OrgApache/incubator-nuttx
OrgApache
/
incubator-nuttx
mirror of https://github.com/apache/incubator-nuttx.git
1
0
Fork 0
Code Issues Releases Wiki Activity

Back out M25P support -- its not ready yet 

git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@2939 42af7a65-404d-4744-a932-0658087f49c3
This commit is contained in:
patacongo 2010-09-11 03:24:26 +00:00
parent 1b649bc966
commit f7bc561d3b
5 changed files with 8 additions and 8 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

2
Documentation/NuttxPortingGuide.html
View File

@ -2596,7 +2596,7 @@ build
<li>
<code>CONFIG_PAGING_M25PX</code>:
Use the m25px.c FLASH driver.
If this is selected, then the MTD interface to the MP25x device will be used to support paging.
If this is selected, then the MTD interface to the M25Px device will be used to support paging.
</li>
<li>
<code>CONFIG_PAGING_M25PX_BINOFFSET</code>:

2
ReleaseNotes
View File

@ -1265,7 +1265,7 @@ for existing NuttX ports:
4-bpp greyscale support was integrated into the NX graphics sub-system and
verified using the TI/Luminary LP3S6965 Ethernet Evaluation Kit.
* The MP25Px driver was extended for the M24P1 FLASH part (see NOTE).
* The M25Px driver was extended for the M24P1 FLASH part (see NOTE).
* An I2C driver and (basic) SPI driver were added for the NXP LPC313x port.
The I2C interface definition was extended to efficiently handle multiple I2C

2
configs/README.txt
View File

@ -421,7 +421,7 @@ defconfig -- This is a configuration file similar to the Linux
CONFIG_PAGING_SDSLOT will instruct certain board-specific logic to
initialize the media in this SD slot.
CONFIG_PAGING_M25PX - Use the m25px.c FLASH driver. If this is selected,
then the MTD interface to the MP25x device will be used to support
then the MTD interface to the M25Px device will be used to support
paging.
CONFIG_PAGING_M25PX_BINOFFSET - If CONFIG_PAGING_M25PX is defined then
CONFIG_PAGING_M25PX_BINOFFSET will be used to specify the offset

4
configs/ea3131/pgnsh/defconfig
View File

@ -425,7 +425,7 @@ CONFIG_SIG_SIGWORK=4
# CONFIG_PAGING_SDSLOT will instruct certain board-specific logic to
# initialize the media in this SD slot.
# CONFIG_PAGING_M25PX - Use the m25px.c FLASH driver. If this is selected,
# then the MTD interface to the MP25x device will be used to support
# then the MTD interface to the M25Px device will be used to support
# paging.
# CONFIG_PAGING_M25PX_BINOFFSET - If CONFIG_PAGING_M25PX is defined then
# CONFIG_PAGING_M25PX_BINOFFSET will be used to specify the offset
@ -456,7 +456,7 @@ CONFIG_PAGING_BLOCKINGFILL=y
CONFIG_PAGING_MOUNTPT="/mnt/pgsrc"
CONFIG_PAGING_MINOR=0
CONFIG_PAGING_SDSLOT=0
CONFIG_PAGING_M25PX=y
CONFIG_PAGING_M25PX=n
CONFIG_PAGING_M25PX_BINOFFSET=0
CONFIG_PAGING_M25PX_SPIPORT=0

6
configs/ea3131/src/up_fillpage.c
View File

@ -188,7 +188,7 @@ struct pg_source_s
bool initialized; /* TRUE: we are initialized */
#endif
/* This is the MP25P* device state structure */
/* This is the M25P* device state structure */
FAR struct mtd_dev_s *mtd;
@ -435,7 +435,7 @@ int up_fillpage(FAR _TCB *tcb, FAR void *vpage)
#elif defined(CONFIG_PAGING_M25PX) /* !CONFIG_PAGING_BINPATH */
/* If CONFIG_PAGING_M25PX is defined, use the m25px.c FLASH driver. If this
* is selected, then the MTD interface to the MP25x device will be used to
* is selected, then the MTD interface to the M25Px device will be used to
* support paging.
*
* If the driver is configured to use interrupts or DMA, then it must be
@ -524,7 +524,7 @@ void weak_function lpc313x_pginitialize(void)
#elif defined(CONFIG_PAGING_M25PX)
/* If CONFIG_PAGING_M25PX is defined, use the m25px.c FLASH driver. If this
* is selected, then the MTD interface to the MP25x device will be used to
* is selected, then the MTD interface to the M25Px device will be used to
* support paging.
*
* If the driver is not configured to use interrupts or DMA, then it is