Add support for the Atollic 'Lite' toolchain in all STM32 F4 configurations

git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@4417 42af7a65-404d-4744-a932-0658087f49c3

arch/arm/src/Makefile

@@ -119,11 +119,6 @@ endif
 	@$(NM) $(NUTTX)$(EXEEXT) | \
 	grep -v '\(compiled\)\|\(\$(OBJEXT)$$\)\|\( [aUw] \)\|\(\.\.ng$$\)\|\(LASH[RL]DI\)' | \
 	sort > $(TOPDIR)/System.map
-	@export vflashstart=`$(OBJDUMP) --all-headers $(NUTTX)$(EXEEXT) | grep _vflashstart | cut -d' ' -f1`;  \
-	if [ ! -z "$$vflashstart" ]; then \
-		$(OBJCOPY) $(OBJCOPYARGS) --adjust-section-vma=.vector=0x$$vflashstart $(NUTTX)$(EXEEXT) $(NUTTX).flashimage; \
-		mv $(NUTTX).flashimage $(NUTTX)$(EXEEXT); \
-	fi
 
 # This is part of the top-level export target
 

arch/arm/src/c5471/c5471_irq.c

@@ -1,8 +1,8 @@
 /****************************************************************************
  * arch/arm/src/c5471/c5471_irq.c
  *
- *   Copyright (C) 2007, 2009, 2011 Gregory Nutt. All rights reserved.
- *   Author: Gregory Nutt <spudmonkey@racsa.co.cr>
+ *   Copyright (C) 2007, 2009, 2011-2012 Gregory Nutt. All rights reserved.
+ *   Author: Gregory Nutt <gnutt@nuttx.org>
  *
  * Redistribution and use in source and binary forms, with or without
  * modification, are permitted provided that the following conditions
@@ -65,17 +65,15 @@ volatile uint32_t *current_regs;
  * Private Data
  ****************************************************************************/
 
-/* The value of _vflashstart is defined in ld.script.  It
- * could be hard-coded because we know that correct IRAM
- * area is 0xffc00000.
+/* The value of _svectors is defined in ld.script.  It could be hard-coded
+ * because we know that correct IRAM area is 0xffc00000.
  */
 
 extern int _svectors; /* Type does not matter */
 
-/* The C5471 has FLASH at the low end of memory.  The
- * rrload bootloaer will catch all interrupts and re-vector
- * them to vectors stored in IRAM.  The following table is
- * used to initialize those vectors.
+/* The C5471 has FLASH at the low end of memory.  The rrload bootloaer will
+ * catch all interrupts and re-vector them to vectors stored in IRAM.  The
+ * following table is used to initialize those vectors.
  */
 
 static up_vector_t g_vectorinittab[] =

arch/arm/src/dm320/dm320_irq.c

@@ -1,8 +1,8 @@
 /************************************************************************
  * arch/arm/src/dm320/dm320_irq.c
  *
- *   Copyright (C) 2007, 2009 Gregory Nutt. All rights reserved.
- *   Author: Gregory Nutt <spudmonkey@racsa.co.cr>
+ *   Copyright (C) 2007, 2009, 2012 Gregory Nutt. All rights reserved.
+ *   Author: Gregory Nutt <gnutt@nuttx.org>
  *
  * Redistribution and use in source and binary forms, with or without
  * modification, are permitted provided that the following conditions
@@ -63,9 +63,8 @@ volatile uint32_t *current_regs;
  * Private Data
  ************************************************************************/
 
-/* The value of _vflashstart is defined in ld.script.  It
- * could be hard-coded because we know that correct IRAM
- * area is 0xffc00000.
+/* The value of _svectors is defined in ld.script.  It could be hard-
+ * coded because we know that correct IRAM area is 0xffc00000.
  */
 
 extern int _svectors; /* Type does not matter */

arch/avr/src/Makefile

@@ -119,11 +119,6 @@ nuttx: $(HEAD_OBJ) board/libboard$(LIBEXT)
 	@$(NM) $(NUTTX)$(EXEEXT) | \
 	grep -v '\(compiled\)\|\(\$(OBJEXT)$$\)\|\( [aUw] \)\|\(\.\.ng$$\)\|\(LASH[RL]DI\)' | \
 	sort > $(TOPDIR)/System.map
-	@export vflashstart=`$(OBJDUMP) --all-headers $(NUTTX)$(EXEEXT) | grep _vflashstart | cut -d' ' -f1`;  \
-	if [ ! -z "$$vflashstart" ]; then \
-		$(OBJCOPY) $(OBJCOPYARGS) --adjust-section-vma=.vector=0x$$vflashstart $(NUTTX)$(EXEEXT) $(NUTTX).flashimage; \
-		mv $(NUTTX).flashimage $(NUTTX)$(EXEEXT); \
-	fi
 
