board/stm32f401rc-rs485: Add support to Mass Storage

Signed-off-by: Rodrigo Sim rcsim10@gmail.com

Documentation/platforms/arm/stm32f4/boards/stm32f401rc-rs485/index.rst

@@ -523,4 +523,19 @@ NSH commands::
        56 bytes from 10.42.0.1: icmp_seq=1 time=0.0 ms
        ...
        10 packets transmitted, 10 received, 0% packet loss, time 10100 ms
-       rtt min/avg/max/mdev = 0.000/0.000/0.000/0.000 ms
+       rtt min/avg/max/mdev = 0.000/0.000/0.000/0.000 ms
+
+usbmsc
+------
+
+Configures the NuttShell (nsh), enables a serial console on USART6 and enables USB Mass Storage.
+NSH commands::
+
+       nsh> msconn
+       mcsonn_main: Creating block drivers
+       mcsonn_main: Configuring with NLUNS=1
+       mcsonn_main: handle=0x20004c10
+       mcsonn_main: Bind LUN=0 to /dev/mmcsd0
+       mcsonn_main: Connected
+
+       nsh> msdis

boards/arm/stm32/stm32f401rc-rs485/configs/usbmsc/defconfig

@@ -0,0 +1,74 @@
+#
+# This file is autogenerated: PLEASE DO NOT EDIT IT.
+#
+# You can use "make menuconfig" to make any modifications to the installed .config file.
+# You can then do "make savedefconfig" to generate a new defconfig file that includes your
+# modifications.
+#
+# CONFIG_ARCH_FPU is not set
+# CONFIG_MMCSD_HAVE_WRITEPROTECT is not set
+# CONFIG_MMCSD_SPI is not set
+# CONFIG_NSH_ARGCAT is not set
+# CONFIG_NSH_CMDOPT_HEXDUMP is not set
+CONFIG_ARCH="arm"
+CONFIG_ARCH_BOARD="stm32f401rc-rs485"
+CONFIG_ARCH_BOARD_STM32F401RC_RS485=y
+CONFIG_ARCH_BUTTONS=y
+CONFIG_ARCH_CHIP="stm32"
+CONFIG_ARCH_CHIP_STM32=y
+CONFIG_ARCH_CHIP_STM32F401RC=y
+CONFIG_ARCH_INTERRUPTSTACK=2048
+CONFIG_ARCH_IRQBUTTONS=y
+CONFIG_ARCH_STACKDUMP=y
+CONFIG_BOARD_LOOPSPERMSEC=8499
+CONFIG_BUILTIN=y
+CONFIG_EXAMPLES_BUTTONS=y
+CONFIG_EXAMPLES_BUTTONS_NAME0="SW3"
+CONFIG_EXAMPLES_BUTTONS_NAME1="SW4"
+CONFIG_EXAMPLES_BUTTONS_NAME2="SW5"
+CONFIG_EXAMPLES_BUTTONS_NAME3="SW6"
+CONFIG_EXAMPLES_BUTTONS_NAMES=y
+CONFIG_EXAMPLES_BUTTONS_QTD=4
+CONFIG_FAT_LCNAMES=y
+CONFIG_FAT_LFN=y
+CONFIG_FS_FAT=y
+CONFIG_FS_PROCFS=y
+CONFIG_HAVE_CXX=y
+CONFIG_HAVE_CXXINITIALIZE=y
+CONFIG_INIT_ENTRYPOINT="nsh_main"
+CONFIG_INPUT=y
+CONFIG_INPUT_BUTTONS=y
+CONFIG_INPUT_BUTTONS_LOWER=y
+CONFIG_INTELHEX_BINARY=y
+CONFIG_MMCSD=y
+CONFIG_MMCSD_SDIO=y
+CONFIG_NSH_ARCHINIT=y
+CONFIG_NSH_BUILTIN_APPS=y
+CONFIG_NSH_DISABLE_IFUPDOWN=y
+CONFIG_NSH_FILEIOSIZE=512
+CONFIG_NSH_LINELEN=64
+CONFIG_NSH_READLINE=y
+CONFIG_PREALLOC_TIMERS=4
+CONFIG_RAM_SIZE=98304
+CONFIG_RAM_START=0x20000000
+CONFIG_RAW_BINARY=y
+CONFIG_RR_INTERVAL=200
+CONFIG_SCHED_HPWORK=y
+CONFIG_SCHED_WAITPID=y
+CONFIG_SPI=y
+CONFIG_START_DAY=5
+CONFIG_START_MONTH=5
+CONFIG_START_YEAR=2014
+CONFIG_STM32_JTAG_SW_ENABLE=y
+CONFIG_STM32_OTGFS=y
+CONFIG_STM32_PWR=y
+CONFIG_STM32_SDIO=y
+CONFIG_STM32_SDIO_CARD=y
+CONFIG_STM32_USART6=y
+CONFIG_SYSTEM_NSH=y
+CONFIG_SYSTEM_USBMSC=y
+CONFIG_TASK_NAME_SIZE=0
+CONFIG_USART6_SERIAL_CONSOLE=y
+CONFIG_USBDEV=y
+CONFIG_USBMSC=y
+CONFIG_USBMSC_REMOVABLE=y

