.h with sched/sched.h in files that actually reference something in sched.h
|
2014-08-08 17:53:55 -06:00 |
|
Gregory Nutt
|
23a334c066
|
Move task control files from sched/ to sched/task
|
2014-08-08 16:44:08 -06:00 |
|
Gregory Nutt
|
d4b56eb3cc
|
Move clock functions from sched/ to sched/clock
|
2014-08-08 14:43:02 -06:00 |
|
Gregory Nutt
|
c9661ad5a7
|
Change all time conversions. Yech. New timer units in microseconds breaks all existing logic that used milliseconds in the conversions. Something likely got broken doing this, probably because I confused a MSEC2TICK conversion with a TICK2MSEC conversion. Also, the tickless OS no appears fully functional and passes the OS test on the simulator with no errors
|
2014-08-07 18:00:38 -06:00 |
|
Gregory Nutt
|
736d3c169a
|
Rename up_timerinit() to up_timer_initailize(); Add prototypes for candidate interfaces for the tickless OS; Don't build existing timer initialization logic if CONFIG_SCHED_TICKLESS is defined.
|
2014-08-06 16:26:01 -06:00 |
|
Gregory Nutt
|
11c29aebbc
|
Make sure that all references to up_prioritize_irq() are conditioned on CONFIG_ARCH_IRQPRIO. Noted by Make Smith
|
2014-05-20 17:48:39 -06:00 |
|
Gregory Nutt
|
7594d8b8cf
|
Add serial method so that lower half driver can provide RX flow control information. From Jussi Kivilinna
|
2014-05-08 09:00:33 -06:00 |
|
Gregory Nutt
|
40972de8d7
|
Fix spelling, only one t in exiting
|
2014-04-27 15:49:38 -06:00 |
|
Gregory Nutt
|
dce1723faf
|
Minor/cosmetic changes
|
2014-04-27 08:32:36 -06:00 |
|
Gregory Nutt
|
c46f1dc387
|
Zneo: ESPI needs to configure GPIO for ESPI
|
2014-04-26 13:58:38 -06:00 |
|
Gregory Nutt
|
1d4feaf88d
|
Zneo: Misc minor updates from debugging
|
2014-04-26 12:42:44 -06:00 |
|
Gregory Nutt
|
590f31a473
|
Zneo: Fix UART1 buffer setup
|
2014-04-26 10:51:29 -06:00 |
|
Gregory Nutt
|
fe80779eb7
|
ZNeo Serial: Need to configure UART1 alternate function
|
2014-04-26 09:43:40 -06:00 |
|
Gregory Nutt
|
f8671a7ab4
|
Zneo Serial: Fix cut'n'paste error in some conditional configuration
|
2014-04-26 08:23:11 -06:00 |
|
Gregory Nutt
|
7ee0706bc1
|
ZNeo: Calculation of timer reload and prescaler was wrong
|
2014-04-25 15:38:00 -06:00 |
|
Gregory Nutt
|
daf6d347fc
|
Updates to ZNeo configurations + misc cosmetic changes to comments
|
2014-04-25 11:59:17 -06:00 |
|
Gregory Nutt
|
688b64632d
|
16z: Reduce size of stacks
|
2014-04-25 09:56:07 -06:00 |
|
Gregory Nutt
|
31ede44671
|
Minor and cosmetic changes from initial 16z (v2) bringup
|
2014-04-24 15:55:53 -06:00 |
|
Gregory Nutt
|
e887473bde
|
ZNEO: Add ESPI driver
|
2014-04-24 12:52:34 -06:00 |
|
Gregory Nutt
|
f8024cf409
|
More trailing whilespace removal
|
2014-04-13 16:22:22 -06:00 |
|
Gregory Nutt
|
494387b33b
|
Make sure that there is one space after for
|
2014-04-12 13:28:22 -06:00 |
|
Gregory Nutt
|
2fcc57edb0
|
mv ramlog.h and syslog.h to new include/nuttx/syslog
|
2014-04-10 09:29:30 -06:00 |
|
Gregory Nutt
|
a2d53bf950
|
Add option to dump buffered USB trace data on an assertion
|
2014-03-20 10:56:30 -06:00 |
|
Gregory Nutt
|
91b002a043
|
Many changes to reduce complaints from CppCheck. Several latent bugs fixes, but probably some new typos introduced
|
2014-02-10 18:08:49 -06:00 |
|
Gregory Nutt
|
2f837ccd2a
|
rename up_led*() functions to board_led_*()
|
2014-01-24 14:28:49 -06:00 |
|
Gregory Nutt
|
f3f5378acc
|
The optimization level can now be selected as part of the configuration
|
2014-01-24 07:45:35 -06:00 |
|
Gregory Nutt
|
d2472c7494
|
Should enable external bus after configuring it
|
2014-01-23 17:41:29 -06:00 |
|
Gregory Nutt
|
806b01deef
|
16z: Fix option bits; adjust system clock frequency
|
2014-01-23 12:06:57 -06:00 |
|
Gregory Nutt
|
7f8c50aa51
|
16Z: Some early bring-up fixes
|
2014-01-22 13:46:42 -06:00 |
|
Gregory Nutt
|
564fe7e232
|
configs/16z: Add support for 16z board
|
2014-01-22 11:50:37 -06:00 |
|
Gregory Nutt
|
c49b0b09d9
|
ZNEO: Fix lost serial interrupt bug
|
2014-01-02 10:03:08 -06:00 |
|
Gregory Nutt
|
5a8517b849
|
Add Z16F NSH configuration
|
2014-01-01 12:40:18 -06:00 |
|
Gregory Nutt
|
67b5785d58
|
Kconfigs: Interrupt prioritization should not be automatically selected
|
2013-12-20 08:42:54 -06:00 |
|
Gregory Nutt
|
a00e2987c4
|
Various changes for a clean ZNEO ZDS-II build
|
2013-12-19 10:01:52 -06:00 |
|
Gregory Nutt
|
417f67c132
|
Clean up some naming: fd vs. fildes vs. filedes and filep vs filp
|
2013-09-28 16:50:07 -06:00 |
|
Gregory Nutt
|
7554d2888e
|
Upate .gitignore files. Add .dSYM. Make sure / is present where needed. Add some missing .gitignore files
|
2013-05-30 14:45:31 -06:00 |
|
Gregory Nutt
|
86b815373a
|
Remove up_assert_code
|
2013-04-25 15:19:59 -06:00 |
|
Gregory Nutt
|
69d3978837
|
Adding missing registration of /dev/zero; Condition registration of /dev/null. From Ken Petit
|
2013-04-24 07:17:49 -06:00 |
|
Gregory Nutt
|
5187631e30
|
_exit() should not call atexit() or on_exit() functions; Rename task_deletecurrent() to task_exit()
|
2013-04-18 16:15:20 -06:00 |