 # This is part of the top-level export target
 

arch/hc/src/Makefile

@@ -115,11 +115,6 @@ endif
 	@$(NM) $(NUTTX)$(EXEEXT) | \
 	grep -v '\(compiled\)\|\(\$(OBJEXT)$$\)\|\( [aUw] \)\|\(\.\.ng$$\)\|\(LASH[RL]DI\)' | \
 	sort > $(TOPDIR)/System.map
-	@export vflashstart=`$(OBJDUMP) --all-headers $(NUTTX)$(EXEEXT) | grep _vflashstart | cut -d' ' -f1`;  \
-	if [ ! -z "$$vflashstart" ]; then \
-		$(OBJCOPY) $(OBJCOPYARGS) --adjust-section-vma=.vector=0x$$vflashstart $(NUTTX)$(EXEEXT) $(NUTTX).flashimage; \
-		mv $(NUTTX).flashimage $(NUTTX)$(EXEEXT); \
-	fi
 
 # This is part of the top-level export target
 

arch/mips/src/Makefile

@@ -108,11 +108,6 @@ nuttx: $(HEAD_OBJ) board/libboard$(LIBEXT)
 	@$(NM) $(NUTTX)$(EXEEXT) | \
 	grep -v '\(compiled\)\|\(\$(OBJEXT)$$\)\|\( [aUw] \)\|\(\.\.ng$$\)\|\(LASH[RL]DI\)' | \
 	sort > $(TOPDIR)/System.map
-	@export vflashstart=`$(OBJDUMP) --all-headers $(NUTTX)$(EXEEXT) | grep _vflashstart | cut -d' ' -f1`;  \
-	if [ ! -z "$$vflashstart" ]; then \
-		$(OBJCOPY) $(OBJCOPYARGS) --adjust-section-vma=.vector=0x$$vflashstart $(NUTTX)$(EXEEXT) $(NUTTX).flashimage; \
-		mv $(NUTTX).flashimage $(NUTTX)$(EXEEXT); \
-	fi
 
 # This is part of the top-level export target
 

arch/sh/src/Makefile

@@ -93,11 +93,6 @@ endif
 	@$(NM) $(TOPDIR)/$@ | \
 	grep -v '\(compiled\)\|\(\$(OBJEXT)$$\)\|\( [aUw] \)\|\(\.\.ng$$\)\|\(LASH[RL]DI\)' | \
 	sort > $(TOPDIR)/System.map
-	@export vflashstart=`$(OBJDUMP) --all-headers $(TOPDIR)/$@ | grep _vflashstart | cut -d' ' -f1`;  \
-	if [ ! -z "$$vflashstart" ]; then \
-		$(OBJCOPY) --adjust-section-vma=.vector=0x$$vflashstart $(TOPDIR)/$@ $(TOPDIR)/$@.flashimage; \
-		mv $(TOPDIR)/$@.flashimage $(TOPDIR)/$@; \
-	fi
 
 # This is part of the top-level export target
 

arch/x86/src/Makefile

@@ -121,11 +121,6 @@ endif
 	@$(NM) $(NUTTX)$(EXEEXT) | \
 	grep -v '\(compiled\)\|\(\$(OBJEXT)$$\)\|\( [aUw] \)\|\(\.\.ng$$\)\|\(LASH[RL]DI\)' | \
 	sort > $(TOPDIR)/System.map
-	@export vflashstart=`$(OBJDUMP) --all-headers $(NUTTX)$(EXEEXT) | grep _vflashstart | cut -d' ' -f1`;  \
-	if [ ! -z "$$vflashstart" ]; then \
-		$(OBJCOPY) $(OBJCOPYARGS) --adjust-section-vma=.vector=0x$$vflashstart $(NUTTX)$(EXEEXT) $(NUTTX).flashimage; \
-		mv $(NUTTX).flashimage $(NUTTX)$(EXEEXT); \
-	fi
 
 # This is part of the top-level export target