SAM3/4 Ethernet: Clone ioctl support from the SAMA5

This commit is contained in:
Gregory Nutt 2014-08-17 06:54:37 -06:00
parent d87013a665
commit ab78e8a0c5
1 changed files with 91 additions and 1 deletions

View File

@ -67,6 +67,7 @@
#include <nuttx/net/mii.h>
#include <nuttx/net/arp.h>
#include <nuttx/net/netdev.h>
#include <nuttx/net/phy.h>
#include "up_arch.h"
#include "up_internal.h"
@ -370,6 +371,9 @@ static int sam_txavail(struct net_driver_s *dev);
static int sam_addmac(struct net_driver_s *dev, const uint8_t *mac);
static int sam_rmmac(struct net_driver_s *dev, const uint8_t *mac);
#endif
#ifdef CONFIG_NETDEV_PHY_IOCTL
static int sam_ioctl(struct net_driver_s *dev, int cmd, long arg);
#endif
/* PHY Initialization */
@ -1759,6 +1763,89 @@ static int sam_rmmac(struct net_driver_s *dev, const uint8_t *mac)
}
#endif
/****************************************************************************
* Function: sam_ioctl
*
* Description:
* Handles driver ioctl calls:
*
* SIOCMIINOTIFY - Set up to received notifications from PHY interrupting
* events.
*
* SIOCGMIIPHY, SIOCGMIIREG, and SIOCSMIIREG:
* Executes the SIOCxMIIxxx command and responds using the request struct
* that must be provided as its 2nd parameter.
*
* When called with SIOCGMIIPHY it will get the PHY address for the device
* and write it to the req->phy_id field of the request struct.
*
* When called with SIOCGMIIREG it will read a register of the PHY that is
* specified using the req->reg_no struct field and then write its output
* to the req->val_out field.
*
* When called with SIOCSMIIREG it will write to a register of the PHY that
* is specified using the req->reg_no struct field and use req->val_in as
* its input.
*
* Parameters:
* dev - Ethernet device structure
* cmd - SIOCxMIIxxx command code
* arg - Request structure also used to return values
*
* Returned Value: Negated errno on failure.
*
* Assumptions:
*
****************************************************************************/
#ifdef CONFIG_NETDEV_PHY_IOCTL
static int sam_ioctl(struct net_driver_s *dev, int cmd, long arg)
{
struct sam_emac_s *priv = (struct sam_emac_s *)dev->d_private;
int ret;
switch (cmd)
{
#ifdef CONFIG_ARCH_PHY_INTERRUPT
case SIOCMIINOTIFY: /* Set up for PHY event notifications */
{
struct mii_iotcl_notify_s *req = (struct mii_iotcl_notify_s *)((uintptr_t)arg);
ret = phy_notify_subscribe(dev->d_ifname, req->pid, req->signo, req->arg);
}
break;
#endif
case SIOCGMIIPHY: /* Get MII PHY address */
{
struct mii_ioctl_data_s *req = (struct mii_ioctl_data_s *)((uintptr_t)arg);
req->phy_id = priv->phyaddr;
ret = OK;
}
break;
case SIOCGMIIREG: /* Get register from MII PHY */
{
struct mii_ioctl_data_s *req = (struct mii_ioctl_data_s *)((uintptr_t)arg);
ret = sam_phyread(priv, req->phy_id, req->reg_num, &req->val_out);
}
break;
case SIOCSMIIREG: /* Set register in MII PHY */
{
struct mii_ioctl_data_s *req = (struct mii_ioctl_data_s *)((uintptr_t)arg);
ret = sam_phywrite(priv, req->phy_id, req->reg_num, req->val_in);
}
break;
default:
ret = -ENOTTY;
break;
}
return ret;
}
#endif /* CONFIG_NETDEV_PHY_IOCTL */
/****************************************************************************
* Function: sam_phydump
*
@ -2842,10 +2929,13 @@ void up_netinitialize(void)
#ifdef CONFIG_NET_IGMP
priv->dev.d_addmac = sam_addmac; /* Add multicast MAC address */
priv->dev.d_rmmac = sam_rmmac; /* Remove multicast MAC address */
#endif
#ifdef CONFIG_NETDEV_PHY_IOCTL
priv->dev.d_ioctl = sam_ioctl; /* Support PHY ioctl() calls */
#endif
priv->dev.d_private = (void*)&g_emac; /* Used to recover private state from dev */
/* Create a watchdog for timing polling for and timing of transmisstions */
/* Create a watchdog for timing polling for and timing of transmissions */
priv->txpoll = wd_create();
if (!priv->txpoll)