boards/arm/stm32/stm32f401rc-rs485/src/CMakeLists.txt

@@ -56,6 +56,10 @@ if(CONFIG_STM32_PWM)
   list(APPEND SRCS stm32_pwm.c)
 endif()
 
+if(CONFIG_USBMSC)
+  list(APPEND SRCS stm32_usbmsc.c)
+endif()
+
 target_sources(board PRIVATE ${SRCS})
 
 if(CONFIG_ARCH_CHIP_STM32F401RC)

boards/arm/stm32/stm32f401rc-rs485/src/Make.defs

@@ -59,6 +59,10 @@ ifeq ($(CONFIG_STM32_PWM),y)
 CSRCS += stm32_pwm.c
 endif
 
+ifeq ($(CONFIG_USBMSC),y)
+CSRCS += stm32_usbmsc.c
+endif
+
 DEPPATH += --dep-path board
 VPATH += :board
 CFLAGS += ${INCDIR_PREFIX}$(TOPDIR)$(DELIM)arch$(DELIM)$(CONFIG_ARCH)$(DELIM)src$(DELIM)board$(DELIM)board

boards/arm/stm32/stm32f401rc-rs485/src/stm32_usbmsc.c

@@ -0,0 +1,70 @@
+/****************************************************************************
+ * boards/arm/stm32/stm32f401rc-rs485/src/stm32_usbmsc.c
+ *
+ * Licensed to the Apache Software Foundation (ASF) under one or more
+ * contributor license agreements.  See the NOTICE file distributed with
+ * this work for additional information regarding copyright ownership.  The
+ * ASF licenses this file to you under the Apache License, Version 2.0 (the
+ * "License"); you may not use this file except in compliance with the
+ * License.  You may obtain a copy of the License at
+ *
+ *   http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
+ * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.  See the
+ * License for the specific language governing permissions and limitations
+ * under the License.
+ *
+ ****************************************************************************/
+
+/****************************************************************************
+ * Included Files
+ ****************************************************************************/
+
+#include <nuttx/config.h>
+
+#include <stdio.h>
+#include <syslog.h>
+#include <errno.h>
+
+#include <nuttx/board.h>
+
+#include "stm32.h"
+
+/****************************************************************************
+ * Pre-processor Definitions
+ ****************************************************************************/
+
+/* Configuration ************************************************************/
+
+#ifndef CONFIG_SYSTEM_USBMSC_DEVMINOR1
+#  define CONFIG_SYSTEM_USBMSC_DEVMINOR1 0
+#endif
+
+/****************************************************************************
+ * Public Functions
+ ****************************************************************************/
+
+/****************************************************************************
+ * Name: board_usbmsc_initialize
+ *
+ * Description:
+ *   Perform architecture specific initialization of the USB MSC device.
+ *
+ ****************************************************************************/
+
+int board_usbmsc_initialize(int port)
+{
+  /* If system/usbmsc is built as an NSH command, then SD slot should
+   * already have been initialized in board_app_initialize()
+   * (see stm32_appinit.c).
+   * In this case, there is nothing further to be done here.
+   */
+
+#ifndef CONFIG_NSH_BUILTIN_APPS
+  return stm32_mmcsd_initialize(port, CONFIG_SYSTEM_USBMSC_DEVMINOR1);
+#else
+  return OK;
+#endif
+}