Add Ethernet netnsh board configuration example

boards/xtensa/esp32/esp32-core/configs/netnsh/defconfig

@@ -0,0 +1,77 @@
+#
+# This file is autogenerated: PLEASE DO NOT EDIT IT.
+#
+# You can use "make menuconfig" to make any modifications to the installed .config file.
+# You can then do "make savedefconfig" to generate a new defconfig file that includes your
+# modifications.
+#
+# CONFIG_NSH_ARGCAT is not set
+# CONFIG_NSH_CMDOPT_HEXDUMP is not set
+# CONFIG_NSH_CMDPARMS is not set
+CONFIG_ARCH="xtensa"
+CONFIG_ARCH_BOARD="esp32-core"
+CONFIG_ARCH_BOARD_ESP32CORE=y
+CONFIG_ARCH_CHIP="esp32"
+CONFIG_ARCH_CHIP_ESP32=y
+CONFIG_ARCH_STACKDUMP=y
+CONFIG_ARCH_XTENSA=y
+CONFIG_BOARD_LOOPSPERMSEC=16717
+CONFIG_BUILTIN=y
+CONFIG_DEBUG_FEATURES=y
+CONFIG_ESP32_EMAC=y
+CONFIG_ESP32_UART0=y
+CONFIG_EXPERIMENTAL=y
+CONFIG_FS_PROCFS=y
+CONFIG_HAVE_CXX=y
+CONFIG_HAVE_CXXINITIALIZE=y
+CONFIG_IDLETHREAD_STACKSIZE=3072
+CONFIG_INTELHEX_BINARY=y
+CONFIG_MAX_TASKS=16
+CONFIG_MAX_WDOGPARMS=2
+CONFIG_MM_REGIONS=2
+CONFIG_NETDB_DNSCLIENT=y
+CONFIG_NETDB_DNSSERVER_IPv4ADDR=0x08080808
+CONFIG_NETDB_HOSTFILE=y
+CONFIG_NETDEVICES=y
+CONFIG_NETDEV_PHY_IOCTL=y
+CONFIG_NETINIT_DRIPADDR=0xc0a80f01
+CONFIG_NETINIT_IPADDR=0xc0a80f64
+CONFIG_NETINIT_THREAD=y
+CONFIG_NETUTILS_TELNETD=y
+CONFIG_NETUTILS_TFTPC=y
+CONFIG_NETUTILS_WEBCLIENT=y
+CONFIG_NET_ARP_SEND=y
+CONFIG_NET_BROADCAST=y
+CONFIG_NET_ICMP=y
+CONFIG_NET_ICMP_SOCKET=y
+CONFIG_NET_TCP=y
+CONFIG_NET_TCPBACKLOG=y
+CONFIG_NET_TCP_WRITE_BUFFERS=y
+CONFIG_NET_UDP=y
+CONFIG_NFILE_DESCRIPTORS=8
+CONFIG_NFILE_STREAMS=8
+CONFIG_NSH_ARCHINIT=y
+CONFIG_NSH_BUILTIN_APPS=y
+CONFIG_NSH_FILEIOSIZE=512
+CONFIG_NSH_LINELEN=64
+CONFIG_NSH_READLINE=y
+CONFIG_PREALLOC_MQ_MSGS=4
+CONFIG_PREALLOC_TIMERS=4
+CONFIG_PREALLOC_WDOGS=16
+CONFIG_RAM_SIZE=114688
+CONFIG_RAM_START=0x20000000
+CONFIG_RAW_BINARY=y
+CONFIG_RR_INTERVAL=200
+CONFIG_SCHED_HPWORK=y
+CONFIG_SCHED_WAITPID=y
+CONFIG_SDCLONE_DISABLE=y
+CONFIG_SPI=y
+CONFIG_START_DAY=6
+CONFIG_START_MONTH=12
+CONFIG_START_YEAR=2011
+CONFIG_SUPPRESS_CLOCK_CONFIG=y
+CONFIG_SUPPRESS_UART_CONFIG=y
+CONFIG_SYSTEM_NSH=y
+CONFIG_SYSTEM_PING=y
+CONFIG_UART0_SERIAL_CONSOLE=y
+CONFIG_USER_ENTRYPOINT="nsh_main"