diff --git a/ChangeLog b/ChangeLog
index f685333cac..42e07a27f2 100644
--- a/ChangeLog
+++ b/ChangeLog
@@ -5646,5 +5646,8 @@
 	  if the packet is being sent out of our subnet (via a router).
 	  The fallback here is just to use "eth0" if the subnet lookup
 	  fails.  This will, of course, will have to be revisited if/when
-	  multiple NICs are supported (2013-9-27).
+	  multiple NICs are supported.  From Max Holtzberg (2013-9-27).
+	* net/send.c:  Fix some backward conditional logic in check
+	  to see if we should check if the ARP address in the table.  From
+	  Max Holzberg (2013-9-27).
 
diff --git a/arch/arm/src/sama5/sam_gmac.c b/arch/arm/src/sama5/sam_gmac.c
index b25d74b578..6971d7a85a 100644
--- a/arch/arm/src/sama5/sam_gmac.c
+++ b/arch/arm/src/sama5/sam_gmac.c
@@ -1831,7 +1831,7 @@ static void sam_phydump(struct sam_gmac_s *priv)
 static void sam_enablemdio(struct sam_gmac_s *priv)
 {
   uint32_t regval;
-  uint32_t enables;
+  uint32_t ncr;
 
   /* Enable management port */
 
@@ -2489,14 +2489,11 @@ static void sam_mdcclock(struct sam_gmac_s *priv)
 {
   uint32_t ncfgr;
   uint32_t ncr;
-  uint32_t enables;
 
   /* Disable RX and TX momentarily */
 
-  ncr  = sam_getreg(priv, SAM_GMAC_NCR);
-  enables = ncr & (GMAC_NCR_RXEN | GMAC_NCR_TXEN);
-  ncr &= ~(GMAC_NCR_RXEN | GMAC_NCR_TXEN);
-  sam_putreg(priv, SAM_GMAC_NCR, ncr);
+  ncr = sam_getreg(priv, SAM_GMAC_NCR);
+  sam_putreg(priv, SAM_GMAC_NCR, ncr & ~(GMAC_NCR_RXEN | GMAC_NCR_TXEN));
 
   /* Modify the NCFGR register based on the configured board MCK frequency */
 
@@ -2523,7 +2520,6 @@ static void sam_mdcclock(struct sam_gmac_s *priv)
 
   /* Restore RX and TX enable settings */
 
-  ncr |= enables;
   sam_putreg(priv, SAM_GMAC_NCR, ncr);
 }
 
diff --git a/net/send.c b/net/send.c
index 9f7c71f134..2d66f26f0c 100644
--- a/net/send.c
+++ b/net/send.c
@@ -379,7 +379,7 @@ static uint16_t send_interrupt(FAR struct uip_driver_s *dev, FAR void *pvconn,
        * should already be in the ARP table.
        */
 
-#if defined(CONFIG_NET_ETHERNET) && defined (CONFIG_NET_ARP_IPIN)
+#if defined(CONFIG_NET_ETHERNET) && !defined(CONFIG_NET_ARP_IPIN)
       if (pstate->snd_sent != 0 || uip_arp_find(conn->ripaddr) != NULL)
 #endif
         {