Most tools used for compliance and SBOM generation use SPDX identifiers
This change brings us a step closer to an easy SBOM generation.
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
reason:
1 We place interrupt handling functions of the same priority into the work queue corresponding
to that priority, allowing high-priority interrupts to preempt low-priority ones,
thus ensuring the real-time performance of high-priority interrupts.
2 The sole purpose of the interrupt handler is to wake
up the work queue of the corresponding priority and execute the interrupt handling function.
3 Compared to the functionality of isr threads, this
approach saves more memory, particularly when the number of interrupts is large.
Signed-off-by: hujun5 <hujun5@xiaomi.com>
purpose:
To improve the real-time performance of the system, we prefer to perform
as few operations as possible within the interrupt function.
We have designed an interrupt thread for each interrupt,
where all the operations that are not necessary to be handled
in the interrupt function are delegated to be processed by the interrupt thread.
Up_enable_irq will be invoked after isrthread started.
Configuring NuttX and compile:
$ ./tools/configure.sh -l qemu-armv8a:nsh_smp
$ make
Running with qemu
$ qemu-system-aarch64 -cpu cortex-a53 -smp 4 -nographic \
-machine virt,virtualization=on,gic-version=3 \
-net none -chardev stdio,id=con,mux=on -serial chardev:con \
-mon chardev=con,mode=readline -kernel ./nuttx
Signed-off-by: hujun5 <hujun5@xiaomi.com>
Summary:
- ARCH_GLOBAL_IRQDISABLE was initially introduced for LC823450 SMP
- At that time, i.MX6 (quad Cortex-A9) did not use this config
- However, this option is now used for all CPUs which support SMP
- So it's good timing for refactoring the code
Impact:
- Should have no impact because the logic is the same for SMP
Testing:
- Tested with board: spresense:smp, spresense:wifi_smp
- Tested with qemu: esp32-core:smp, maix-bit:smp, sabre-6quad:smp
- Build only: lc823450-xgevk:rndis, sam4cmp-db:nsh
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
fs/procfs/fs_procfsproc: Extended the process ID ProcFS output to show per-thread maximum time for pre-emption disabled and maximum time within a critical section.
sched/sched/sched_critmonitor.c: Adds data collection logic in support of monitoring critical sections and pre-emption state.
SMP: Introduce spin_lock_irqsave() and spin_unlock_irqrestore()
These APIs are simplified version of enter_critical_section() and
leave_critical_section() to protect data (e.g. registers) in SMP mode.
By using these APIs inside drivers, performace will be improved.
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
Approved-by: Gregory Nutt <gnutt@nuttx.org>
Alin Jerpelea